Centre For Development Of Telematics-C-DOT has published Tender For Undertaking Of Civil Works For Construction Of Wash Room At Library, Painting Of Directors Block. Submission Date for this Tender is 08-05-2024. Civil Work Tenders in hosur Karnataka. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 72b67e30-9441-4bf4-9bcc-978133d52f2d.html | Tender Notice | 0 KB |
| BOQ_845177.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Tendernotice_2.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | UNDERTAKING OF CIVIL WORKSAND OTHER ALLIED ACTIVITIES FOR CONSTRUCTION OF WASH ROOMS AT LIBRARY AND PAINTING WORKS ATDIRECTORS BLOCK ON TURN-KEY BASIS |
| 2 | EXTERNAL TERRACOTA PAINTING:SCRUBBING THE EXISTING PAINTING PROPERLY FOR PREPARING THE SMOOTH SURFACE.WALL PAINTING: PROVIDING AND APPLYING 2 COATS OF EXTERIOR EMULSION PAINT. MAKE: EXTERIOR APEX ULTIMA PAINT. NOTE PAINT COLOUR WILL BE DECIDED BY C-DOT. |
| 3 | WALL CLADDING: WALL CLADDING WITH ACRYLIC BOARD WITH NECESSARY ACCESSORIES FOR COMPLETE TURN-KEY JOB. NOTE: PAYMENT WILL BE MADE AS PER ACTUAL MEASUREMENT ONLY.NOTE: ACRYLIC SHEET COLOUR WILL BE DECIDED BY C-DOT. |
| 4 | FLOOR TILES PAINT: SCRUBBINGTHE EXISTING PAINTING PROPERLY FOR PREPARING THE SMOOTH SURFACE ON FLOOR.PROVIDING AND APPLYING 2 COATS OF TERRAOTA FLOOR GUARD PAINT. MAKE: APEX TERRACOTTA FLOOR GUARD PAINT.NOTE: PAINT COLOUR WILL BE SELECTED BY C-DOT. |
| 5 | CEMENT MORTAR & WATER PROOFING WORK: OLD MUDDY ON THE ROOF TOP TO BE REMOVED UP TO THE NAKED ROOF AND DEBRIS CLEARANCE WITHIN C-DOT CAMPUS. CRACKS TO BE FILLED IN THE TOP ROOF WITH GOOD QUALIATY WATER PROOF COMPOUND (DR. FIXIT) AND WATER LEAKAGE TEST DONE FOR MINIMUM PERIOD OF ONE WEEK AND WATER LEAKAGE TEST DONE FOR A MINIMUM PERIOD OF ONE WEEK AND LATER RMC, M.20 CONCRETE NOT LESS THAN 3 INCHES. LATER CEMENT MUDDY NOT LESS THAN 1 INCH TO BE DONE ON TOP OF CONCRETE AND PROPER SLOPE TO BE CREATED FOR EASY WATER FLOW |
| 6 | M.S. HAND RAILS PAINT: PROVIDING AND APPLYING 2 COATS OF SYNTHETIC ENAMEL PAINT FOR STEEL ROD IN HAND RAILS. |
| 7 | WOOD POLISH FOR HAND RAILS:APPLYING POLYURETHANE POLISH FOR EXISTING WOODEN HAND RAILS. |
| 8 | GRANITE STONE WORK FOR STAIRCASE PROVIDING AND LAYING OF POLISHED GRANITE STONE IN REQUIRED DESIGN AND PATTERNS, FOR STAIRCASE PORTIONS OF THE BUILDING AS PER THE EXISTING DESIGN WITH 18 MM THICK STONE SLAB OVER 20 MM (AVERAGE) THICK BASE OF CEMENT MORTAR 1:4 (1 CEMENT 4 COURSE SAND) LAID AND JOINTED WIH CEMENT SLURRY AND POINTING WITH WHITE CEMENT SLURRY AND MIXED WITH PIGMENT OF MATCHING SHADE INCLUDING RUBBING, CURING AND POLISHING ETC., ALL COMPLETE JOB AS SPECIFIED AND AS DIRECTED BY THE SITE IN-CHARGE. NOTE: THE GRANITE COLOUR WILL BE SELECTED BY C-DOT. |
| 9 | MASONRY WORKS: PROVIDING AND LAYING AUTOCLAVED AERATED CEMENT BLOCKS MASONRY WITH 1000/230 MM THICK SOLID BLOCK IN SUPER STRUCTURE ABOVE ;LINTH BEAM LEVEL UP TO ROOF LEVEL IWHT CEMENT MORTAR (1:4). BRAND SOLID BLOCK - ANY ISI APPROVED BLOCK |
| 10 | INTERNAL PLASTERING: PROVIDING AND APPLYING 15 MM THICK PLASTER IN CEMENT MORTAR MIX RATIO CM 1:4 ( 1 CEMENT : 4 M SAND) TO INTERNAL SURFACES OF CONCRETE AND MASONRY WORK |
| 11 | FALSE CEILING:SUPPLY AND FIXING OF ARMSTRONG FALSE CEILING (2" x 2") AT A HEIGHT OF 9 FEET. MAKE: ARMSTRONG MODULAR CEILING TILES WITH FINE FISSURED REGULAR EDGES OFSIZE ( 600MM x 600MM x 16MM)SUPPLY OF ARMSTRONG 24MM FALSE CEILING GRID SYSTEM.TILES COLOUR WILL BE SELECTED BY C-DOT. |
| 12 | FLOORING WORK: SUPPLY AND LAYING OF 12 MM THICK 2" X 2" VETRIFIFED TILES OVER A BED OF 20 MM THICKNESS, CM 1:6 JOINED AND POINTED WITH MATCHING PIGMENT + CEMENT SLURRY AND APPROVED FILLER FINISH TO REQUIRED LEVEL.MAKE: KAJARIA OR EQUIVALENT . NOTE:FLOORING TILE COLOUR WILL BE SELECTED BY C-DOT. |
| 13 | WALL DADOING WORK: PROVIDING AND LAYING OF VITRIFIED WALL TILES OF 12" X 16" 10 MM /TILE, FIXED OVER PRE-PLASTERED ( 12MM THICK) MASONRY / RCC SURFACES BY USING APPROVED COMPATIBLE ADHESIVE ( BAL / LATICRETE OR EQUIVALENT APPROVED) OVER PLASTERED SURFACE TO CORRECT LINE, LEVEL AND PLUMB. MAKE: KAJARIA OR EQUIVALENT. NOTE: WALL TILE COLOUR WILL BE SELECTED BY C-DOT. |
| 14 | TOILET SANITARY WORKS / PLUMBING:PROVIDING NEW PVC 4 INCHES 4 KG PRESSURE ISI WITH NECESSARY BENDS, ELBOWS, NANI TRAP AND COMPLETER TURNKEY JOB.PIPES: PIPES USED FORPLUMBING LINES -SUGGESTED MAKES: ASHIRVAD / SUPREME |
| 15 | VITRIFIED FLOORING WORKS:PROVIDING AND LAYING OF POLISHED GLOSSY VITRIFIED TILES OF SIZE: 600 X 600 X 12 MM THICK FIXED ON EXISTING MOSAIC TILES WITH SPACER JOINTS LINE TO LINE AND LEVEL USING SPECIAL ADHESIVE FOR FLOORING MEETING SPECIFICATION LAID OUT IN IS 15477 (2004). THE TILES SHOULD BE JOINED WITH NEAT CEMENT SLURRY WITH PIGMENT TO MATCH SHADE OF TILES. TILES TO BE LAID UNIFORMLY. MAKE: NITCO / MARBITOR / EURO / KAJARIA OR EQUIVALENT. NOTE: THE TILES COLOUR WILL BE SELECTED BY C-DOT AND THE RATE OF TILES SHOULD BE RS. 90 PER SQ FT |
| 16 | TOILET WATER PLUMBING WORK:SUPPLY AND FIXING OF CPVC ( 1 ") PIPES FOR WATER LINES FOR MENS AND WOMENS WASH ROOM AND PANTRY WITH NECESSARY BENDS, ELBOWS, NANI TRAP AND COMPLETE TURN-KEY JOB. PIPES: PIPES USED FOR PLUMBING LINES - ANY ISI APPROVED BRAND: |
| 17 | WESTERN COMMODES: SUPPLY AND FIXING OF WALL MOUNTED WESTERN COMMODE WITH FLUSH TANK AND NECESSARY ACESSORIES.WESTERN COMMODE: SUGGESTED MAKES - JAGUAR / CERA / HINDWARE |
| 18 | SKIRTING:PROVIDING AND LAYING OF SKIRTING FOR THE ABOVE FLOORING - THICKNESS - 12 MM. SKIRTING HEIGHT - 4" . MAKE: NITCO / MARBITOR / EURO / KAJARIA OR EQUIVALENT.NOTE: THE TILES COLOUR WILL BE SELECTED BY C-DOT AND THE RATE OF TILES SHOULD BE AROUND RS. 90 PER SQ FT |
| 19 | TOILET WASH BASIN :SUPPLY AND FIXING OF WASH BASIN ON 25 MM THICK AND 2"6" WIDTH GRANITE SLAB WITH FULL ROUND NOSING AT ONE EDGE OVER THE MASONRY WALL AND WITH COMPLETE CEMENT WORKS, ALONGWITH ACCESSORIES LIKE PILLAR COK, TAPS, WASTE WATER PIPES. ALSO GRATING WITH HOLE TO BE DONE FOR THE WASH BASIN IN MENS AND WOMENS WASHROOM.SUGGESTED MAKES: CERA / JAGUAR / HINDWARE |
| 20 | PUTTY AND PRIMER WORK, WALL AND CEILING PAINTING :SCRUBBING THE EXISTING PAINTING WITH SAND PAPER / MACHINE SCRUBBING PROPERLY FOR PREPARING THE SMOOTH SURFACE. PROVIDING AND APPLYING 2 COATS OF WALL PUTTY TO INTERNAL WALL AND CEILING. ALL WALL UNDULATIONS SHALL BE COVERED UP USING PUTTY / WHITE CEMENT AND THE WALL SHALL BE BROUGHT TO PROPER LINE AND LEVEL AS PER THE DIRECTIONS OF THE SITE IN-CHARGE. WALL & CEILING PAINTING: PROVIDING & APPLYING 2 COATS OF EMULSION PAINT.MAKE: ASIAN ROYAL EMULSION PAINT. WALL PAINTING: PROVIDING & APPLYING 2 COATS OF EMULSION PAINT.MAKE: ASIAN ROYAL EMULSION PAINT. NOTE: PAINT COLOUR WILL BE SELECTED BY C-DOT |
| 21 | URINALS :PROVIDING AND FIXING OF CERAMIC WHITE URINAL AND WITH GRANITE PARTITION OF APPROVED MAKE WITH NECESSARY SUPPORTS, BOLTS, NUTS ETC.SUGGESTED MAKES: CERA / JAGUAR / HINDWARE. NOTE: BASIC COST OF URINALS IS MINIMUM OF RS. 6,000/- AND PARTITION MINIMUM OF RS. 4,000/- EXCL LABOUR AND GST. |
| 22 | WASH ROOM MAIN DOOR :SUPPLY AND FIXING OF UPVC DOORS OF THICKNESS 30 MM WITH NECESSARY HARDWARE AND NECESSARY CIVIL WORK AND TOTAL TURN-KEY JOB. ALL DOORS WITH BRANDED HANDLES, SS HINGES, DOOR LOCK, DOOR STOPPER, TOWER BOLT, DOOR CLOSERS ETC.MAKE: ANY ISI BRANDED DOOR. NOTE: SELECTION WILL BE DONE BY C-DOT |
| 23 | FLUSH DOORS FOR BATHROOM :SUPPLY AND FIXINGOF NEW UPVC FLUSH DOORS OF THICKNESS 24 MM WITH PROPER ACCESSORIES LIKE HANDLES, DOOR LOCK, TOWER BOLTS, DOOR CLOSERS ETC. MAKE: ANY ISI BRANDED DOOR. NOTE: SELECTION WILL BE DONE BY C-DOT. |
| 24 | OUTER WATER PIPE : CONNECTING EXISTING WATER PIPE WITH THE NEW TANK PROVIDED BY C-DOT WITH UPVC PIPE ( 1 1/2") WITH ALL THE NCESSSARY ACCESSORIES. COMPLETE TURNKEY JOB. SUGGESTED MAKES: ASHIRVAD / SUPREME. |
| 25 | VERTICAL BLINDS FOR WINDOWS: SUPPLY AND FIXING OFVERTICAL BLINDS (BRANDED) FOR WINDOWS: MAKE: ANY ISI APPROVED.SHADE COLOUR TO BE APPROVED BY C-DOT |
| 26 | SUN SHADE: FABRICATING AND ERECTING STEEL FRAME MADE OF STEEL PIPES OR ANGLES OF SIZE 2" X 2" STEEL SQUAE PIPE OF 5 MM THICK FOR TRUSS SECTION AND 1" X 1" STEEL SQUARE PIPE OF 5 MM THICK FOR PURLINES AT THE EXTERNAL WALL TO 0.5 MM THICKNESS PPGI SHEET OF WHICH ACT AS SUNSHADE WITH ALL TURNKEY JOBS. |
| 27 | FROSTED GLASS FILM:PVC 3M FROSTED GLASS FILM THICKNESS: 120 - 140 MICRONS |
| 28 | CHAMBER:CONSTRUCTION OF SEWER CHAMBERS OF REQUIRED INTERNAL DIMENSION OF 300 X 300 MM DEPTH UPTO 0.3 MTR DEPTH WITH BRICK MASONRY IN CEMENT MORTAR 1:5 THICKNESS OF MASONRY 225 MM, 1:3:6 CEMENT CONCRETE FOUNDATION 150 MM THICK OVER 150 MM SAND BED, CHANNELING IN 1:2:4 CEMENT CONCRETE, PLASTERING IN 1:3 CEMENT MORAR FOR INTERNAL AND EXTERNAL SURFACE FINISHED WITH FLOATING COAT OF NEAT CEMENT. NECO MAKE HEAVY DUTY DI MANHOLE COVER WITH HINGED FRAME. FIXED OVER 100 MM P.C.C. INCLUDING PAINTING OF THE FRAME, COVER WITH 2 COATS OF ANTI CORROSIVE BITUMASTIC PAINT OVER A COAT OF PRIMER ALL AS PER SPECIFICATIONS. THE WORK SHALL INCLUDE TOP SLAB OF AROUND 150 MM CONCRETE STRUCTURE FOR THE MENTIONED SIZE AND MAKING ARRANGEMENTS FOR MANHOLE COVER SEATING, NECESSARY EXCAVATION AND BACK FILLING. |
| 29 | LED LIGHT FIXTURES:SUPPLY AND FIXING OF 4 FEET LED FIXTURES FOR TOILETS.SUGGESTED MAKES: GM / HAVELLS / SYSKA |
| 30 | HAND DRIER:SUPPLY AND FIXING OF HAND DRIER - ISI MAKE. SUGGESTED MAKES: DOLPHY / JAQUAR |
| 31 | EXHAUST FAN: SUPPLY AND FIXING OF EXHAUST FANS WITH BIRD METAL MESH 12" ISI MAKE: SUGGESTED MAKES: BAJAJ / HAVELLS / CROMPTON |
| 32 | PUTTY WORK AND PAINTING: PROVIDING AND APPLYING 2 COATS OF WALL PUTTY TO INTERNAL WALL. ALL WALL UNDULATIONS SHOULD BE COVERED UP WITH PUTTY / WHITE CEMENT AND THE WALL SHALL BE BROUGH TO PROPER LINE AND LEVEL AS PER THE DIRECTIONS OF THE SITE IN-CHARGE.CEILING GROOVE FILLING WITH POP. PROVIDING AND APPLYING 2 COATS OF PREMIUM EMULSION IN WASHROOM. MAKE: ASIAN ROYAL EMULSION PAINTS: COLOUR SELECTION WILL BE DONE BY C-DOT |
| 33 | EXTERNAL PAINTING WORK:SCRUBBING THE EXISTING PAINTING PROPERLY FOR PREPARING THE SMOOTH SURFACE. APPLYING EXTERNAL WALL CRACK FILLINGS AND THE WALL SHALL BE BROUGHT TO PROPER LINE AND LEVEL AS PER THE DIRECTIONS OF THE SITE IN-CHARGE. WALL PAINTING: PROVIDING AND APPLYING 2 COATS OF EXTERIOR EMULSION PAINT.MAKE: EXTERIOR APEX ULTIMA PAINT. NOTE: PAINT COLOUR WILL BE DECIDED BY C-DOT |
| 34 | REPLACING GLASS FOR EXTERNAL WINDOWS AS PER THE EXISTING GLASS;GLASS THICKNESS: 5 MM, FROSTED GLASS FILM: 120 - 140 MICRONS |
| 35 | ENAMEL PAINT FOR MS FRAME: PROVIDING AND APPLYING 2 COATS OF ENAMEL PAINT FOR STEEL FRAMES OF WINDOWS |
| 36 | INTERNAL WALL PAINTING: PROVIDING & APPLYING 2 COATS OF INTERIOR EMULSION PAINT: MAKE: ASIAN ROYAL EMULSION: NOTE: PAINT COLOUR WILL BE DECIDED BY C-DOT |
| 37 | HAND WASH BASIN AT CANTEEN: SUPPLY AND FIXING OF WASH BASIN ON OVER 25 MM THICK AND 2" WIDTH GRANITE SLAB WITH FULL ROUND NOSING AT ONE EDGE OVER THE MASONRY WALL AND WITH COMPLETE CEMENT WORKS ALONG WITH NECESSARY ACCESSORIES LIKE PILLAR COCK, TAPS WASTE WATER PIPES. ALSO GRATING WITH HOLE TO BE DONE FOR THE WASH BASIN IN BESIDE DINING AREA.MAKE: JAGUAR / CERA / HINDWARE OR ANY EQUIVALENT BRANDS / MAKES |
| 38 | TOTAL |
| 39 | GST |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
