Bharat Sanchar Nigam Limited-BSNL has published Tender For Internal And External Painting, Repairs And Refurbishing Of Toilet Fittings, Repairs In Suits In Inspection Quarters At Shantinagar, Hubballi, 2Nd Call. Submission Date for this Tender is 26-04-2024. Toilet Bathroom Tenders in hubballi Karnataka. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling W.C. Pan of all sizesincluding disposal of dismantled materials i/c malba all complete as per directions ofEngineer-in Charge. |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish dumping ground within 50m lead excluding the cost of scaffolding. |
| 3 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 4 | With cement mortar 1:4 (1 cement : 4 fine sand) |
| 5 | Removing layer of algae/fungus growth above terrace surface with scrapper/brush application and detergent water including grouting of cracks, touch up of surface patch with cement paste etc. complete |
| 6 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 7 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty |
| 8 | Float glass panes of thickness 4 mm (weight not less than 10kg/sqm) |
| 9 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complet |
| 10 | 250 x 16 mm |
| 11 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 12 | 300x10 mm |
| 13 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 14 | 100 mm |
| 15 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete |
| 16 | Twin rubber stopper |
| 17 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge. |
| 18 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC "C" channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of |
| 19 | which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side and |
| 20 | joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the "C" Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer"s specification & drawing. |
| 21 | 30 mm thick plain PVC door shutters |
| 22 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 23 | For fixed portion |
| 24 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 25 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 26 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 27 | Easoning of steel windows by oiling to hinges welding to shutter /frameetc where ever required etc all complete as directed by the Engineer in charge. |
| 28 | Steel windows of area up to 1.80 sqm |
| 29 | Taking out existing Aluminium door shutter, repairing and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 30 | Removing weeds grown on walls/terrace along with roots,cleaning the spot and pouring the dilute acid so that weed should not grow in future with necessery ladder,ropeand wooden plank arrangement etc all complete as directed by the Engineer in charge. |
| 31 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 32 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 33 | 10 litre capacity - White |
| 34 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 35 | 15 mm nominal outer dia. pipes. |
| 36 | 20 mm nominal outer dia. pipes. |
| 37 | 25 mm nominal outer dia. pipes. |
| 38 | 40 mm nominal outer dia. pipes. |
| 39 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 40 | Semi rigid pipe |
| 41 | 32 mm dia |
| 42 | Providing and fixing PTMT grating of approved quality and colour. |
| 43 | Circular type. |
| 44 | 100 mm nominal dia. |
| 45 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 46 | W.C. pan with ISI marked white solid plastic seat and lid |
| 47 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 48 | 100 mm inlet and 75 mm outlet PVC trap |
| 49 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 50 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound )content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 51 | a) Two coats |
| 52 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 53 | a) One or more coats on old work |
| 54 | Distempering with 1st quality acrylic distemper, having VOC content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 55 | a) One or more coat |
| 56 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade |
| 57 | a) Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface |
| 58 | Providing and fixing on wall C P Brass soap dish with CP Brass holder & glass dish (JAQUAR model ACN-1131N or equivalent) with matching screws etc. complete. |
| 59 | Providing and fixing on wall face Health Faucet of ABS Body including 1.20 Meter Long PVC flexible pipe & Wall Hook |
| 60 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete |
| 61 | Providing and fixing flexible/washable nylon mosquitomesh of approved make NETLON or equivalent with necessary velcro and fixing to the existing frame with necessary adhesive all complete as directed by Engineer-in-Charge |
| 62 | Cleaning of toilet intensively to remove dirt, hard water stains, yellwo sticky patches in the corners, of daddo tilestile joints, W/C pan, W/B pan, water taps, exhaust fan, Gyser, flush tank etc. removing hard water stains, dirt deposit from floor tiles, with scrubing maching using soft fibre pads and application of sofetning chemicals, mopping out entire toilet & fittings with fibre cloth and placing in position toileteries removed for cleaning complete as directed.(Note- The work shall be carried out by specialised technicians having experince of intensive cleaning job) |
| 63 | a) Room attached toilet of tile area of 15sqm to 25sqm |
| 64 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in charge |
| 65 | Powder coated minimum thickness 50 micron aluminium |
| 66 | Providing and applying non shrink high strength powder crack filler of Dr.Fixit crack powder after opening the crack by grinder to ascertain its actual width and depth after making the surface free from oil,dust and grease.Dr.Fixit crack X powder to be applied in paste form by adding clean water in proportion as specified by manufacturer and then press into the crack by using a spatulla or putty knife etc. all complete as per direction of Engineer in charge. (The work is to be carried out at all heights including necessary scaffolding, zoola etc.) |
| 67 | Providing & fixing anodised aluminium mechanically operated louver6 to 8 nos blades (length about 0.60 m) heavy duty havingaluminium channel holder about 100 mm wide and fixed on Aluminium frame work which will be paid separtely with necessary screws etc. all complete as per direction of Engineer in charge. |
| 68 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 69 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 70 | Removing and refixing of wash basin for maintenance and repair works including fixing with new brackets, screws etc. complete as per the direction of Engineer-in-charge. |
| 71 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 72 | 15 mm nominal bore, 90 mm long, weighing not less than 93 gms |
| 73 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 74 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 75 | Providing and fixing PTMT Piller cock of approved quality and colour. |
| 76 | 15 mm nominal bore, 125 mm long, weighing not lessthan 120 gms |
| 77 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms |
| 78 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms |
| 79 | Demolishing lime concrete manually/by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
