Delhi Development Authority-DDA has published Tender For Maintenance Of Completed Scheme Finishing And Furnishing I/C Toilet Cleaning Etc. Complete At Vikas Sadan.. Submission Date for this Tender is 23-04-2024. Toilet Bathroom Tenders in vikas Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer al complete. |
| 2 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (a) Hot finished welded type tubes |
| 3 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of make Diamond, Armstrong, Saint Gobin or equivalent of approved texture, design and patterns having moisture content less than 2%, humidity (galvanized @ 120 gram per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 gram per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. a)With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles. |
| 4 | Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Granite stone slab of all colour and texture except black, Cherry/Ruby red. (a) Area of slab over 0.50 sqm(Note :- Granite stone work is to be executed in patches, therefore the color of grenite will be decided as per existing nearby color of granite. |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : a)Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | 12 mm cement plaster of mix : a)1:6 (1 cement: 6 fine sand) |
| 7 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. a) Size of tile 300 X 450 mm. |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. a)Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 10 | French spirit polishing : a)One or more coats on old work |
| 11 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. A)Two coats |
| 12 | Providing and laying Double charge vitrified tile polished finish in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). A) Size of Tile 800x800 mm |
| 13 | Casement door single panel with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides. UPVC Door a)Using R4 series with frame (64 mm & above) x (55mm & above) & sash (64 mm & above) x(100mm & above). |
| 14 | Two track two panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system, adjustable nylon rollers with SS 304 body. A)Using R4 series with frame (64mm & above) x (45mm & above) & sash (44mm & above) x (85mm & above). |
| 15 | Providing and fixing factory made uPVCglazed/wire mesh Partition / windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at al comers, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, al complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with /without high performance coatings as per design requirements and conforming to 1S: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (i) Sites with structure height more than 20m for al wind speeds a) Fixed frame for partition Using R4 series (64 mm & above ) x (50 mm & above) |
| 16 | Providing and fixing factory made uPVCglazed/wire mesh Partition / windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at al comers, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, al complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with /without high performance coatings as per design requirements and conforming to 1S: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (i) Sites with structure height more than 20m for al wind speeds a) Mullion / Sash for partition Using R4 seriesmullion (64 mm & above) x (70 mm & above) |
| 17 | Providing and fixing glazing in aluminium/ UPVC door, window, ventilator shutters and partitions etc. complete as per the architectural drawings and the directions of engineer-in-charge. a) With clear toughened glass panes of 8 mm thickness |
| 18 | Providing and fixing 10 X 10 mm TDP Square Edge Aluminium Tile Beading / Trim For Tile Corner Edge Protection,in all shapes and colors, all complete as per the architectural drawings and the directions of Engineer-In-Charge. |
| 19 | Providing and fixing glazing in aluminium / upvc door, window, ventilator shutters and partitionscomplete as per the architectural drawings and the directions of engineer-in-charge. A)With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 20 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including allCPVC plain & brass threaded fittings, i/c fixing the pipe with clampsat 1.00 m spacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and the cost of cutting chases and makinggood the same including testing of joints complete as per directionof Engineer in Charge. Concealed work, including cutting chases and making good the walls a)20 mm nominal dia Pipes |
| 21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe withclamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. a)20 mm nominal dia Pipes |
| 22 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe withclamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. a)32 mm nominal dia Pipes |
| 23 | Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous / pavers block surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. a) New work (Two or more coats). |
| 24 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a)1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 25 | Providing and fixing Polymer PVC fluted wall panels having sheet thickness 1.2 mm(Minimum overall thickness of fluted pannel is 12 mm )in all shapes and colors of make PARE, VOX, or equivalent all complete i/c neccessary accessories, profile etcas per direction and satisfaction of Engineer- in-Charge. |
| 26 | Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, , and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). a) 12mm thick commercial ply conforming to IS : 1328 BWR type |
| 27 | Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, , and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). a) a)12.5 mm thick tapered edge gypsum moisture board |
| 28 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 29 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. A)With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 30 | Providing and fixing washable wallpaper of make Marshalls, D"Decor, Jaypore, Nilaya by Asian Paints, Excel Wallpapers, Home Decor and Wallskin or equivalent in different shape and colors of the approved brand all complete as per direction and satisfaction of Engineer in charge. |
| 31 | Providing and fixing 8 mm thick Fluted MDF board with necessary screws/nuts & bolts/ nails, , and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge |
| 32 | French spirit polishing : a)Two or more coats on new works including a coat of wood filler |
| 33 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality a)Circular shape 560 mm internal diameter |
| 34 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality a)Square shape 450 mm internal dimension |
| 35 | Providing and fixing Wonderfloor or equivalent vinyl flooring , BRAAVO or equivalent series 4.5mm thick densely compacted cushioned sports flooring in roll form and skirting in pattern in width of 2.0mtr and 15mtr length ,solid ,resilient ,fully flexible, with PUR guard and protective wear layer of 500 microns , in approved shade , Installation and considering the wastage after cutting the rolls to fit the floor size and also providing thermal welding for a seamless floor providing uniformity and on a smooth and moisture free levelled floor surface using rubber based adhesive Fevicol SR 505 manufactured by Fevicol , all complete and as per the instruction of the engineer in charge . |
| 36 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (A) One or more coats on old work NOTE 1.Water charges @ 1 % will be deducted from the bill paid to the agency as water will be supplied by the department only. 2.The work is to be executed upto 7th floor of, Vikas Sadan. As there is no service lift working in B block, Vikas Sadan, hence all the arrangement for lifting of material to execute the work to be done by agency itself and nothing shall be paid extra on this account. 3.All the malba generated after dismantling/construction at the time of execution of work to be disposed off on per day basis at earmarked location as per the direction of the Engineer-in- Charge i.e. Ground floor, D block at his own expense & nothing shall be paid extra on this account by the Department so that The functioning of the office of Vikas Sadan will not interrupt. Being a headquarter of DDA, if the agency fails to disposed offmalba per day then penalty of Rs. 1000/- per day will be imposed, to maintain proper working of Offices of Vikas Sadan. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
