Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #43171858

Tender For Day To Day Maintenance Of Buildings And Repairs To Drain, Hard Standing, Fencing And Gates At Aob Rambilli Visakhapatnam

Issued by Statutory Bodies & Commissions/Committees · rambilli, Andhra Pradesh
Tender Value
23 Lakhs
Estimated cost
Bid Submission
08 May 2024
0 days left
EMD
46000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
rambilli → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Day To Day Maintenance Of Buildings And Repairs To Drain, Hard Standing, Fencing And Gates At Aob Rambilli Visakhapatnam

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 01-May-2024 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 08-May-2024

BOQ

Name of Work:DAY TO DAY MAINTENANCE OF BUILDINGS AND REPAIRS TO DRAIN,HARD STANDING,FENCING AND GATES AT AOB RAMBILLI VISAKHAPATNAM .
Sl. No. Item Description
1Taking down cement or lime plaster in patches of any description from stone or brick wall or concrete surfaces of ceilling etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials where directed at low lying areas in Defence land complete all as specified and directed.
2M&L rendering 15mm thick plaster on fair faces of brick or concretesurfaces in CM 1:4 with WPC finished the surface even and fair without using extra cement complete all as specified and directed (WPC shall bemixedat 3%by weight of cement and rate for the same is included in quoted rate. ).
3M&L rendering 15mm thick plaster on fair faces of brick or concretesurfaces in CM 1:6 with WPC finished the surface even and fair without using extra cement complete all as specified and directed (WPC shall bemixedat 3%by weight of cement and rate for the same is included in quoted rate. ).
4M&L rendering 5mm thick plaster in patches inceiling,soffits of slab etc in CM 1:3 finished the surface even and smooth without using extra cement complete all as specified and directed
5M & L preparation of new plastered surfaces of wall and applying two or more coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Complete all as specified and directed.
6M &Lfor preparing new plastered surface of wall and applying two coats of cement base paint over a coat ofprimer complete all as specified and directed.
7M & L preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
8S&F in repair Aluminium body ( extruded section) Door closure hydraulically regulated designation no.3 universal type suitable for door shutters of 851to 1000mm in width and weight between 61 to 80 Kg and fixedcomplete all as specified and directed.
9S&F in repairdouble action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminiun alloy sheet foundation box , main body with stainless steel cover governing pivot made of brass , other parts made of mild steel heavy duty complete all as specified and directed .
10S & F in repairs for mortice latch with two levers (vertical type),100 mm long latch aluminium anodised body complete all as specified and directed .
11S&F in repair 100 mm longbutt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixedcomplete all as specified & directed
12S&F in repair 150 mm long aluminium handle fabricated type anodised.complete all as specified & as directed.
13S & F in repairs 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & as directed.
14S&F in repairs 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified & as directed.
15S & F 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane including hackingdown old broken glasses complete all as specified & as directed.
16All as per item no 15.00 here-in- beforebut frosted glass.
17S & F in repairs stainless steelwire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steelwire staples complete all as specified & as directed.
18Supply & fix in repairs curtain rods of aluminium annodisedfixed alongwithbracketsto walls with PVC rawal plugs complete all as specified & as directed.
19Taking upor down 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified & as directed.
20S&F15mm bore Galvanized steel tubes, medium grade for flush pipes, water supply pipes etc, fixed to walls and ceillings or laid in floors
21Taking up or or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified & as directed.
22S&F20 mm bore Galvanized steel tubes, medium grade for flush pipes, water supply pipes etc, fixed to walls and ceillings or laid in floors
23S&F in repairs plastic water closet seat, of white colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified & as directed.
24S &F in repairs 10 Ltr capacity PVC valveless symphonic action type flushing cistern, low level with inlet, ball valve, float all as specified including necessary flush pipe complete all as specified & as directed.
25S & F in repairs15 mm dia PVCconnection 450 mmlong with PTMT nuts and washers complete all as specified & as directed.
26S & F for urinal water spreader of PTMTwith 15 mm dia pipe fixed to bowl complete all as specified & as directed.
27S&Fin repairs stainless steel tubular towel rail, 20mm dia, D type, 60cm long between flanqes complete all as specified & as directed.
28S&F in repairs600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup wasners complete all as specified & as directed.
29S&F in repairs vitreous china water closet squatting pan \"Orissa pattern\"of size 580mmx440mmwhite with integral foot rest any pattern including all connection toflush and out let pipe complete all as specified & as directed.
30S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white including all connection to flush and out let pipe complete all as specified & as directed.
31S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe with connection to water pipe and waste pipe all as specified & as directed.
32S&F in repairs Vitreous China wash basin, white, flat back, size 550x4500mm , with grating and union for discharge pipe with connection to water pipe and waste pipe all as specified & as directed.
33S &Fin repairs 15 mmbore pillar taps, fancy type long body cast copper alloy, with capstan heads, chromium plated, screwed down high pressurewith long screwed shanks and fly nuts screwwed for iron pipe complete all as specified & as directed.
34S & F in repair 100mm to 125mm bore mild steel chromium plated grating fixed on floor trap/ nahni trapwith white cement all aroundcomplete all as specified & as directed.
35S & F in repairs 15 mm bore fancy type long body chromium plated bib taps screwed down, screwed for iron pipe or for brass ferrule complete all as specified & as directed.
36S & F in repairs 15mm bore stop valve cast copper alloy chromium plated screwed down high pressureconcealed typescrewed both ends for iron pipe or for unions complete all as specified & as directed.
37S&F in repairs CP shower rose 75 mm dia with or without swiveljoints any size, including fixing to steel pipe or unioncomplete all as specified & as directed.
38S &F in repairs 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified & as directed.
39S & F in repair health faucet (ABS body ) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & as directed.
40Dismantling floor, hearth or wall tiling including cement mortar bedding (but notbacking), removing serviceable tiles to store and rubbish off the premises complete all as specified & as directed.
41S & F non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including 15mm thick screed bed in CM 1:6complete all as specified & as directed.
42S & F colour Glazed ceramic tiles in vertical surface/wall 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles including 10mm thick screed bed in CM 1:4complete all as specified & as directed.
43S &F rotational moulded polyethylene water storage tank 500 Ltr capacity (Cylindrical vertical with closed top) triple layeredconstuction ISI marked hoisted and fixed in positionas specified in SSR part-Iincluding tank nipple. including dismantling old unserviceable tank and removing to store complete all as specified and directed.
44S &F rotational moulded polyethylene water storage tank 1000 Ltr capacity (Cylindrical vertical with closed top) triple layeredconstuction ISI marked hoisted and fixed in positionas specified in SSR part-I including tank nipple. including dismantling old unserviceable tank complete all as specified and directed.
45Cleaning and removing all scales, loose dirt etc. from water tank of capacity n.exc 500 ltrs and mouth of circulating pipesincluding removal of float valve and tank nipple and re fixing after cleaning complete all as specified and directed.
46Cleaning and removing all scales, loose dirt etc. from water tank of capacity1000 ltrs and mouth of circulating pipesincluding removal of float valve and tank nipple and re fixing after cleaning complete all as specified and directed.
47Cleaning of sewage lines of 100 mm dia size by rodding and cleaning with gunny bags / cotton rags etc tied with rod for removal of complete sludge in the line from manhole to manholecomplete all as specified and directed
48All as per item No 47.00 here in beforebut for 150 mm dia sewage lines.
49Cleaning of manholes after all the sludge of blocked lines comes into the manhole n.exc 1.50 mtr deep and getting out including removal of sludge to a distance n exc 50 m complete all as specified and directed.
50All as per item No 49.00 herein beforebut depth exc 1.50 mtr deep and n. exc 3.00 m deep.
51Taking out liquid/solid content from sump/septic tank/filter bed/soakage well and sewage lines by sewage sucker tanker & cleaning thoroughly including disposal of liquid/solid content out of the defence land complete all as specified and directed
52Demolition of unreinforced concrete in ground floors and pavingsexc 15 cm thickness (below or above ground level) complete all as specified and directed.
53M&L 75 mm thick PCC (1:4:8) type D-2 using 40 mm graded aggregates in sub base complete all as specified and directed
54M&L for 75 mm thick cement concrete 1:3:6 type C -2, using 40mm graded stone aggregate as in plinth protection laid to slope of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight complete all as specified and directed.)
55M&L forprovidng 40mm thick cement concrete 1:2:4 type B-2, using 40 mm graded stone aggregate as in road/ path, hard standing etc.with and including all necessary form work to divide the area in panels.
56M&L cement concrete chequrred tiles of size 25cmx25cmx22mm thick machine pressed , set and jointedand pointed in neat cement slurrywith grey cement and pigments including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
57M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade includinglaid over 25 mm thick sand cusioning in pattern with grey cement and pigment complete all as specified and directed.
58Demolition of brick work or stone/ boulder masonary,built in cement mortar including all quoins, pillars etc.complete all as specified and directed.
59M & L for brick workmasonry straight curved on plan exc 6.0m mean radius using flyash brickbuildin CM 1:6 ,complete all as specified and directed.
60M & L for brick workmasonry straight curved on plan exc 6.0m meanradius using flyash brick build in CM 1:4 as in half brick wall complete all as specified and directed.
61M & L for 1:2:4 type B-1 using 20 mm graded aggregate as inin lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbswater troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
62Dismantling posts or struts(wood, steel or R.C.C.) any section,embedded in concrete, brick work,masonary etc including taking out embedded portion and making good disturbed ground complete all as specified and directed.
63M & L for angle iron as inrunning bars, fordoors, balusters, nosing to stepsincluding bedding in concreteand screwing etc. wind ties forroof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed
64M & L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete including dismantling of old unserviceable steel gate/sections complete all as specified and directed.
65M&L for providing plain cement concrete, type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
66S & F4mm dia galvanised steel wire, 100x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed.
67M&L preparation of new or previously untreated surface of steeland iron work of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide primer complete all as specified & as directed.
68Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified & as directed.
69S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & as directed.
70Demolition of reinforced cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed.
71M&L for precast RCC slab type B-1 1:2:4 Nominal mixusing 20 mm graded aggregates set in CM(1:6) complete all as specified anddirected.
72M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
73Taking down shutter of any description exc 1 sq. mbut n exc 2 sq. m eachincluding fittings complete all as specified and directed.
74Taking down shutter of any description not exceeding1 sq. m eachincluding fittings complete all as specified and directed.
75S&F powder coated(minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
76S&F powder coated(minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beadingscrews etc. complete all as specified
77S&F powder coated(minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
78S&F prelaminated particle board exterior grade both side laminated fixed in portion or door framecomplete all as specified & as directed.
79S&F 5.5 mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified & as directed.
80Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover filletscomplete all as specified & as directed.
81S&F anodised aluminium snap grid frame work for false ceiling of size 605 x605 mm complete all as specifiedanddirected.
82S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
83S&F 6mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in600 mm x 600mm gridcomplete all as specified and directed.
84Total Amount in Figures
85Quoted Amount in Words

AI Tender Summary

OUR REF NO 43171858
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 23 Lakhs
LAST DATE 08-05-2024
Authority
Authority Name Military Engineer Services
Work Description Tender For Day To Day Maintenance Of Buildings And Repairs To Drain, Hard Standing, Fencing And Gates At Aob Rambilli Visakhapatnam
Basic Detail
Tender No GE(P) VARSHA/ TOKEN/10 OF 2023-24
Bidding Type Tender
Location
City rambilli
State Andhra Pradesh
Key Dates
Publish Date 01 May 2024
Submission Date 08 May 2024
Open Date 10 May 2024
Finance
Tender Value 23 Lakhs
Tender Fee 500
EMD 46000
Exemption Not Available
Document List
45259c36-2886-4fc6-9d9e-d8090b511303.html
BOQ_727787.xls
IPday.pdf
TenderDocumentsdaytoday.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

May 01, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
May 08, 2024
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
May 08, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
May 10, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

45259c36-2886-4fc6-9d9e-d8090b511303.html

xls

BOQ_727787.xls

pdf

IPday.pdf

pdf

TenderDocumentsdaytoday.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender