Tender For Welcome Maintenance Incl Petty Repairs At Sect D Under Age Br-I At Dinjan Mil Station
Tender Value
44 Lakhs
Estimated cost
Bid Submission
06 May 2024
0 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dinjan → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome Maintenance Incl Petty Repairs At Sect D Under Age Br-I At Dinjan Mil Station
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation of old decorated plastered surfaces of walls by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed. |
| 2 | M&L for preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed. |
| 3 | M&L for preparation of old plastered surfaces of walls by washing, rubbing down and scraping of existing distempering/painted surfaces etc and applying one coat of distemper oil emulsion complete all as specified and as directed. |
| 4 | M&L for preparation of old plastered surfaces of walls by complete removal of existing treatment including chalk whiting on wall etc and applying two coat of distemper oil emulsion over a coat of chalk whiting primer for distemper including 2mm thick wall care puttycomplete all as specified and as directed. |
| 5 | M&L for preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 6 | M&L for preparation of old painted wooden surfaces of any description not exceeding 10 cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 7 | M&L for preparation of new or untreated surfaces of wood of any description, not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 8 | M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 9 | M&L for preparation of old painted steel surfaces of any description not exceeding 10 cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paintall as specified and as directed.Note for Ser Items No 1 to 9 : Rates have been deemed to be included for Ladders, Brushes/Rolers, Buckets etc. Do not use building furniture while working. Floor/Wall area have to be cleaned after completion of work. |
| 10 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed |
| 11 | M&L for rendering 15 mm thick in two layer (10mm and 5mm thick) on fair faces of brick work or concrete surfaces in cement mortar (1:4)mixed with integral water proofing compoundat top 5mm thick layer weight of cement as per manufacturer\"s instructions and finished the surface even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid separately against respective item. |
| 12 | M&L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and fair without using extra cement complete all as specified and as directed. |
| 13 | M&L for rendering 5 mm thick in cement mortar (1:3) on concrete surfaces as in ceilings (sunshed, chajja, fins etc) and finishing surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 14 | Supply only liquid water proofing compound for external wall plastering (for 5 mm thick plastering) complete all as specified and as directed. |
| 15 | M&L for preparation of new plastered surfaces of walls etc and applying two coats of cement base paint over alkali resistent primer complete all as specified and as directed. |
| 16 | M&L for preparing newly plastered surfaces of walls, etc and applying two coats of distempering interior walls with distemper oil emulsion white or tinted over chalk whitingcomplete all as specified and as directed. |
| 17 | M&L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified and as directed. |
| 18 | M&L for preparation of new plastered surfaces of ceiling etc and applying three coats of white wash complete all as specified and as directed. |
| 19 | Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 20 | M&L for brick work with sub class \"B\" bricks straight or curved on plan exc 6 meter mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 21 | M&L for brick work with sub class \"B\" burnt clay bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed. |
| 22 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exceeding 1.50 Sqm each complete all as directed. |
| 23 | Taking down chowkhats or framewith shutters (without taking off shutters from frames) exceeding 1.5 Sqmbut not exceeding 4 Sqm each complete all as directed. |
| 24 | Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and as directed. |
| 25 | Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed. |
| 26 | Refixing of shutters in existing location/ opening not exceeding 1 sqm each including resecuring or easing & adjusting also refixing existing serviceable builders hardware complete all as specified and as directed. |
| 27 | Refixing of shutters in existing location/ opening exceeding 1 sqm but not exceeding 2sqm each including resecuring or easing & adjusting also refixing existing serviceable builders hardware complete all as specified and as directed. |
| 28 | Dismantling of unframed timber scantlings 40 sq. cm and over in section, in any position, complete all as specified and directed. |
| 29 | M&L for Second class hard wood in scantlings wrought timber fixed complete all as specified and as directed. |
| 30 | M&L for 2nd class hard wood plain, solid, straight chowkhats and frame wrought framed rebated on the soild, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed. |
| 31 | M&L for 35 mm thick second class hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressuretreated complete as specified and directed. |
| 32 | Supply and fixing 30mm thick second class class hard woodglazed and skelton shutter, open rebated and prepared to receive glass, gauze etc, (without sash bar), edges of framing plain, chamfered or rounded,fitted with cut and mitred beads for securing glass exc., size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a), complete all as specified and directed. |
| 33 | Supply and fixing 35mm thick second class class hard woodglazed and skelton shutter, open rebated and prepared to receive glass, gauze etc, (without sash bar), edges of framing plain, chamfered or rounded,fitted with cut and mitred beads for securing glass exc., size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a), complete all as specified and directed. |
| 34 | Supply and fixing Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and directed. |
| 35 | Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing, complete all as specified and directed. |
| 36 | M&L in repairs 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and otherside balancing white lamination, fixed with screws to timber frame work and fixed with wooden beading complete all as specified and as directed. |
| 37 | S&F in repair 5 mm thick sheet glass, ordinary quality and glazing with oil putty in squaresnot exceeding 0.50 Sqm in each pane, complete all as specified and directed. |
| 38 | S&F for 4 mm thick, figured glass, pin head type and glazing with oil puttyin square not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 39 | S&F for 5.5 mm thick, sheet glass,ordinary quality and glazing with oil puttyin square not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 40 | S&F for galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staplesincluding timber bead complete all as specified and as directed. |
| 41 | S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staplesincluding timber bead complete all as specified and as directed. |
| 42 | S&F for aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sectionsor cast aluminium alloy, length of bolt of 300 mm anodised finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and as directed. |
| 43 | S&F in repair aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sectionsor cast aluminium alloy, length of bolt of 300 mm anodised finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and as directed. |
| 44 | S&F for 150 mm long, aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic filmcomplete all as specified and as directed. |
| 45 | S&F in repair 150 mm long, aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic filmcomplete all as specified and as directed. |
| 46 | S&F for 100 mm long, aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic filmcomplete all as specified and as directed. |
| 47 | S&F in repairs 100 mm long, aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic filmcomplete all as specified and as directed. |
| 48 | S&F for 100 mm size, butt hinges, heavy weight, cold rolled mild steel complete all as specified and as directed. |
| 49 | S&F in repair 100 mm size, butt hinges, heavy weight, cold rolled mild steel complete all as specified and as directed. |
| 50 | S&F in repair 150 mm size, aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and as directed. |
| 51 | S&F for 150 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and as directed. |
| 52 | S&F in repairs 20mm dia harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers, etc as in curtain rail complete all as specified and as directed. |
| 53 | M&L for providing pelmet boxes in repair using 12mm thick particle board, medium density, flat pressed, single layer type with BWR type adhesive, fixed with screws complete all as specified and as directed. |
| 54 | Dismantling floor hearth or wall tiling and stone slabs including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises etc complete all as directed. |
| 55 | M&L for glazed, ceramic, colouredtiles of size 450mm x 350mm x 6-7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick backing coat in cement mortor (1:4) and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed. |
| 56 | M&L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, including 15 mm thick screed bed or bedding in cement mortor (1:6) and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed. |
| 57 | M&L for vitrified, ceramic, coloured (light shade) tiles 10mm thick (square/ rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc, including 15 mm thick screed bed or bedding in cement mortar (1:6) and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed. |
| 58 | M&L for vitrified, ceramic, coloured (light shade) tiles 10mm thick (square/ rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in skirting etc, including 10 mm thick backing coat in cement mortar (1:4) and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed. |
| 59 | M&L for 20mm thick granite (of any type) (table rubbed and polished) in steps, jambs, pillars, window cills, cookingplatform, and likein cement mortar (1:4)including pointing in white cement (1:2) using marble dust with admixure of pigment to match the shade of granite complete all as specified and directed. |
| 60 | Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 61 | M&L for 75 mm thick,plain cement concrete(1:3:6) typeC-2 (using 40mm graded stone aggregate) as in plinth protection, footpath, etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand (1:2) making impressions of expanded metal whilst the concrete is green complete all as specified and as directed. |
| 62 | M&L for plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and as directed. |
| 63 | M&L for 40 mm thick, plain cement concrete (1:2:4) type B-1 (using 12.5 mm graded stone aggregate) as in sub base finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 64 | S&F in repair 500 litres capacityrotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe and incl 20 mm bore,ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and as directed. |
| 65 | S&F in repair 1000 litres capacityrotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe and incl 20 mm bore,ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and as directed. |
| 66 | Disconnecting existing water tanks exc.250 Ltrs not exc. 500 Ltrs setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and as directed. |
| 67 | Disconnecting existing tanks exc.500 Ltrs not exc. 1000 Ltrs setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and as directed. |
| 68 | M&L for cleaning and removing all scale and dirt, etc, from tanks exc.250 Ltrs not exc. 500 Ltrs and from mouths of circulating pipes, etc. complete all as specified and as directed. |
| 69 | M&L for cleaning and removing all scale and dirt, etc, from tanks exc.500 Ltrs not exc. 1000 Ltrs and from mouths of circulating pipes, etc. complete all as specified and as directed. |
| 70 | S&F in repair 20 mm bore,ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and as directed. |
| 71 | S&F in repairs 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 72 | S&F in repairs 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 73 | S&F in repairs vitreous china squatting pan, \"Orissa\"pattern, size 580 x 440 mm white with integral foot rest and \"P\" or \"S\" trap, including provision of lime concrete bedding, connection to trap and flushing pipe providing 110mm PVC WC connector etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and as directed. |
| 74 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to outgoing drain andflushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and as directed. |
| 75 | S&F in repairsplastic water closet, seat and cover for pedestal pan, white / black, closed pattern with flat bottomand mild steel chromium plated or aluminium hinging device complete all as specified and as directed. |
| 76 | S&F in repairs 15mm bore, PVC connection pipe 600 mm long with PTMT nuts at both ends complete all as specified and as directed. |
| 77 | S&Fin repairs 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white,with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and as directed. |
| 78 | S&F in repairs 600mmX450mm bevelled edge mirror of selected quality 5mm thick glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated cup washers and screws complete all as specified and as directed. |
| 79 | S&F in repairs brass chromium plated tubular towel rail, D type, 60cm long, 20mm dia with brackets complete all as specified and as directed. |
| 80 | S&F in repairs soap dish vitreous china coloured approximate size(160X160X90mm) complete all as specified and as directed. |
| 81 | S&F in repairs vitreous china wash basin, size 550 x 400mm, white, flat back, excluding waste pipe, waste coupling, chain, plug and porcelean stopper & backets but including cutting for and pinning in ends of brackets complete all as specified and as directed. |
| 82 | S&F in repairs 15 mm bore stop valves, cast copper alloy, chromium plated, screwed downhigh pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 83 | S&F in repairs 15/20 mm bore stop valves (concealed type), cast copper alloy, chromium plated with long shank and cup, screwed downhigh pressure, screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 84 | S&F in repairs 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered \"Hot or Cold\" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. |
| 85 | S&F in repairs, 15mm cromium plated bib taps, cast copper alloy with crutch orbutterfly handle, fancy type,screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 86 | S&F in repairs brass cast copper alloy chromium plated shower rose, 125mm size with shower arm 15mm size, 195mm long with bend of 45 degree with flange complete all as specified and as directed. |
| 87 | Taking up or down 15 mm bore steel water tubing galvanised including connections from trenches/wall/floor/ceiling etc and keeping serviceable quantity in safe custody for re-use at same site or other site complete all as specified and as directed. |
| 88 | Taking up or down 20 mm bore steel water tubing galvanised including connections from trenches/wall/floor/ceiling etc and keeping serviceable quantity in safe custody for re-use at same site or other site complete all as specified and as directed. |
| 89 | Supply, laying, connection and testing, 15mm bore, steel water tubing, galvanised, medium grade conforming to IS 1239 (Part -1):2004 with all fittings conforming to IS 1239 (Part -2):2011 and fixturescomplete fixed to walls and ceilings or laid in floors, etc complete all as specified and as directed. |
| 90 | Supply, laying, connection and testing, 20mm bore, steel water tubing, galvanised, medium grade conforming to IS 1239 (Part -1):2004 with all fittings conforming to IS 1239(Part -2):2011 and fixturescomplete fixed to walls and ceilings or laid in floors, etc complete all as specified and as directed. |
| 91 | S&F in repair toilet paper holder of vitreous china, fixed to walls with chromimum plated brass screws complete all as directed. |
| 92 | M&L in repair 75 mm dia outlet , PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed. |
| 93 | S&F for grating doom, circular type, 100mm dia of PTMT, (mimimum weigh 25 gms) complete all as specified and as directed. |
| 94 | S&F for sink made of stainless steel 1.00mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, including 40mm dia flexible PVC waste pipe, oberall size 495X420 and bowl size 410X330X160mm all as directed. |
| 95 | S&F for sink with drainage board made of stainless steel 1.00mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, including 40mm dia flexible PVC waste pipe, oberall size 915X460 and bowl size 410X330X160mm all as directed. |
| 96 | M&L for cutting chases, pinning in brick walls, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20 cm girth complete all as specified and as directed. |
| 97 | S&F for 375mm mild steel ordinary rat rail, rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 98 | S&F in repair 110 mm bore, UPVC (SWR), Type \"B\", Soil waste and vent pipes in any lengthwithout ears, with rubber ring joints laid in trenches, floor complete all as specified and as directed. |
| 99 | S&F in repair 110 mm bore, UPVC (SWR), Type \"B\", Soil waste and vent pipes in any lengthwithout ears, with rubber ring joints fixed to wall complete all as specified and as directed. |
| 100 | S&F in repair 75 mm bore, UPVC (SWR), Type \"B\", Soil waste and vent pipes in any lengthwithout ears, with rubber ring joints laid in trenches, floor complete all as specified and as directed. |
| 101 | S&F in repair 75 mm bore, UPVC (SWR), Type \"B\", Soil waste and vent pipes in any lengthwithout ears, with rubber ring joints fixed to wall complete all as specified and as directed. |
| 102 | S&Ffor PVC (SWR) branch piece single (single Y) 110mm bore with access door complete as required and as specified and as directed. |
| 103 | S&Ffor PVC (SWR) branch piece double (double Y) 110mm bore with access door complete as required and as specified and as directed. |
| 104 | S&F for 110mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. |
| 105 | S&Ffor PVC (SWR) branch piece double (double Y) 110mm bore with access door complete as required and as specified and as directed. |
| 106 | S&F for 110 mm bore, PVC (SWR) bends of any radius complete all as specified and as directed. |
| 107 | S&F in repair PTMT(half or full threaded) waste coupling 32/40mm for sink (min weight 32mm - 45gms/40mm - 60gms) complete all as specified and as directed. |
| 108 | M&L for preparation of new plastered surfaces of wall and applying a coat of primer 3mm thick wall care putty to a smooth surface complete all as specified and as directed. |
| 109 | Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings with ridges complete all as specified and as directed. |
| 110 | M&L for 6 mm thick asbestos cement sheet, corrugated, or semi corrugated sheets as in roofs, etc. and fixed with \"L\" type or \"J\"-type or cranked hook bolts, complete all as specified and as directed. |
| 111 | M&L for 6 mm thickasbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheet, fixed with \"L\" type or \"J\" type hook or cranked hook bolt withwasher complete all as specified and as directed. |
| 112 | S&F in repair 15 mm bore, self cleaning water jet, universal type, chromium plated with fixing accessories complete all as specified and as directed. |
| 113 | S&F in repair health faucet cast copper alloy with push button & 1m long flexible steel pipe with PVC lining suitable for 15mm bore pipe complete all as specified and directed. |
| 114 | S&F for 15mm dia angle stop cock with flange all as specified and as directed. Make: Cat. No. G1807A1 of Parryware/ Hindware/Cera. |
| 115 | S&F for PVC parryware corner shelf complete all as specified and as directed.Make : Cat No. T6010A1 of Parryware/ Hindware / Cera. |
| 116 | S&F for flexible PVC waste pipe of 32mm dia and 1.2 metre long each, fitted to basin or sink all as directed. |
| 117 | S&F in repair PVC mirror cabinet of size 440x325x120mm and fixed to wall complete all as specified and as directed. |
| 118 | M&Lfor water proofing treatment on RCC roof etc. comprising with the following operation and as specified herein below and as directed:-(a)Taking down existing old tarfelt, bituminous compoundincluding cleaning & removing debris to a distance exc 100m & n.exc.250m. (b)M&L 15 mm thick plastering in cement mortar 1:4 finished even & smooth. (c)Preparing & cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 liters per sqm conforming IS-3384. (e) A layer of APP based polymeric membrane membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric(weighing not less than 160 gms/sqm )shall be applied over bituminous primer as specified above.Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (f) One coat of aluminium paint over the APP based membrane @ 0.11 Kg/Sqm. Note :- Prior to execution of the APP Membrane works, leak proof test shall be done by ponding water on roof slab to minimum depth of 25 mm. The entire roof slab shall be flooded with water for 48 hours. The necessary barrier shall be made to make feasible to stagnate water for 48 hours on roof slab. |
| 119 | Taking down carefully aluminium/copper point wiring (light, fan, socket or power)including unserviceablelight fittings, switch board complete,switch sockets, ceiling roses, pendants, regulators, sockets, etcand removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. |
| 120 | M&L for point wiring with 1.5 Sqmm (nominal area), FRLSH PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLHSPVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point terminated in and including 1.6mm thick mild steel sunken terminal box of suitable size with 3mm thick hylam sheet top cover fixed with suitable size ofbrass screws suitable sizes cadmium plated iron screws and washers etc.for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one, one way switches complete all as specified and as directed. |
| 121 | All as per item here-in-above but one 3 pin switch socket combination, 5 Amps on Independent board. |
| 122 | All as per item here-in-above but one 5 Amps, 3 pin socket outlet on the same board with other switches. |
| 123 | All as per item No. 02 above but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire forone 15/16 amp multi socket out let on independent board complete all as specified and directed by Engineer-in charge. |
| 124 | M&L for concealed point wiring with 1.5 Sqmm (nominal area), FRLSH PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including PVC conduit with all fittings and accessories of PVC conduit (like Tee, bend etc.) completewith and including 1.5 Sqmm (nominal area) FRLSHPVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point terminated in metal flush box of suitable size for mounting switches, sockets, regulators etc including cutting chases and making good by using cement mortar 1:4 complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and as directed. |
| 125 | All as per item here-in-above but one 3 pin switch socket combination, 5 Amps on Independent board. |
| 126 | All as per item here-in-above but one 5 Amps, 3 pin socket outlet on the same board with other switches. |
| 127 | All as per item here-in-above but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire for one 5/15 Amps switch socket combination on Independent board. |
| 128 | S&F for switch piano, 5 Amp single pole, flush type one way 230 volts complete all as specified and as directed. |
| 129 | S&F for switch socket combination, 2 in 1, 3 pin, 5 Amps,flush type, 240 volts complete all as specified and as directed. |
| 130 | S&F for switch socket combination, 2 in 1, 5 Amps, 240 volts, flush type complete all as specified and as directed. |
| 131 | S&F for socket outlet, 5 in 1,5/16 Amps, 240 volts, flush type complete all as specified and as directed. |
| 132 | S&F for bell push, flush type, 5 Amps 230 Volts, complete all as specified and as directed. |
| 133 | S&F for call bell (Ding-Dong),AC, 230 volts, single pole including suitable PVC block/box complete all as specified and as directed. |
| 134 | S&F for ceiling rose, 3 phase /PVC/ polycarbonate, isolated body including suitable PVC block/boxcomplete all as specified and as directed. |
| 135 | S&F for stepped type electronic fan regulator (5 step)flush typecomplete all as specified and as directed. |
| 136 | S&F for 18 Watt surface and wall mounting type LED batten with polycarbonate housing & integrated complete all as specified and as directed. |
| 137 | S&F for 12 Watt surface mounted downlight with white powder coated polycarbonate housing and pressure die cast heat sink having high efficiency elegantly designed sleek complete all as specified and as directed. |
| 138 | S&F for 25 Watt LED building security light new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens with Toughned Glass having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 including all fixing arrangement and complete all as specified and as directed. |
| 139 | S&F for 9 Watt surface and wall mounting type LED batten with polycarbonate housing & integrated complete all as specified and as directed. |
