Military Engineer Services-MES has published Tender For Repair Maintenance Of Eot Hot Cranes And Connected Works At Zone A B And D At Lalgarh Jattan Mil Stn. Submission Date for this Tender is 14-05-2024. Mechanical engineering Service Tenders in Ganganagar Rajasthan. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 07-May-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-05-2024 |
FileName | File Description | File Size |
2502cef8-a1f5-43b1-bb2f-3514f8ca7b85.html | Tender Notice | 0 KB |
BOQ_727932.xls | Tender Document | 0 KB |
Tenderdocus.pdf | Tender Document | 0 KB |
Tendernotice_1.pdf | Tender Document | 0 KB |
Sl. No. | Item Description |
1 | Labour only for locating the fault in EOT cranes, any capacity, make and type including rectification of minor defects such as tightening of nut & bolts, checking and rectifying loose connection of control panels.accessories and current collectors replacing of fuse wire etc to keep the cranes functional complete all as specified and directed by Engr- In - Charge. NOTE:- (a)Stores shall be paid extra under respective items. (b)All T&P including ladders etc shall be contractor responsibility and rates are deemed to be included in quoted rate. (c)Stores of Minor nature viz, tape, thimble, screws, nuts, bolts and cable for making connection etc shall be arranged by the contractor. |
2 | S&F in replacement of brake lining with rivits for 10 Ton EOT crane complete all as specified and directed by Engr- In - Charge |
3 | All as per Ser item No 2.00 above but 5 tonne EOT crane |
4 | All as per Ser item No 2.00 above but 2 tonne EOT crane. |
5 | All as per Ser item No 2.00 above but 1.5 tonne EOT crane. |
6 | Supply and topping of gear oil (for LT, CT hoist and creep gear box) complete all as specified and directed by Engr- In - Charge |
7 | S&F in replacement of rope guide for 5 tonne EOT crane complete all as specified and directed by Enggr- In - Charge |
8 | S&F in replacement of rope guide for 2 tonne EOT crane complete all as specified and directed by Enggr- In - Charge |
9 | M&L in replacement of Air brake contactor size 1, 16 Amps rated 415/116/24 volts crane complete all as specified and directed by Engr- In - Charge. |
10 | All as per Ser Item No 9.00 abovebut size 1.5, 22 Amps, 415 / 110 / 24 Volts. |
11 | All as per Ser Item No 9.00 abovebut size 2, 32 Amps, 415 / 110 / 24 Volts. |
12 | All as per Ser Item No 9.00 abovebut size 3, 40 Amps, 415 / 110 / 24 Volts. |
13 | S&F in replacement of cable carrier for 5 tonne EOT crane complete all as specified and directed by Engr- In - Charge |
14 | S&F in replacement of cable carrier for 1.5 tonne EOT crane complete all as specified and directed by Engr- In - Charge. |
15 | S&F in replacement of HRC fuse 10 to 32 Amps ratingcomplete all as specified and as directed by Engr -in-charge. |
16 | All as per Item Ser item No 15.00 above but 63 Amp rating. |
17 | M&L in replacement of fuse base carrier 16 to 32 Ampscomplete all as specified and directed by Enggr- In - Charge. |
18 | All as per Ser Item No 17.00 above but 63 Amp rating. |
19 | S&F in replacement of brake disc washer for EOT crane upto 5 tonnecomplete all as specified and directed by Engr- In - Charge. |
20 | S&F in replacement of upper and lower hook fitting of5 tonneEOT crane complete all as specified and directed by Engr- In - Charge. |
21 | S&F in replacement of element of existing push button stationcomplete all as specified and directed by Engr- In - Charge. |
22 | M&L in replacement of push button of existing push button stationcomplete all as specified and directed by Engr- In - Charge. |
23 | M&L in replacement of PVC insulated copper cable of size 2.5 Sqmm, 4 corecomplete all as specified and directed by Enggr- In - Charge. |
24 | S&F in replacement of rubber buffer for 5.0 tonne EOT cranescomplete all as specified and directed by Enggr- In - Charge. |
25 | S&F in replacement of rubber buffer for 1.5 tonne EOT cranescomplete all as specified and directed by Enggr- In - Charge. |
26 | M&L in replacement of LT / CT wheel with bearing upto 1.5 tonneEOT cranes complete all as specified and directed by Enggr- In - Charge. |
27 | M&L in replacement of LT / CT wheel with bearing for 1.5 tonne EOT cranes complete all as specified and directed by Enggr- In - Charge. |
28 | S&F in replacement of spur gear for gear box of LT motion upto 5.0 tonne EOT cranes complete all as specified and directed by Enggr- In - Charge. |
29 | All as per Ser Item No 28.00 above but for CT motion. |
30 | All as per Ser Item No 28.00 above but hoist / creep motion. |
31 | M&L in replacement of oil seal of gear for CT / LT / Hoist / Creep gear box upto 5.0 tonne cranes complete all as specified and directed by Engr- In - Charge. |
32 | M&L in replacement of taper roller bearing of gear box of CT / LT / Hoist / Creep gear box upto 5.0 tonne cranes complete all as specified and directed by Engr- In - Charge. |
33 | M&L for replacement of wiring in control panel as per motor rating with PVC copper conductor cable in PVC channel and testing up to 10 tonne EOT cranes, complete all as specified and directed by Enggr- In - Charge. |
34 | M&L for replacement of wiring in control panel as per motor rating with PVC copper conductor cable in PVC channel and testing up to 5 tonne EOT cranes, complete all as specified and directed by Enggr- In - Charge. |
35 | M&L for replacement of wiring in control panel as per motor rating with PVC copper conductor cable in PVC channel and testing up to 2 tonne EOT cranes, complete all as specified and directed by Enggr- In - Charge. |
36 | M&L for re-winding of electric motor 5 HP, 415 Volts, 3 phase with enameled copper conductor as per existing size varnishing drying etc, complete all as specified and directed by Enggr- In - Charge. Note: After dismantling of UNSV motor the contractor will load in his own vehicle for repair at civil area and after repair thesame will be fixed in existing place with proper connection. |
37 | All as per Ser Item No 36.00 above but7.5 HP, 415 volts, three phase. |
38 | All as per Ser Item No 36.00 above but 10 HPcapacity three phase. |
39 | M&L in replacement of shaft pedestal for LT shaft as per existing size complete all as specified and directed by Enggr- In - Charge. |
40 | M&L in replacement of double ball bearing self aligned as per existing size complete all as specified and directed by Enggr- In - Charge |
41 | M&L forspray painting EOT crane by applying two coats of golden yellow / Tractor orange / any other synthetic enamel 1st quality paint after scrapping of old paint with blow lamp / manually sand paper for capacity of 1.5 tonne to 5 tonne cranes complete all as specified and directed by Enggr- In - Charge. |
42 | S&F in replacement of steel wire rope 10 mm suitable for 1 to 5 tonne EOT cranecomplete all as specified and directed by Engr- In - Charge. |
43 | S&F in replacement of electro magnetic brake coil for hoist motion of upto 10 tonne EOT cranescomplete all as specified and directed by Engr- In - Charge. |
44 | Comprehensive repair/maintenance of EOT crane 22 Nos includuing carrying out Monthly check and servicing of fully automatic flame proof electrical crane upto 10 ton capacity with simplex collective control system, with repair and maintenance of unserviceable damaged parts,such as bushes,all types of guide shoes, hangers, and its contact control cards control connector/links, limit switches, push buttons and its spares, and maintenance of of wire rope, necessary wiring and cable as per requirement for safe operations of crane repair/maintenance of control panel, cleaning of SWRetc to ensure safety and smooth functioning of all as specified and directed by Engr-in-Charge for following:- (a) Greasing / oiling of required parts i.e. shaft coupling, rope drum etc. (b) Checking & testing / adjustment of brakets for all motion. (c) Checking & tighting of coupling bolts motor foundatin bolts etc. (d) Checking the wiring connections in control panel & other accessories. (e) Checking of gear oil in gear box - For info please (Filling & topping gear oil shall be paid under respective item of BoQ) Note:- (i) Cost of minor spare parts/ routine material required for above mentioned maintenance is deemed to be included in the quoted rate. No additional cost of spares is admissible for the above maintenance.Decision of the Accepting Officer shall be final & binding regarding minor spares / routine material. (ii) Two Nos. experienced mechanic / technician shall be available to attend breakdown and ensure the safe, smooth, trouble free functioning of the crane. |
45 | M&L in replacement of electro magnetic brake complete set inclduing dismantling old unserviceable brake and removal from site complete all as specified and directed by Engr- In - Charge. |
46 | M&L in replacement of flame proof push button controlling unit comprising of "On" & "Off" operation to and for motion "Up" & "Down", long travel, & micro speed and emergency control of EOT crane including removal from site complete all as specified and directed by Engr- In - Charge. |
47 | M&L in replacement of PVC insulated electric wire copper conductor multi core having 12 pairs of size 1.5 Sqmm including removal form site complete all as specified and directed by Enggr- In - Charge. |
48 | M&L in replacement of control transformers of 415 volts / 110 Volts 500 VA incuding removal from site complete all as specified and directed by Enggr- In - Charge. |
49 | M&L in replacement of VVF drive suitable for 5.5 KW for hoist motion only by replacing the old U/S drive including removal from site complete all as specified and directed by Engr- In - Charge. |
50 | M&L in replacement of VVF drive suitable for 2.5 KW for hoist motion only by replacing the old U/S drive including removal from site complete all as specified and directed by Engr- In - Charge. |
51 | M&L in replacement of VVF drive suitable for 1.5 KW for hoist motion only by replacing the old U/S drive including removal from site complete all as specified and directed by Engr- In - Charge. |
52 | M&L in replacement of electro hydraulic thruster unit 18 Kg capacity complete all as specified and directed by Enggr- In - Charge, Make: Megtech |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail