Military Engineer Services-MES has published Tender For Additional/Alternator To Building No P-111/A Cook Houses (A And D) And Mw At Mil Stn Sri Ganganagar. Submission Date for this Tender is 13-05-2024. Civil Work Tenders in ganganagar Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-Apr-2024 | Amd in Tender Documents and BOQ | BOQ | 06-05-2024 |
| 2 | 06-May-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-05-2024 |
| Sl. No. | Item Description |
| 1 | Dismatiling brick tiles or terracing tiles, single layer on roofs and complete all as specified and directed by Engineer - in -Charge. |
| 2 | Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed by Engineer - in -Charge. |
| 3 | S&F heat resistance tiles ofsize 300x300x10mm thick on roof slab of any colour approved over and laid including 15mm thick in CM 1:4.Techinical specification of roof tiles shall be as prer IS 4457:2007 complete all as specified and directed by Engineer - in -Charge. |
| 4 | M&L for Roof treatment to RCC roofas follows :- (a) Cleaning the roof surfaces thoroughly using wire brushes to remove sharp projections,cleaning joints, washing, drying and removing all dirt/dust to receive concrete padding/ plaster etc complete. (b) Providing 15 mm thick screed bed or bedding layer of cement mortar (1:4)with WPC , finished even and smooth without using extra cement.(c) Providing one coat of approved bituminous primer @ 100 gms per sqm, over dried plastered surface. (d) Laying 3 mm thick APP based polymeric membrane, (mineral finish) minimum weighing 3 Kg/Sqm reinforced withnon woven polyster fabric (weight not less than 150 gms/Sqm) by torch application. The overlapping while torching shall be 75 mm on longitudinal direction and 100 mm on the transverse direction complete all as specified and directed by Engineer-in-Charge.Makes:-STP, Dr Fixit, SIKKA, Torch Tar Notes: (i) All joints and change in directions should be covered with cement mortar (1:3) mixed with SBR latex @ 200 ml/bag of cement/ as per site requirement and cured well before laying membrane by torching.(ii) All angles and abuttments should be sealed well with extra care to ensure full bondage. (iii) Water proofing treatment shall be got carried out by approved authorised applicator of manufacturer only.The name of firm shall be got approved from GE before carrying out the work. (iv) The independent testing of membrane for technical parameters given in particular specificationsshall be carried out from Govt approved labs having fascilities for testing of membrane. (v) The guarantee of treatment shall be for minimum 10 yearsreckoned from date of completion of whole work |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed by Engineer - in -Charge. |
| 6 | M&L 300x600 x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid, over and including 10mm thick backing coat in CM 1:4. complete all as specified and directed by Engineer - in -Charge. |
| 7 | M&L Non- skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid, over and including 15mm thick screed in CM 1:6 complete all as specified and directed by Engineer - in -Charge. |
| 8 | M & Lmachine cut kota stone slab flooring 18-20mm thick(minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing laid, over and including 15mm thick of screed bed in CM 1:6.complete all as specified and directed by Engineer - in -Charge. |
| 9 | M & L machine cut kota stone slabs as in vertical surfces such as risers of steps 18-20mm thickover cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing also moulding edges laid, over andincluding 10mm thick of backing coat in CM 1:4,complete all as specified and directed by Engineer - in -Charge. |
| 10 | M&L granite (of any type) work18 to 20 mm thick(table rubbedand polished) in steps, jambs, pillars, window-cills, cooking platforms and laid over and including 12 mm thick cement mortar 1:4including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer - in -Charge. |
| 11 | Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engineer - in -Charge. |
| 12 | M&L providingreinfoced cement concrete (nominal mix) in cement concrete 1:2:4 Type B1(20mm graded stone aggregate)as chajjasetcand similar workcomplete all as specified and directed by Engineer-in-Charge.(Note : The rate quoted shall be deemed to include use and waste of necessary form work) |
| 13 | M&L MS TMT bar 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge. |
| 14 | M&L for Providing precast RCC Jallies ( cement concrete Type B0 1:2:4 12.5mm gragded stone aggregate) louvres and jallies,40 mm thick (measured solid), including allmouldings & set in CM 1:4 complete all as specified and directed by Engineer - in -Charge. |
| 15 | Demolition concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed by Engineer - in -Charge. |
| 16 | Surface dressing n exc 15 cm deep in soft/loose soilcomplete all as specified and directed by Engineer - in -Charge. |
| 17 | M&L for Hardcore of broken bricks gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer - in -Charge. |
| 18 | M&L75 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate)filling sub base as in floors, paving, sub floor etc finished even and fair complete all as specified and directed by Engineer - in -Charge. |
| 19 | M&L 25mm thick cement concrete flooring type B0, 1:2:4 using 12.5 mm graded stone aggregate finished even and fair complete all as specified and directed by Engineer - in -Charge. |
| 20 | M&L for sand filling (25mm thick) under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer - in -Charge. |
| 21 | M&L Machine pressed precastrubber moulded concretecoloured interlocking paver block any shape and size confirming to IS 15468-2006 of 60 mm thickness with grey cement and pigmentM-35 Grade 20mm graded stone aggregate) complete all as specified and directed by Engineer - in -Charge. |
| 22 | M&L providing precast cement concrete in PCC (1:2:4) type B-1 with 20 mm graded aggregate stone for kerb stone and similar works with plain fair finishes including chamfers, weatherings, throat- ing etc. and setting in mortar (1:4) complete with joints to match complete all as specified and directed by Engineer - in -Charge. |
| 23 | M & L for 75mm thick cement concrete type C-1, 1:3:6 using 20mm graded stone aggregate as in plinth protection finished even & smooth complete all as specified and directed by Engineer - in -Charge. |
| 24 | M & L for 40mm thick cement concrete type B-1, 1:2:4 using 20mm graged stone aggregate as in flooring , finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engineer - in -Charge. |
| 25 | Dismantling of brick work built in cement mortar of any description complete all as specified and directed by Engineer - in -Charge. |
| 26 | M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius built in CM 1:6complete all as specified and directed by Engineer - in -Charge. |
| 27 | M&L for brick work with sub class "B" bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks complete all as specified and directed by Engineer - in -Charge. |
| 28 | Taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer - in -Charge. |
| 29 | M&L rendering 15 mm thick in CM (1:6) finished even and smooth without using extra cement as on brick work surfaces complete all as specified and directed by Engineer - in -Charge. |
| 30 | M&L 15mm thick rendering in CM 1:4 to brick/concrete wall surfaces finishedeven & smooth w/o using extra cement complete all as specified and directed by Engineer - in -Charge. Note: Work is to be carried out upto 10 mtr height. |
| 31 | M&L 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer - in -Charge. |
| 32 | M&L for preparation ofnewly plastered surface of wall any description and applying twocoats of oil emulsion distemper laid, over & inlduding3 mm thick wall putty over a coat of chalk whiting layer on plastered surfaces preparatory to distempering complete all as specified and directed by Engineer - in -Charge. |
| 33 | M & L Preparation of new plastered surfaces of wall and applying two coats of cement base paint laid, over & inlduding 3 mm thick wall putty over one coat of alkali resistantprimer complete all as specified and directed by Engineer - in -Charge. |
| 34 | M & L for three coats of white washing on new plastered surfaces of on ceiling surface including preparation of surface complete all as specified and directed by Engineer - in -Charge. |
| 35 | M&L for preparation of old surface including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and removing all dirt and dust by watering making surface even and smooth and then applying two coats of cement base paint laid, over & inlduding3 mm thick wall putty well prepared old decorated plastered surface etc all as specified and directed by Engineer - in -Charge. |
| 36 | M & L for preparation of old decorated wall surfacesby brooming down or steel wire brushing,scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spotsand then applying two coats of oil bounddistemper laid, over & inlduding3 mm thick wall puttycomplete all as specified and directed by Engineer - in -Charge. |
| 37 | M & L forold decorated ceiling surfacesby brooming down or steel wire brushing,scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spotsandthen applyingtwo coats of white washcomplete all as specified and directed by Engineer - in -Charge. |
| 38 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified and directed by Engineer - in -Charge. |
| 39 | Taking down chowkats or frames (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed by Engineer - in -Charge. |
| 40 | Taking downwindow/ventilatorsof any type and material complete all as specified and directed by Engineer - in -Charge. |
| 41 | Taking down shutters of any description exc 1 Sqm but n exc 2 sqm each and refixing in same opening after resecuring easing duly completed repair work in all respects etc.complete all as specified and directed by Engineer - in -Charge. |
| 42 | Taking down shutters of any material and description n exc 1 Sqmeach and refixing in same opening after resecuring easing duly completed repair work in all respects etc.complete all as specified and directed by Engineer - in -Charge. |
| 43 | S&F factory made steel windows with side hung shutters includinghinges with steel handle and steel peg stay, complete with glazing bars, devetailed or welded complete all as specified and directed by Engineer - in -Charge. |
| 44 | S&F 10mm dia M. S round guard bars for steel windows complete all as specified and directed by Engineer - in -Charge. |
| 45 | S&F MS flat iron 25 x 6mm as in hold fast confirming to Fe 290 Gde E-165 complete all as specified and directed by Engineer in Charge |
| 46 | Cutting holes in brick (n.exc half brick)walls in cement mortar forinserting holdfasts andmaking gooddismantled portion incement mortar 1:3 or cement concrete 1:2:4Type B-1 complete all as specified and directed by Engineer - in -Charge. |
| 47 | S&F framed brackets of angles or tee with web and flange cut to shape, drilled and counter shunk for screw, including bending and welding angles asnecessary gusset plates riveting rails, braces,running rails and guides and hanging; also fastening and fixing complete conforming to Fe-290(Grade-165)all as specified and directed by Engineer-in-charge. |
| 48 | S & F factory made pressed steel frames of frame size 125 x 60mmfor doors with one or more rebatesincluding necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed by Engineer - in -Charge. Note : Thickness of MS sheet shall be 1.25mm. |
| 49 | S & F factory made pressed steel frames of frame size 105 x 60mmfor doors with one or more rebatesincluding necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed by Engineer - in -Charge. Thickness of MS sheet shall be 1.25mm. |
| 50 | M&L for providing cement concrete (1:3:6) type C1 using 20 mm gradded stone aggregate for filling in pressed steel frames and other similar items complete all as specified and directed by Engineer - in -Charge. |
| 51 | S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer - in -Charge. |
| 52 | S & F factory made 35mm thick shutter, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engineer - in -Charge. |
| 53 | S & F factory made Second class hard wood glazed and skeleton Door, window shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares with plain, chamfered or rounded mitred and rebated sash bars any number& fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, section 8 clause 8.24 (a) complete all as specified and directed by Engineer - in -Charge. |
| 54 | S&F 18/19mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work, including handles, sliding channels and wheels with magneting catcher/ locking arrangements and beading etccomplete all as specified and directed by Engineer-in-Charge. |
| 55 | S & F Continuous (piano) hinges, (width of flap 40mm when open)mild steel, bright finish or electrogalvanised complete all as specified and directed by Engineer-in-Charge. |
| 56 | S&F in repairs aluminium 150 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screwscomplete all as specified and directed by Engineer-in-Charge. |
| 57 | S&F factory madefiber glass reinforced plastic (FRP) Door frames of three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame molded with fire retardant grade un-saturated polyster resin and chopped mat. door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. the frame shall be covered with fiberglass from all sides. M S stay shall be provided at the bottom to steady the frame complete all as specified and directed by Engineer-in-Charge. |
| 58 | S&F factory made 30mm thick fiber glass reinforced plastic (FRP paneled DoorShitter ofrequired colour and approved brand and manufacture made with fire-retardant grade unsaturated polyster resin. Moulded to 3mm thick FRP laminate for forming places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels and conforming to IS 14856-2000 complete all as specified and directed by Engineer-in-Charge. |
| 59 | S&F 100 mmbutt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed by Engineer - in - Charge. |
| 60 | S&F 125 mmbutt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed by Engineer - in - Charge. |
| 61 | S&F 75 mmbutt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed by Engineer - in - Charge. |
| 62 | S&F 125 aluminium anodised barrel tower bolts of extruded sction and fixedcomplete all as specified and directed by Engineer - in - Charge. |
| 63 | S&F aluminium handle cast type anodised, 150mm long complete all as specified and directed by Engineer - in - Charge. |
| 64 | S&F 300mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engineer - in - Charge. |
| 65 | S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed by Engineer - in - Charge. |
| 66 | S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer - in - Charge. |
| 67 | S&F in repairs 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer - in - Charge. |
| 68 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge. |
| 69 | S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge. |
| 70 | S & F for floor door stopper of aluminium alloy body and tongue, Overall length of cover plate 140mm anodised, with hard drawn steel spring, complete all as specified and directed by Engineer - in - Charge. |
| 71 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beads complete all as specified and directed by Engineer - in - Charge. |
| 72 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squaren. exc 0.5 sqm in each plane complete all as specified and directed by Engineer - in - Charge. |
| 73 | S&F 4mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in suqares n.exc 0.5 Sqm in each pane complete all as specified and directed by Engineer - in - Charge. |
| 74 | S&FAluminium frame for doors, window, ventilatorswith one or more rebates including joining cleat for fixing including sliding chennals etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-charge |
| 75 | S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,powder coated aluminum snap beading screws, sliding channel, wheels etc. complete all as specified and directed by Engineer-in-Charge. |
| 76 | S&Faluminiumwindowsand ventilator shutters, side hung typewithout sash bars, aluminium saction weighing 0.55 kg/M including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fitting such as aluminiumpeg stay 150mm long (1No),powder coated aluminiumhinges type B-21 100 mm long (2No),suitable powder coatedaluminium handle -(1No), sliding channel with wheelsand powder coated aluminium self closing tower bolt 75mm long (1No) complete all as specified and directed by Engineer - in - Charge. |
| 77 | S&F powder coated aluminium grills to aluminium windows including all necessary fixing arrangments of size 50 mm x 5 mm thick complete all as specified and as directed by Engineer - in - Charge.Note:- Design shall be approvedby Engineer - in - Charge. Note :- Minimum thickness of powder coating shall not be less than 50 micron. |
| 78 | S & F for 5.5mm thick sheet glass(tinted),selected quality and glazing with necessory arrangement in square exc 0.5 sq. m in each pane complete all as specified and directed by Engineer - in - Charge. |
| 79 | M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying onecoats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.. |
| 80 | M&L for preparation of new wooden and wood base surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and directed by Engineer-in-Charge. |
| 81 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 82 | M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed by Engineer-in-Charge. |
| 83 | S&F in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and 100mm bore CI P or S trap connection to trap and to flushing pipe front or back inlet including, trap complete all as specified and directed by Engineer-in-Charge. |
| 84 | S&F in repair vitreous China wash down water closet pan (pedestal pattern), white complete, including white seat cover with hinging arrangement, (excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed by Engineer-in-Charge. |
| 85 | S&F in repairs 10 ltr capacity low level PVC valveless, syphonic action type flushing cistern(dual system), white, with inlet, ball valve, flush pipe, PVC connection 15 mm dia and 450 mm long float and handle including bracket. complete all as specified and directed by Engineer-in-Charge. |
| 86 | S&F in repairsstainless steel CP toilet paper holder complete all as specified and directed by Engineer-in-Charge. |
| 87 | S&F in repairstainless steelCP soap dish complete all as specified and directed by Engineer-in-Charge. |
| 88 | S & F in repair 20 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge. |
| 89 | S & F in repairs 15 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge. |
| 90 | S&F in repairs chromium plated stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed by Engineer-in-Charge. |
| 91 | S&F in repair chromium plated Angle stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed by Engineer-in-Charge. |
| 92 | S&F in repair concealed chromium plated Angle stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed by Engineer-in-Charge. |
| 93 | S&Fin repairs chromium plated 15mm bore bib taps cast copper alloy, chromium platedfency type with crutch or butterfly handle screwed down screwed for Iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge. |
| 94 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specified and directed by Engineer-in-Charge. |
| 95 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 600 m long complete all as specified and directed by Engineer-in-Charge. |
| 96 | S&F CP gratings 100 mm dia of PTMTfixed in repairs.(Minimumweight25 gms ) complete all as specified and directed by Engineer-in-Charge. |
| 97 | Taking up or down GI steel water tubing 15mm bore and connections including fittings from floor/walls/ceiling complete all as specified and directed by Engineer-in-Charge. |
| 98 | Taking up or down GI Steel water tubing 20mm bore and connections including fittings from floor/walls/centrings complete all as specified and directed by Engineer-in-Charge. |
| 99 | S & F Galvanised steel water tubing 15 mm bore medium grade with all fittings concealed including cutting chases to brick wall/ceiling or laying in floors and making good complete all as specified and directed by Engineer-in-Charge. |
| 100 | Fixing only tubes,of 15mm bore any grade,(medium) to walls and ceilings or laying in floors complete all as specified and directed by Engineer-in-Charge. |
| 101 | S & F GI steel water tubing 20mm bore medium grade with all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge. |
| 102 | Fixing only tubes,of 20 mm bore any grade,(medium) to walls and ceilings or laying in floors complete all as specified and directed by Engineer-in-Charge. |
| 103 | Dismantling water tanks any typet n exc 250 ltr complete all as specified and directed by Engineer-in-Charge. |
| 104 | Dismantling water tanks any type exc. 250 ltr but nexc 500 ltr complete all as specified and directed by Engineer-in-Charge. |
| 105 | Dismantling water tanks any type exc. 500 ltr but nexc 1000 ltr complete all as specified and directed by Engineer-in-Charge. |
| 106 | S & F rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I (250 Ltrs) capacity. complete all as specified and directed by Engineer-in-Charge.Note : PVC Tank shall be ISI marked and having two layer. |
| 107 | S & F rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I (500 Ltrs) capacity. complete all as specified and directed by Engineer-in-Charge. Note : PVC Tank shall be ISI marked and having two layer. |
| 108 | S & F rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I (1000 Ltrs) capacity. complete all as specified and directed by Engineer-in-Charge. Note : PVC Tank shall be ISI marked and having two layer. |
| 109 | Supply and fixing ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for bore dia of pipe 20mm.complete all as specified and directed by Engineer-in-Charge. |
| 110 | Dismantling of cast iron or reinforced concrete drain pipes (100mm & 75mm bore) jointed in cement mortar and taking out of trenches, if required.complete all as specified and directed by Engineer-in-Charge. |
| 111 | S&F 100mm bore sand cast, cast iron soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or fixed to wall complete all as specified and directed by Engineer - in - Charge |
| 112 | S&F 75mm bore sand cast, cast iron soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or fixed to wall complete all as specified and directed by Engineer - in - Charge |
| 113 | S&Fcast iron 100mm bore cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge. |
| 114 | S&Fcast iron 75mm bore cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge. |
| 115 | S&F cast iron 100 mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engineer-in-Charge. |
| 116 | S&F cast iron 75 mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engineer-in-Charge. |
| 117 | S&Fcast iron100 mm bore Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engineer-in-Charge. |
| 118 | S&F cast iron 75 mm bore Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engineer-in-Charge. |
| 119 | S& F 100 mm bore cast iron Sockets (double) collars complete all as specified and directed by Engineer-in-Charge. |
| 120 | S& F 75 mm borecast iron Sockets (double) collars complete all as specified and directed by Engineer-in-Charge. |
| 121 | S&F 100 mm borecast iron Traps ‘P’ or ‘S’complete all as specified and directed by Engineer-in-Charge. |
| 122 | S&F100 mm bore Cast iron cowls complete all as specified and directed by Engineer-in-Charge. |
| 123 | Taking down eaves gutters and rainwater pipes,PVC (SWR) pipes ( any size or pattern ) including all fittings heads ,shoes, bends,complete all as specified and directed by Engineer-in-Charge. |
| 124 | S&F 110 mmborePVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls includingnecessary scaffolding upto the height of buildingfrom ground level complete all as specified and directed by Engineer-in-Charge. |
| 125 | S&F 110 mm bore PVC (SWR) bend with oval access door complete all as specified and directed by Engineer-in-Charge. |
| 126 | Supply and fixing drapery curtain rod 25mm dia, fancy type, fabricated out of stainless steel steel sheet not less than 20 guage, including brackets and pair of decorated end knobs (finials), stop roller etc, pretreated powder coated natural color completeall as specified & directed by Engineer-in- charge. |
| 127 | S&F in repairs aluminium Door closer hydrau lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engineer-in-Charge. |
| 128 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge. |
| 129 | S & F in repair stainless steel sink 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge. |
| 130 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer - in -Charge. |
| 131 | M & L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290(Grade-165) complete all as specified and directed by Engineer-in-Charge. |
| 132 | M & L Framed work as in doors or gates of angle or other section with gusset plates, for stainless steel framed work as in multipurpose vegitable rack, ration rack, utensils racks, plate rack ofGde -304 ordoors or gates of angle or other section with gusset plates, rails, braces, including SS wire guage arragements in sides etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete conforming complete all as specified and directed by Engineer - in -Charge. |
| 133 | Excavating post holes (or similar holes) each n.exc. 0.5 cum getting out returning filling, in and rammingwith earth around in layers not exc. 25 cm includingwatering and removing surplus soil to a distance n.exc. 50m and making good surface in soft loose soil complete all as specified and directedbyEndineer -in -Charge. |
| 134 | M&L PCC 1:3:6 (40mm graded stone aggregate) type C2,in foundation of posts and strutscomplete all as specified and directed by Engineer-in-Charge. |
| 135 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 136 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 137 | S&F 0.56 mm thickPlain, Aluminium sheeting, Alloy 31000 H4 for crumple/expansion joints, ridges, hips, valley gutter, drip,and straight flashing (length and girth as fixed)fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 138 | S & F for steel work in tubular trusses ,channels , including special shaped washer, platesnuts and bolts, gusset plates,including necessary drillingetc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed by Engineer-in-Charge. |
| 139 | S & F for Flat ironfor wind ties,plates (plain or chequered) channels, posts, square cut or notched (ordinary and counter sunk) forming holesetcFe 410 -W (Gde- E- 250) quality- A complete all as specified and directed by Engineer-in-Charge. |
| 140 | S&F mild steel screw bolts (machine made) with hexagonal or square head at one end, and screwed the other,or screwed bothend to be fitted with washer and one hexagonal/ square nut not exceeding 5cm long and dia of neck 11 to 15mm complete all as specified and directed by Engineer-in-Charge. |
| 141 | S&F for DWCPE (S N 8) drain pipe 150mm internal dia confirming to IS 16098 part II 2013 laid in trenches on moorum bed to required slope including all accessories/ fitting complete all as specified and directed by Engineer- in- Charge.Note: Moorum shall be paid separately. |
| 142 | Excavating over areas, not exc 1.5 mtr deep and getting out in soft / loose soil complete all as specified and directed by Engineer-in-Charge. |
| 143 | Excavation in trenches, n exc 1.5m wide and n exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and directed by Engineer-in-Charge. |
| 144 | Returning, filling in, including spreading, levelling , watering and well ramming in layers not exc 25 cm.in soft / loose soil complete all as specified and directed by Engineer-in-Charge. |
| 145 | Removing excavated material n exc. 50 mtr and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 146 | M & L for PCC (1:4:8) type D2 ( 40mm graded stone aggregate) as in foundation lean concrete complete all as specified and directedby Engineer-in-Charge. |
| 147 | M&L for PCC 1:3:6 type C-2 (40mm graded stone agg.) concrete in surface channels and drains complete all as specified and directed by Engineer-in-Charge. |
| 148 | M & L for flush pointing in CM 1:4, to bricks laid flat or brick edgein pavings and drain complete all as specified and directed by Engineer-in-Charge. |
| 149 | M&L for brickwork withsub class `B" Bricks, straight or curved on plan exc 6m meanradius, built in CM 1:4 in half brick thick wall / on edge wall complete all as specified and directed by Engineer-in-Charge. |
| 150 | S & F in repair for chromium plated shower rose125 mm size and 15 mm dia with or without swivel joints, any size including fixing to steel pipe or union fixed in repair complete all as specified and directed by Engineer-in-Charge. |
| 151 | S&F in repair for brass chromiiumplated tubular towel rail20mm dia,D type, 60 cmLong between flanges complete all as specified and directed by Engineer-in-Charge. |
| 152 | S&F 600mm x 450 mm bevelled edge mirror of selected quality 5mm thick glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cupwashers including fixing arrangements as per approved by Engr-in-charge. |
| 153 | Suuply and fix in repairs Corner vitreous china wash hand basin white flat back of size 550mm X 400mm, fixed with a set of cast iron brackets including cutting and pinning in ends of brackets to wall, provision of 15mm size pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter "Hot or cold"" with long scrwed shanks and fly nuts, 32mm dia brass chromium plated waste fittings 450mm long PVC connection of 15mm size with PTMT nuts and 40mm dia waste pipe complete all as specified and directed by Engineer-in-Charge. |
| 154 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed by Engineer - in -Charge. |
| 155 | M & Lfor concealed conduit point wiring complete for light/fan on independent /combine boardwith cable 1.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor,drawn in and includingPVC Concealed conduitpipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , aftercutting in wall chasing for conduits and sinking"s for sunkencast iron/ pressed steelterminal boxes suitable lengthandthickness for mounting, switches, sockets,fan regulatorwith 3 mm thick plastic laminated sheet cover fixedwith brass screwed and cup washers, dulygrouting and painted with red oxide metal primer and making the gooddisturbed surfaces of wallin CM 1:3 with white wash or existing colour including provision ofcontinuousearth continuity conductoralong with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switchand connected to commonearth dolly, complete all as specified anddirecedby the Engineer in charge. |
| 156 | All as per Srl item No. 155 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified by Engineer-in-Charge. |
| 157 | All as per Srl item No. 155 here in before but for one three pin socket outlet 5 amp on same board complete all as specified by Engineer-in-Charge. |
| 158 | All as per Srl item No. 155 here in before but for one switch socket combination 6 pin 5/15 Amp on independent board with copper conductor 2.5 Sqmmcomplete all as specified by Engineer-in-Charge. |
| 159 | S&F Switch piano flush type 5/6 Amps single pole one way complete all as specified by Engineer-in-Charge. |
| 160 | S&F Switch socket combination 5 pin, type 5/6 Amps flush type complete all as specified by Engineer-in-Charge. |
| 161 | S&F Switch socket combination 6 pin, type 5/16 Amps flush type complete all as specified by Engineer-in-Charge. |
| 162 | S&F Socket outlet 5 pin 5 Amps flush type complete all as specified by Engineer-in-Charge. |
| 163 | S&F ceiling rose surface bakelite three terminals flush type complete all as specified by Engineer-in-Charge. |
| 164 | S&F in replacement compat & decorative energy efficient LED mirror light fitting, with antiglare diffuser and decorative end caps suitable for 1x10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified and directed by Engineer - in -Charge |
| 165 | S & F in replacement of existing light fitting withLED batten W LED batten with "Eye Soft" technology & glarefree diffuser for perfect application in modern homes or aluminium housing andintegrated electronic driver,20 watt having input voltage AC90-300V, 50 Hz , 6500K, and all other accessories including connection with flexiblecable copper conductortwo coreof size 23/.2 mm upto ceiling rose/connectorcomplete all as specified and directed by Engineer - in -Charge. |
| 166 | S & F angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in -Charge. |
| 167 | S & F LED lamp 9W for angle holder complete all as specified and directed by Engineer - in -Charge |
| 168 | S&F LED light fitting 1x9W/1x10W bulkhead luminaires including LED light driver holder connection up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer - in -Charge. |
| 169 | S&F single pole and neutral enclosure with a two pin and earth plug and socket (industrial socket metal clad) complete with one single pole MCB complete all as specified and directed by Engineer - in -Charge. |
| 170 | S&F stepped type, single socket fan regulator for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in -Charge. |
| 171 | S&F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheated 6 sqmm (Normal Area) FRLSH stranded copper conductor drawn in and including pvc conduit dia 20mm "medium quality" conduit including 6.00 sqmm (Norminal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existeing colour, necessary juction box and covers including necessary connections, PVC flexible pipe are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in -Charge. (Note : (i) PVC cable and PVC conduit shall be ISI marked, (ii) Two Runs of two single core cable, one run of earth cable one & run of PVC counduit shall be measured as "One Run") |
| 172 | S&F in repairs sheet metal enclosure for double door DB made out of CRCA mild steel sheet surfae with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 volts ISI makred 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etccomplete all as specified and directed by Engineer - in -Charge. |
| 173 | S&F in repairs sheet metal enclosure for double door DB made out of CRCA mild steel sheet surfae with insulated material like polyester with epoxy powder coated surface mounted SP & N 12 ways, 240 volts ISI makred 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etccomplete all as specified and directed by Engineer - in -Charge. |
| 174 | S&F in repairs MCCB TP&N 63 Amps with breaking capacity 16KA, Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in -Charge. |
| 175 | S & F in replacement MCB ‘B’ series type suitable for 240 volts, AC supply5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in -Charge. |
| 176 | S & F in replacement MCB ‘B’ series type suitable for 240 volts, AC supply5 to 40 Amps, single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in -Charge. |
| 177 | M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mmthick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GIand protection by provisionof GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding50 mtrs all as per electric plate No.3 of SSR Part I and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on completion all as specified and directed by Engr -In - Charge |
| 178 | S&Fin replacement security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in -Charge . |
| 179 | S&F in repairs sheet metal enclosure for double door DBs made out of CRCA mild steel sheet surfae with insulated material like polyester with epoxy powder coated surface mounting VTPN 4 ways, 415 volts ISI makred 250 Amps bus bar stove enameled dust and vermin proof, IP:43 protection suitable for incorporation FP MCCB (V-Tech) N1 Frame upto 125A, Isolators and including give connection with wire and cable etccomplete all as specified and directed by Engineer - in -Charge. |
| 180 | Supply and Fix PVC body tent/industrial type desert cooler (1135x600x1535mm) alongwith four wheels, electric driven (single phase), 3 Speedmotor with 950 RPM, 30 inch axial type fan, noise level 68 db, having nominal aire flow capacity of 18000CMH/ 10500 CFM, large size, pad size (1100x100x1150mm), water tank 90L capacity, black color complete all as specified and directed by Engineer - in -Charge. |
| 181 | S&F steel body exhaust fan of 300mm sweep, 240 volt, 5 Star rating complete with louvers and shutter and mounted in suitable opening arrangement in wall and connection up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including braking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to disturbed wall in CM (1:4) white washing matching with existing color etc complete all as specified and directed by Engr -In - Charge |
| 182 | Supply and filling in Sand for Cable protection complete all as specified and directed by Engr-In-Charge. |
| 183 | Supply and lay standard size bricks subclass B type complete all as specified and directed by Engr-In-Charge. |
| 184 | M&L for fixing GI tubing (light grade) 80mm dia for cable protection laid under path / trench / wall / on pole complete all as specified and directed by Engr-In-Charge. |
| 185 | Supply and lay jointing and testing and commissioning in replacement of 25 Sqmmx4 core XLPE insulateed, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches / ducts / fixed on poles wall / laid under roads / paths / drain / culverts or passing through pipes complete all as specified and directed by Engr-In-Charge. |
| 186 | Supply, Fixing, testing & commissioning of electric chimney (90CM) with feature of baffle filter, inbuilt light, touch screen control panel, noise level, 58dB, stainless steel body, air suction capacity 1200 CMH, speed level 3, motor power 180 watt, input vol 220-240 V/50Hz, remote controlled and fitting in wall as connected or ductcomplete all as specified and directed by Engr-In-Charge. |
| 187 | Supply and fixing of MS powder coated fly catchers machine with dimensions (L 24.5" x D 5.5" x H 17"), light source philips actinic UV tubes (two tubes) capacity of 18 watt each of tubecomplete all as specified and directed by Engr-In-Charge. |
| 188 | Supply,intallation, testing and commissioning of heavy duty Chemical Dosing system plunger type suitable to inject solution upto 25 LPH working pressure 10 kg /cm2 comprising dosing pump coupled with three phase electric motor of capacity 0.5 HP, heavy duty Discharge pipe for doser of suitable length ,1440 RPM assembly with agitator in one motor, agitator with SS sweep blade duly FRP coated, FRP tank 150 ltrs capacity, complete unit mounted on heavy duty MS fabricated frame duly anticorrosive paint complete with Chemical grade PVC NRV, along with DOL starter Control panel for Dosing Pump suitable for Model SSAPS/CDSPT/25 made of powder coated MS fabricated box for outdoor use,consisting of LED indicator, digital Volt meter, Amp meter, single phase preventor, High voltage low voltage protection complete all as specified and directed by Engineer-in-Charge. |
| 189 | Supply,intallation, testing and commissioning of Inline Electromagnetic water Flow Meter- Remote type digital LCD Display with 8 meter long sensor cable and electric power cable, Different Units of flow rate and Total like Liter, Cubic meter and gallon etc. Connection: Flange End, Flange: CS, Flow Tube: SS 304, Electrode: Hastelloy, Lining Neoprene, Temp 90 oC Max. Accuracy: ± 0.5% of measuring value, Flow Velocity: 0 to 15 m/sec, Pressure Range: 16Kg/cm2 ,Power Supply: 24VDC/ 230 VAC, Signal output: 4-20 mA, Pulse, DN 300/ Size 12" Inch. Flow Range: 35 to 1250 M3/Hr, Sensors and converter IP66 complete all as specified and directed by Engineer-in-Charge. |
| 190 | M&L for cutting of existing CI/DI pipeline of dia 300 mm for insertion and fixing of bulk water meter / flow meter including all necessary jointing / fabrication work as required including all necessary CI/DI fittings flanged/spigot etc complete all as specified and directed by Engineer-in-Charge. |
| 191 | M&L for Brick masonry valve pit of size 1200x1200x1200 mm internal dimensions of the chamber including brick masonry with cement mortor 1.6 and flush pointing externally as the work proceeds 23 cm thick wall complete, suitable for sluice valves 250 mm & 300 mm bore, with the following specification and as directed by Engineer-in-Charge. (i) 10mm thick plaster in cm 1.6 externally (ii) PCC 1.36 type C-2 100mm think in foundauon (iii) flooring 40 mm thick in PCC 1.2.3 type B-l over 75mm thick hard core of guagen exc 63 mm thick (iv) Angle iron frame 40x40x6 mm thick for cover and handle ms sheet 3mm thick cover with interlocking arrangement handle and necessary hinges etc (v) Two coats of synthetic enamel paint to cover internally and externally over a coat of red |
| 192 | Note :(i) Amount ofcredit for retrieved materials is mentionedin Sch "A" Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
