}

Tender For Construction Of Cc Road And Drain In Attach Of Dhanop Mata Tempe Streetof Ward No 73 , Kota, kota-Rajasthan

Urban Improvement Trust-UIT has published Tender For Construction Of Cc Road And Drain In Attach Of Dhanop Mata Tempe Streetof Ward No 73 , Kota. Submission Date for this Tender is 06-05-2024. Road Work Tenders in kota Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

43176670
Corrigendum : Tender For Construction Of Cc Road And Drain In Attach Of Dhanop Mata Tempe Streetof Ward No 73 , Kota
Open Tender
Indian
Rajasthan
kota
06-05-2024

Tender Documents

Additional Details Available on Click
✓ Tendering Authority
✓ Publication Document
(Tender Document / Tender Notice )

Tender Details

Tender For Construction Of Cc Road And Drain In Attach Of Dhanop Mata Tempe Streetof Ward No 73 , Kota

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 25-Apr-2024 Corrigendum3 Date 06-05-2024

Key Value

Document Fees
INR 1500 /-
EMD
INR 29000.0 /-
Tender Value
INR 14.50 Lakhs /-

Attachment

FileName File Description File Size
7f4baf95-29f2-499d-9382-167dd4b3f31a.html Tender Notice 0 KB
BOQ_688368.xls Tender Document 0 KB
corrigendum-2nit37.pdf Tender Document 0 KB
Corrigendum37.pdf Tender Document 0 KB
Special_Condition_19.pdf Tender Document 0 KB
Tendernotice_1.pdf Tender Document 0 KB

BOQ Items

Name of Work: Construction of CC raod and drain in attach of Dhanop mata tempe streetof ward no 73 , Kota.
Sl. No. Item Description
1Providing and Laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to IS:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per MoRTH Specification : Clause No. 602, 112.
2Using Cement concrete M-25 pavement Grade
3Rough Chisel dressed Sandstone 35 mm thick flooring of approved shade setover 20mm thick base of cement mortar 1:6 (1 cement : 6 coarse sand) and pointingwith cement sand mortar 1:3 with pigment to match the shade of stone with joint thickness up to 15 mm complete in all respects :
4Red sand stone (Karauli stone)
5Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils
6Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.
7M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size).
8Centering and Shuttering with plywood or steel plate including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc.
9Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix
10Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ("Original producers" who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)
11Thermo-mechanically Treated bars (Conforming of relevent IS code)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail