Military Engineer Services-MES has published Tender For Repairs Maintenance Of Compound Wall, Chain Link Fencings, Gates, Foot Paths, Hard Standing. Ranges Etc And Other Connected External Works At Area No 1 And Area No 4 Under Ge Belgaum. Submission Date for this Tender is 06-05-2024. Footpath Work Tenders in belgaum Karnataka. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 8d14ed79-338c-4258-a9d4-5968fea876cb.html | Tender Notice | 0 KB |
| 8527Scheduleofcredit.pdf | Tender Document | 0 KB |
| 8527TenderDocuments.pdf | Tender Document | 0 KB |
| BOQ_727938.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Surface dressing n exc15 cm deep and getting out in Soft/loose soilcomplete all as specified and as directed. |
| 2 | Material and labour for Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering,ramming/rolling and finishing to required size, shape, etc., n exc. 1.5m high from base, etc complete all as specified and as directed |
| 3 | Material and labour forForming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering,ramming/rolling and finishing to required size, shape, etc., exc. 1.5m but n exc 3.00m high from base, etc complete all as specified and as directed |
| 4 | Material and labour forForming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering,ramming/rolling and finishing to required size, shape, etc., exc. 1.5m but n exc 4.50m high from base, etc complete all as specified and as directed |
| 5 | Material and labour for broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding15 cm thick, watered and rammed to a true surface, etc complete all as specified and as directed. |
| 6 | Material and labour forPlain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate in foundation filling and mass concrete,levelling courses andsub base etcincluding demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground leveland making good the disturbed surfacesto match with the adjoining surface and removal of rubbish off the premises and serviceable items taken as credit .complete all as specified and as directed. |
| 7 | Material and labour forPlain cement concrete 1:3:6type C2, using 40mm graded stone aggregate in foundation filling and mass concrete,levelling courses andsub base etcincluding demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground leveland making good the disturbed surfacesto match with the adjoining surface and removal of rubbish off the premises and serviceable items taken as credit .complete all as specified and as directed. |
| 8 | Material and labour forPlain cement concrete 1:2:4type B2, using 40mm graded stone aggregate in foundation filling and mass concrete,levelling courses andsub base etcincluding demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground leveland making good the disturbed surfacesto match with the adjoining surface and removal of rubbish off the premises and serviceable items taken as credit .complete all as specified and as directed. |
| 9 | Material and labour for Demolition of cement concrete(un reinforced) in ground floors and pavings n exc 15cm thick unreinforced ,above or below ground level and removal of debris off the premises complete all as specified and as directed |
| 10 | Material and labour for Providing Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub-base of floor, 100mm thickincluding necessary steel form work complete all as specified and as directed. |
| 11 | Material and labour for Providing Plain cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in sub-base of floor, 50mm thickincluding necessary steel form work complete all as specified and as directed. |
| 12 | Material and labour forForming 12mm thick expansion joints filled with pre-formed bituminuous filler and top 30mm primed and sealed with ceiling compoundgrade "A" for 100mm thick concrete floor etc complete all as specifed and as directed.Note :Make :STP LTD |
| 13 | Material and labour for Precast reinforced cement concrete1:2:4 (type B1) using 20 mm graded stone aggregate as in cover slab and set in cement morter (1:6), including demolition of reinforced cement concrete of any description and in any position and reinforcement cut as required to facilitate demolition including removal of rubbish off the premises and steel scrap taken as credit completeall as specified and as directed. |
| 14 | Material and labour for Pre-cast cement concrete solid block masonry, exc 10cm width, blocks cast in PCC 1:3:6 type C1, using 20mm graded stone aggregate, set in CM 1:6, including demolition of PCC solid block masonry built in cement mortar pillars, etc.in any position below or above ground level etc and removal of debris off the premises complete all as specified and as directed. |
| 15 | Material and labourfor Extra for forming fair finished drain or channel of 30cm inner girth in cement concrete using extra cement including forms moulds mitred / stopped end etc complete all as specified and as directed. |
| 16 | Material and labourfor Extra for forming fair finished drain or channel of 45cm inner girth in cement concrete using extra cement including forms moulds mitred / stopped end etc complete all as specified and as directed. |
| 17 | Material and labourfor Extra for forming fair finished drain or channel of 60 cm inner girth in cement concrete using extra cement including forms moulds mitred / stopped end etc complete all as specified and as directed. |
| 18 | Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45 mm thick(TFT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws completeall as specifiedand as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron+)/LLOYD |
| 19 | Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45 mm thick(TFT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscompleteall as specifiedand as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron+)/LLOYD |
| 20 | Dismantling mild steel work of any description and in any positionand taken as credit complete all as specified and as directed |
| 21 | Supply and fix Rolled mild stelroof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410 -W (Gde E- 250) quality A,etc complete all as specified and as directed |
| 22 | Supply and fix Rolled Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete etc, complete all as specified and as directed. |
| 23 | Supply and fix Mild steel flat iron 40 x 5mm for seceuring wire mesh etc including necessary drilling holes etc conforming to Fe-290(Gde E-165) etc, complete all as specified and as directed. |
| 24 | Supply and fix Rolled mild steel angle, Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe-290 Gde E-165 etc, complete all as specified and as directed. |
| 25 | Supply and fix Mild steel screw bolts(Machine made) with hexagonal or square head at one end and screwed the other end n exc 5 cm long and diametre of neck exc 5 mm but n exc 10 mm dia etc, complete all as specified and as directed. |
| 26 | Supply and fix Mild steel framed work (Ornamental and inctricate design) such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings;frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 etc,complete all as specified and as directed. |
| 27 | Restraining & resecuring including making good staple for steel barbed wire with 2 mm dia , including securing or tying at crossings, mild steel wire etc complete all as specified and as directed. |
| 28 | Supply and fixin repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed. Note :Make of GI Barbed wire : SAIL/TATA/RINL |
| 29 | Supply and fix in repair 600mm dia concertina coil fencing conforming to IS 4454 Part-I, made out of 2.6mm(+ or - 2%) dia of steel core wire galvanised and with anti rust coating (Black colour), with coils not less than 51 turns for an effective stretched length of 6m with 2 handles, duly placed on existing supports over security/ compound walls and tied with 2mm dia binding wire and the spikes at the ends of coils embedded into PCC coping complete all as specified and as directed. Note: PCC coping shall be measured and paid separately. |
| 30 | Dismantling fencing wire mesh, any type complete all as specified andas directed. |
| 31 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire etc, complete all as specified and directed. |
| 32 | Supply only chain link fencing MS galvanised any size or type etc, complete all as specified and as directed. |
| 33 | Supply and fix Mild steel TMT round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipsincluding dismantling wrought iron or mild steel work of any description and taken as credit complete all as specified and as directed . |
| 34 | Material and labour for 15mm thick Rendering on fair faces of brick work or concrete surfaces andsurface finished even and fair without using extra cement in CM 1:4 etc, complete all as specified and as directed. |
| 35 | Material and labourfor Rendering 10mm thick on fair faces of brick work surfaces in cement mortar (1:4) for receiving wall tiles complete all as specified and as directed |
| 36 | Material and labour for Preparing newly plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistent primer etc, complete all as specified and as directed. |
| 37 | Material and labourfor Preparation of new surfaces of steel of any description over 10cm width or girth and applying two coats of synthetic enamel paint ove a coat of zinc chrome red oxide primer complete all as specified and as directed. |
| 38 | Material and labour for Complete removal of existing treatment on wall with wire brush ,scrapping down smoke soot ,mould , moss and efflorescent salts ,trading oil and greasy spots ,filling holes ,cracks with cement base puttyand applying two coats ofcement based paint complete allas specified and asdirected. |
| 39 | Material and labour for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc, including dismantling stone sett paving of any description or thickness, removing, rubbish off the premises complete all as specified and as directed. |
| 40 | Material and labour forRubber moulded chequered cement concrete tile of size 30cm x 30cm x 25mm thick with grey cement andpigments, set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bedin cement mortar 1:6 as inpathways, etc. including dismantling stone sett paving of any description or thickness anmd removing, rubbish off the premises complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
