Urban Improvement Trust-UIT has published Tender For Construction Of Entrance Gate On Ramjanki Mandir Road (Rangbari Road). Submission Date for this Tender is 06-05-2024. Gates Supply Tenders in kota Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Apr-2024 | Corrigendum3 | Date | 06-05-2024 |
| FileName | File Description | File Size |
| a0374768-8d1e-44fb-bb59-e7f78f8c3be4.html | Tender Notice | 0 KB |
| BOQ_688350.xls | Tender Document | 0 KB |
| corrigendum-2nit37.pdf | Tender Document | 0 KB |
| Corrigendum37.pdf | Tender Document | 0 KB |
| Special_Condition_8.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 2 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). |
| 3 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. |
| 4 | M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size). |
| 5 | P & F Stone cladding/Flooring works dressed bansi paharpur stone 25mm thick in traditional style used in cladding/Flooring with pattern over 25 to 50 mm thick base in CM 1:6 including pointing with cement mortar 1:2 (cement : 2 stone dust) matche the shade of stone with joint thickness upto 1.5mm as per direction of engineer-in-charge. |
| 6 | P/F Ornamental pink Bansi Paharpur stone chhatri (Total height = 0.60+1.50+0.10+0.05+0.10+0.10+0.05+0.75+0.30) and 1.20 m x 1.20 m size with following specification with carving work (All measurement are in metres) cladding- 4 x 1.00 x 0.525 x 0.04 thick, cladding pillars - 4 x 0.10 x 0.10 x 0.52 , Galta - 4 x 0.15 x 0.075 size, Dhasa - 4x0.30x0.075 size main pillars - 4x0.15x0.15x1.50, Aech - 4x0.525 height and 0.05 thick , barsoth- 4x0.15x0.10 size chajj - 4x0.05 thick with 0.25 projection dabstone - 1.20x1.20x0.10 step cladding above dabstone - 4x0.04 thick x 0.10 height (with cc 1:2:4, 1.00x1.00x0.10), Gola stone- 1.20x1.20x0.05, Gumbad - 1x.75 dia. x 0.60 height, kalash- 1x0.30 height and.125 dia at base complete as per approved design and direction of engineer in charge |
| 7 | "Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix " |
| 8 | Centering & shuttering with plywood or steel Plate including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor Three level for : |
| 9 | Columns, pillars, posts and struts etc. |
| 10 | Centering and Shuttering with plywood or steel plate including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. |
| 11 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ("Original producers" who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) |
| 12 | Thermo-mechanically Treated bars (Conforming of relevent IS code) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
