Paschimanchal Vidyut Vitran Nigam Limited has published Tender For Increasing Capacity Of Distribution Transformer And Installation Of Additional Transformer In Business Plan Under Edd-Iv, Syana.. Submission Date for this Tender is 24-04-2024. Distribution Transformer Tenders in bulandshahr Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Carriage of fallowings from ESC BSR to pit site on kachcha pacaa road including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 Km. approx. |
2 | STP Pole 13 Mtr Long |
3 | PCC Pole 11 Mtr Long |
4 | Pcc Pole 8.5 Mtr Long |
5 | Carriage of ACSR Weasal/Dog Conductor, AB Cable, LT XLPE Cable, G.I. Wire, 11 KV XLPE Cable, 33 KV Disc Insulator with fitting & 11 KV Disc insulator with fitting, 33 Pin Insulator with pin & 11 KV pin insulator with pin, 33 KV V-Type X-arm & 11 KV V-Type Cross Arm, M.S. Channel-Angle, Earthing Rod, Stay Set Complete & Etc as per RESPO Norms. |
6 | 25 KVA Transformer |
7 | 63 KVA Transformer |
8 | 100 KVA Transformer |
9 | 250 KVA Transformer |
10 | 10 KVA Single Phase TF |
11 | The following meterial Erection & Fixing as per RESPO manual. It including the cost of labour, T&P, Carrier etc. required for proper completion of work. |
12 | Single support on PCC pole 8.5 Mtr. Long with all accessories. |
13 | Single support on STP Pole 13/PCC 11 Mtr Long with all accessories |
14 | Making of D/P for T/F on PCC pole 8.5 Mtr. Long. |
15 | Grouting concreting & Plinthing of STP/Pcc Pole as per RESPO norms. |
16 | Fixing erection & grouting of Stay set complete with binding & Nozzling of Stay wire. |
17 | Earthing of supports with the help of Earthing rod & GI wire/Earth wire. |
18 | Laying stringing & sagging of Dog conductor in 3 phase |
19 | Laying stringing & sagging of Rabbit conductor in 3 phase |
20 | Laying stringing & sagging of Weasal conductor in 3 phase |
21 | Laying stringing & sagging of 11 KV 3x120 sq mm XLPE Cable |
22 | Laying stringing & sagging of LT XLPE Cable 3.5x240 sq mm |
23 | Laying stringing & sagging of AB Cable (3X50 + 1X35+1X16) sq.mm |
24 | Laying stringing & sagging of AB Cable (3X95 + 1X70+1X16) sq.mm |
25 | Laying stringing & sagging of AB Cable (3X120+1X95+1X16) sq. mm |
26 | Installation of 25 KVA Transformer |
27 | Installation of 63 KVA Transformer |
28 | Installation of 100 KVA Transformer |
29 | Installation of 250 KVA Transformer |
30 | Installation of 10 KVA Single Phase TF |
31 | Making of Plinth of 250 KVA Transformer. |
32 | Earthing of 250 KVA T/F water level |
33 | Fencing of 250 KVA T/F |
34 | Laying stringing & sagging of G.I. Wire 3.15 mm 10 SWG |
35 | Laying stringing & sagging of G.I. Wire 4 mm 6 SWG |
36 | Fixing of Gurding M.S. Angle 65x65x6mm)/1.6 meter |
37 | Installation of Distribution Box |
38 | Providing & Fixing of the following material by the Contractor as per UPPCL/RESPO Rules. |
39 | Gurding M.S. Angle 65x65x6mm)/1.6 meter |
40 | Distribution Box |
41 | MS Channel (Dropper) 100x50x2028 |
42 | MS Angle 75x75x6x2028 mm |
43 | M.S. Top Channel (125x65x2240 mm) |
44 | MS T-off Channel 125x65x1300 mm |
45 | F-Clamp |
46 | 11 KV Cross Arm Holding Clamp |
47 | 33 KV Cross arm Holding clamp |
48 | Danger Board with Clamp |
49 | Grouting of Pole |
50 | Stone Pad |
51 | Clamps for D.B. (40x6 mm) |
52 | Clamps for 10 KVA T/F (75x8 mm) |
53 | Clamp for D/P with Nut & Bolt |
54 | DEAD END CLAMPS WITH I-HOOK (INSULATED) |
55 | LT PIERCING CONNECTOR |
56 | SUSPENSION CLAMPS WITH I-HOOK (INSULATED) |
57 | Clamp for Gurding MS Angle |
58 | Earthing Rod |
59 | The fallowings matarial dismantalling & Carriage from site to ESC BSR including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 Km. approx. |
60 | ACSR Weasal/Rabbit Conductor (Scrap) - |
61 | G.I. Wire (Scrap) - |
62 | XLPE/AB Cable (Scarap / Old And Damaged) |
63 | ST POLE 11 MTR LONG (Iron scrap) |
64 | 1. Nut, Bolt, Clamps and others necessary items should be provided by contractor. 2. T and P should be and other necessary machinery should be provided by contractor. All work will be done as per UPPCL/RESPO Rules. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail