Military Engineer Services-MES has published Provn Of 1X Bathroom And 2X Toilet With Allied Services Adjacent To Ug(Bldg No P-09), Hard Standing Near Existing Hardstanding,Deep Freezer And Wodden Panelling In Building No T-36 (Barber Shop) In The Aor Of Age B/R-1 Under Ge Khumbathang. Submission Date for this Tender is 07-05-2024. Freezer Tenders in Khumbathang Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 16fd731c-8dcf-442c-9c2f-96b7da3909b2.html | Tender Notice | 0 KB |
| BOQ_728009.xls | Tender Document | 0 KB |
| Tender42.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in any type ofsoil complete all as specified and directed by Eng-in-Charge. |
| 2 | Excavation in trenches not exceeding 1.5m in depth and getting out in any type of soil including cutting of roots/ branches below ground level where ever required complete all as specified and directed by Eng-in-Charge. . |
| 3 | M&L for cement concrete in foundation, filling and mass concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) complete all as specified and directed by Eng-in-Charge. |
| 4 | M&L for RCC Type B-1, 1:2:4 using 20mm graded crushed stone aggregateFoundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Eng-in-Charge. |
| 5 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work vertical or to batter complete all as specified and directed by Eng-in-Charge. |
| 6 | M&L for RCC type B-1, 1:2:4 using 20 mm graded crushed stone aggregate for Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and inshelves and the like complete all as specified and directed by Eng-in-Charge. |
| 7 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs,beams, landings,chajjas and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Eng-in-Charge. |
| 8 | M&L for RCC type B-1 1:2:4 using 20mm graded crushed stone aggregateRoof Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Eng-in-Charge. |
| 9 | M&L for Formwork in square, rectangular or polygonal to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed by Eng-in-Charge. |
| 10 | M&L for RCC Type B-1, 1:2:4 using 20mm graded crushed stone aggregateColumns, pillars, piers, posts and struts complete all as specified and directed by Eng-in-Charge. |
| 11 | M&L TMT bars 10 mm dia and over ,cut to length bent to shape required incl cranking, bending, spirally hooping for columnsand binding with MS wire (annealed) not less than 0.90mm dia wire etc complete all as specified and directed by Eng-in-Charge. |
| 12 | All as per Item No 11.00 above but8 mm dia TMT bars complete all as specified and directed by Eng-in-Charge. |
| 13 | M&L for .Pre-cast cement concrete block masonry type C-1,1:3:6 (using 16mm graded stone aggregate) with solid blocksexc. 10 cm in width and setting in cement mortar 1:6 , complete all as specified and directed by Eng-in-Charge. |
| 14 | M&L for moorum/red bajrai filling in floors or pavings, laid in layers n Exc 15cm thick spread, levelled and ramms including watering complete all as specified and directed by Eng-in-Charge. |
| 15 | M&L hard core of broken stone of gauge n.exc 63 mm but n.exc 100 mm deposited spread and leveled in layers n.exc 10 cm thick ,water and rammed true surfacein plinth protection/ hard standing complete all as specified and directed by Eng-in-Charge. |
| 16 | M&L 100mm thick PCC type D-2, 1:4:8 (40mm graded crushed stone aggregate) laid in floor sub base cement concrete complete all as specified and directed by Eng-in-Charge. |
| 17 | M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregate) finishing surface even and smooth without using extra cement complete all as specified and directed by Eng-in-Charge. |
| 18 | M&L for rendering to brick wall surfaces, 15mm thick in cement mortar 1:4, with WPC (as per manufactures instructions)complete all as specified and directed by Eng-in-Charge. Note :- WPC should measured and paid separately |
| 19 | Supply only integral water proofing compound complete all as specified and directed by Eng-in-Charge. |
| 20 | M&L for rendering to brick wall surfaces, 15mm thick in cement mortar 1:6, finish even and smooth with or without using extra cement complete all as specified and directed by Eng-in-Charge. |
| 21 | Preparation of newly plastered surfaces of wallsand finishing walls with two coats of premium acrylic smooth exterior paint with silicone additives of required shade @ 1.43 Ltr/10Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10Sqm) using of all scaffolding, trestles, ladders, cradles which are necessary for execution of work and protective measures including removing of nails,making good holes, cracks, washing floors, cleaning glass, joinery, electric fitting, wiring etc of drops and splashes and leaving premise,clean and tidy complete all as specified and directed by Eng-in-Charge. |
| 22 | Preparation of newly plastered surfaces andapplying two coats of oil bound distemper on surfaces of walls over a coat of primer over 2mm thick wall care putty including preparation of surfaces complete all as specified and as directed by Engineer-In-Charge. |
| 23 | M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:6for laying floor finishes complete all as specified and directed by Eng-in-Charge. |
| 24 | M & L for non skid ceramic coloured /printedtiles of area exc 0.11 sqm and n.exc 0.18 sqm, 6 to 7 mm thick, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles complete all as specified and directed by Eng-in-Charge. (Screed bed shall be measured and paid for separately) |
| 25 | M&L for rendering to brick wall surfaces, 10mm thick in cement mortar 1:4, as backing coat for scoured for fixing tiles /stone slabs etc complete all as specified and directed by Eng-in-Charge. |
| 26 | M&L for glazed ceramic coloured / printed tiles 350mm x 250mmx7mm/450mmx350mmx7mm thick, as in skirting/ dado set and jointed in neat cement slurry and pointed in white/coloured cement to match the tiles complete all as specified and directed by Eng-in-Charge.(Screed bed shall be measured and paid for separately) |
| 27 | Providing, cement concrete type C-1 1:3:6 (using 20mm graded crushed stone aggregate as in roof kerbs or mud stops and plinth protection rounded or chamfered on edges complete all as specified and directed by Eng-in-Charge. |
| 28 | Supply and fixing ofRoof trusses (framed),Fe-410 W(GdeE-250)quality trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed by Eng-in-Charge. |
| 29 | Supply and fixing of Plates (plain or chequered) 5mm thick or over includingforming holes, without any attachment complete all as specified and directed by Eng-in-Charge. |
| 30 | Supply and fixing of Mild steel rag or lewis bolts with dia of neck 20mm, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, exc 15cm long and n exc 30cm long complete all as specified and directed by Eng-in-Charge. |
| 31 | Supply and fixing for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Eng-in-Charge. |
| 32 | Supply and fixingfor Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Eng-in-Charge. |
| 33 | Supply and fixing of solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge |
| 34 | Supply and fixing of 30 mm thick factory made PVC rigid frame panel door shutter made from MS tubular frame of gauge 19 x 19 mm style and 15 mm x 15 mm top and bottom rails MS frame to be covered with 5 mm thick heat moulded PVC "C" channel of size 50mm x 30mm for stileswith 5mm thick PVC sheet (50 mm wide for top rail, 75 mm wide for lock rail and bottom rail on either side). Paneling of 5 mm thick PVC sheetto be fitted in the MS frame, sealed to the styles and rails with 25 mm thick PVC sheet beading on either side and joined together with cement solvent adhesive complete all as specified and as directed by the Engineer-in-Charge |
| 35 | Supply and fixing of 100 mm long stainless steel butt hinges for PVC door frame complete all as specified and as directed by the Engineer-in-Charge |
| 36 | Supply and fixing of 150 mm size extruded aluminium door handles fabricated type complete all as specified and directed by Eng-in-Charge. |
| 37 | Supply and fixing of Aluminum anodized barrel tower bolt of extruded section 200mm long complete all as specified and directed by Eng-in-Charge. |
| 38 | Supply and fixing of Mild steel sliding door bolts,plate type,stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and (250mm length of bolt) complete all as specified and directed by Eng-in-Charge. |
| 39 | Supply and fixing of anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Eng-in-Charge. |
| 40 | Supply and fixing of anodised aluminium window and ventilator shutters, side hung/top hung type with or without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Eng-in-Charge. |
| 41 | Supply and fixing in repair vitreous china ware wash hand basin 550mmx 400 mm size flat back or angle including new bracket and making good all connectionscomplete all as directed by the Engr-in-Charge. |
| 42 | Supply and fixing of 32mm Dia PVC waste pipe for sinks or wash basines etc,. in repairs complete all as directed by the Engr-in-Charge. |
| 43 | Supply and fixing of 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixedin repairs complete all as directed by the Engr-in-Charge. |
| 44 | Supply and fixing of Bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm dia complete all as specified and directed by Eng-in-Charge. |
| 45 | Supply and fixingin repair 15 mm bore piller cocks tall fancy type,cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred "HOT or COLD" with long screwed sunk and fly nuts complete all as specified and directed by Eng-in-Charge. |
| 46 | Supply and fixing of angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair.(15mm bore) complete all as specified and directed by Eng-in-Charge. |
| 47 | Supply and fixing of PVC connection 15 mm bore LDPE pipe 45cm long withbrass nuts and washers on both ends all asin repairs complete all as specified and directed by Eng-in-Charge. |
| 48 | Supply only 600mmx450mm bevelled edge mirror of selected quality glass, and fixed to wall withchromium plated screw studscomplete all as specified and directed by Eng-in-Charge. |
| 49 | Supply and fixingin repair Vitreous China squatting pan of pattern “Orissa pattern”, size 580x440 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern n including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor (excluding flushing cistern and flush pipe) complete all as specified and directed by Eng-in-Charge. |
| 50 | Supply and fixing of vitreous china wash down water closet pan (Pedestal type),Indo- western white includingremoving the existing onecomplete and making good all connections complete all as specified and directed by Eng-in-Charge. |
| 51 | Supply and fixing in white /black plastic seat coversolid confirming to ISI any type complete all as specified and directed by Eng-in-Charge. |
| 52 | Supply and fixing of10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe complete as in repairs complete all as specified and directed by Eng-in-Charge. |
| 53 | Supply and fixing of towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws andwooden/plastic cleats and fixed in repairs complete all as specified and directed by Eng-in-Charge. |
| 54 | Supply and fixing in repair sheet glassshelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed by Eng-in-Charge. |
| 55 | Supply and fixin of chromium plated shower rose 125mm size with shower arm 195mm long including fixing to steel pipe or union complete all as specified and directed by Eng-in-Charge. |
| 56 | Supply and fxing of Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed by Eng-in-Charge. |
| 57 | Supply and fixing of Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed by Eng-in-Charge. |
| 58 | Supply and fixing of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Eng-in-Charge. |
| 59 | Supply and fixing of 75 mm dia PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B-1 complete all as specified and directed by Eng-in-Charge. |
| 60 | Supply and fixing of 75mm bore PVC(SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed by Eng-in-Charge. |
| 61 | Supply and fixing of 110mm bore PVC(SWR) Pipes sinle socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed by Eng-in-Charge. |
| 62 | Supply and fixing of 75mm bore PVC(SWR) bendcomplete all as specified and directed by Eng-in-Charge. |
| 63 | Supply and fixing of 110mm bore PVC(SWR) bend complete all as specified and directed by Eng-in-Charge. |
| 64 | Supply and fixing of steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Eng-in-Charge. |
| 65 | All as per item No 64.00 above but 20mm dia complete all as specified and directed by Eng-in-Charge. |
| 66 | Supply and fixing of 1000 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including complete all as specified and directed by Eng-in-Charge. |
| 67 | Supply and fixingin repairs 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed (minimum weight 15 mm-142gms/20mm-210gms) complete all as specified and directed by Eng-in-Charge. |
| 68 | Supply and fixingin repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe complete all as specified and directed by Eng-in-Charge. |
| 69 | Preparing new or previously untreatediron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Eng-in-Charge. |
| 70 | Returning, filling in, isoilincluding spreading, levelling , watering and well ramming in layers not exc 25 cm etc complete all as specified and directed by Eng-in-Charge. |
| 71 | Removing excavated material soil exc 50 m and n.exc 100 m depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed by Eng-in-Charge. |
| 72 | Excavation over area not exceeding 1.5 m depth and getting out in hard/ dense soil, complete all as specified and directed by Engr-in-Charge. |
| 73 | M&L for 150 mm thick PCC 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) as in sub base concrete in foundation filling and mass concrete, etc. complete all as specified and directed by Eng-in-Charge. |
| 74 | M&L 150 MMthick Cement Concrete work in pavement /hardstanding of flexural strength 40 kg/cm2in field using 400kg of cement per cubic meter, complete all as specified and directed by Eng-in-Charge. |
| 75 | Forming 12mm thick Expansion joints in 150mm thick PCC slab, filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and directed by Eng-in-Charge. |
| 76 | Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade "A" complete all as specified and directed by Eng-in-Charge. |
| 77 | Removing excavated material n.exc 100 m and deposting where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed by engr in charge. |
| 78 | M&L Providing, cement concrete type B-1 (1:2:4) 20 mm graded crushed stone aggregate as in slope concerte of hardstanding, coping, kerbs of mud stops, rounded or chamfered on edges complete all as specified and directed by Eng-in-Charge. |
| 79 | M&L second class hardwood, plain filets, square, rectangular in section of area exc 13 n exc 25 sqcm, clean sawn, secured with mills or brads complete all as specified and directed by Eng-in-Charge. |
| 80 | M&L second class hardwood, plain filets, square, rectangular in section of area exc 3 n exc 6 sqcm, clean sawn, secured with mills or brads complete all as specified and directed by Eng-in-Charge. |
| 81 | M&L second class hardwood, plain filets, square, rectangular in section of area n exc 3 sqcm, clean sawn, secured with mills or brads complete all as specified and directed by Eng-in-Charge. |
| 82 | M&L12 mmthick, prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in wall complete all as specified and directed by Eng-in-Charge. |
| 83 | Supply and fixing of two single core 6 Sq mm for Sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100Volts grade in and including PVC casing capping/ PVC conduit with fixing accessories including one run of 6 Sq mm copper conductor complete all as specified and directed by Eng-in-Charge.(Note - Two runs of 6 Sq mm cable, one run of 6 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.) |
| 84 | Material and labourfor point wiring with 1.5 sqmm cable FRLSPVC insulated, unsheathed copper multistranded conductor, 1100 V grade of size 1.5 sqmm including necessary termination board 1.5 Sqmm PVC insulated unsheathed FRLScopper conductor as earthingand connected to common earthing with PVCheavy duty casing caping/PVC conduit ISI marked as rquired at site along with all accessories and making good the disturbed surfaces of wall/ ceiling etcfor the following : - |
| 85 | (a) One light point/ one fan point/ Bell Point controlled by one switch complete all as specified and directed by Eng-in-Charge. |
| 86 | (b) One 3 pin socket outlet, 5 Amp same board complete all as specified and directed by Eng-in-Charge. |
| 87 | (c) One 3 pin socket outlet, 5 Amp Independent complete all as specified and directed by Eng-in-Charge. |
| 88 | M&L for Ceiling rose3 plates flush type 6 Amps, 250 volts ACISI marked complete all as specified and directed by Eng-in-Charge. |
| 89 | Supply and fixing in repair switch piano flush type single pole one way5 Amps complete all as specified and directed by Eng-in-Charge. |
| 90 | Supply and fixing switch socket combination multi purpose, 5 amp complete all as specified and directed by Eng-in-Charge. |
| 91 | Supply only holder any type for batten fitting complete all as specified and directed by Eng-in-Charge. |
| 92 | Supply and fixing of pressed sheet metal enclosure (MCB DB) single door,single pole and neutral 240 Volt with 200 Amps rated bus bar complete for 04 way complete all as specified and directed by Eng-in-Charge. |
| 93 | Supply and fixing in repairfor Circuit breaker single pole, 6 to 32 Amp 240 volt C curve 10 KA, IP 20complete all as specified and directed by Eng-in-Charge. |
| 94 | M&L in repairfor Circuit breaker single pole & neutral240 volt C curve 10 KA 40 to 63 Amps capacity IP 20 complete all as specified and directed by Eng-in-Charge. |
| 95 | Supply and fixing ofLED light fittings 1x18 watt, 220 volt AC decorative box type with driver, holder including LED tube connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Eng-in-Charge. |
| 96 | Supply and fixing of exhaust fan, steel body AC single phase, 230 volt of size 300 mm sweep with blades and frame and louvers connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Eng-in-Charge. |
| 97 | Material and labour earthing complete with galvanized steel earth plate 60 cm x 60cm x 6.0mm thick buried directly in ground vertically to a depth not less than2.25 mtr below ground level with top edge of the earth plate at a depth not less less than 1.5 mtr filled aroundwith 15 cm thick alternate layers of charcoal dust and salt and connected to earth leadwire 4mm dia (8 SWG) by means of bolt, nut and check nutsand washers of galvanized iron or steel and thimble and other ends of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm bore and watering pipe 20mm dia light grade with funnel and wiremesh, pcc 1:3:6 type C-1 in chambers RCC 1:2:4 type B-1 in pit cover reinforced with 8 mm dia deformed bars 15cm center to center both ways all as directed by Engr-In-Charge, complete all as shown in electric plate No 3 of MES SSR Part I |
| 98 | Material and labourfor point wiring with 2.5 sqmm cable FRLSPVC insulated, unsheathed copper multistranded conductor, 1100 V grade of size 2.5 sqmm including necessary termination board 2.5 Sqmm PVC insulated unsheathed FRLScopper conductor as earthingand connected to common earthing with PVCheavy duty casing caping/PVC conduit ISI marked as rquired at site along with all accessories and making good the disturbed surfaces of wall/ ceiling complete all as specified and directed by Eng-in-Charge. |
| 99 | Supply and fixing of switch socket combination switch socket outlet 3 pin, 16 amp flush type complete all as specified and directed by Engineer - in - Charge. |
| 100 | Supply , installation , testing and commissioning of of Glass Top Deep Freezer single phase 240 volts, 50 Hz of capacity 425 ltrs complete all as specified and directed by Engineer - in - Charge |
| 101 | Supply and fixing of miniature Circuit breaker (MCB) single pole & neutral240 volt C curve 10 KA,32 Amps capacity complete all as specified and directed by Eng-in-Charge. |
| 102 | Deduct Credit for Demolished/Dismantled material Rs (-) 00.00 (Minus) as listed in Schedule "A" Part-II (Credit Schedule) Note :Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the "Contract Sum". |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