| 140 | S&F lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. |
| 141 | S&F for LED Lamp 9 Wattcomplete all as specified and as directed.Make : Havells or equivalent make of Philips/Bajaj as approved. |
| 142 | S&F in repair new PVC rectangular block for mounting, DB, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep,complete all as specified and as directed |
| 143 | S&F in repair newPVC rectangular block for mounting, DB, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm and 50 mm deep,complete all as specified and as directed |
| 144 | S&F newPVC rectangular block for mounting, DB, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep, including taking down old unserviceable one complete all as specified and as directed |
| 145 | Taking down unserviceable sub-main wiring up to 10 sqmm withrigid steelconduits/PVC casing-caping including cutting chases for taking out conduits and making good disturbed surfaces complete all as specified and as directed. |
| 146 | M&L for sub main wiring with two run of 6 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping/conduit of suitable size,fixed to wall/ceiling etc including one run of 6 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor(FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed.Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets. |
| 147 | M&L for sub main wiring with two run of 4 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables(FRLSH), 1100 Volts grade drawn through PVC casing-caping/conduit of suitable size,fixed to wall/ceiling etc including one run of 4 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed.Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length. (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets. |
| 148 | M&L for sub main wiring with two run of 2 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables(FRLSH), 1100 Volts grade drawn through PVC casing-caping/conduit of suitable size,fixed to wall/ceiling etc including one run of 2 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed.Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length. (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets. |
| 149 | S&F in repairs switch piano, flush type, 5 Amps, single pole, one way,230 Volts complete all as specified and as directed.Note: colour of new switch matched with existing switch, socket & box. |
| 150 | S&F in repairs socket outlet, 2 in 13 pin , 5 Amps complete all as specified and as directed. Note: colour of new switch matched with existing switch, socket & box. |
| 151 | S&F in repairs switch socket combination 2 in 1, 5 pin, 5 Amps,flush type, 240 volts complete all as specified and as directed. Note: colour of new switch matched with existing switch, socket & box. |
| 152 | S&F in repairs switch socket combination 5A/ 16A, 5 in 1flush type, 240 V complete all as specified and as directed. |
| 153 | S&F in repairs bell push, flush type, 5 Amps 230 Volts, complete all as specified and as directed. |
| 154 | S&F in repairs call bell (Ding-Dong), AC, 230 volts, single pole including suitable PVC block/box complete all as specified and as directed. Note: colour of new switch matched with existing switch, socket & box. |
| 155 | S&F in repairs ceiling rose, 3 way PVC insulated body complete all as specified and as directed. |
| 156 | S&F in repairs stepped type, electronic fan regulator, 220 volts, flush type complete all as specified and as directed. |
| 157 | S&F in repair modular switch, 6A, single pole, one way, one module, 240 V, AC, 50 Hz, ordinary (IPXO), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design A complete all as specified and as directed. |
| 158 | S&F in repair modular switch, 16A, single pole, one way, one module, 240 V, AC, 50 Hz, ordinary (IPXO), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design A complete all as specified and as directed. |
| 159 | S&F in repair (3 pin and 2 pin) combined modular socket outlets, 6A, 2 modules, 240 V, AC, 50 Hz with earthing contact, rewirable, pillar type terminal, normal protection, unenclosed, without Shutter, Flush type, Design B complete all as specified and as directed. |
| 160 | S&F in repair modular switch socket combination, 3 modules with (3 pin and 2 pin) having two earthing pins, combined socket outlets, 6A & 16A, 240 V, AC, 50 Hz with earthing contact, rewirable, pillar type terminal, normal protection, unenclosed, without Shutter, Flush type, Design B and switch, 16 A, single pole, one way, 240 V, AC, 50 Hz, ordinary (IPXO), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design A complete all as specified and as directed. |
| 161 | S&F in repair modular fan regulator, 120 W, 2 modules complete all as specified and as directed. |
| 162 | S&F in repair 9/10 W surface and LED wall bracket light aesthetically designed with B22d & E27 lamp holder with polycarbonate housing and intigrated electronic driver complete all as specified and as directed.Make : Halonix, Cat No : HLWB-01-B22) or equivalent make Havells/ philips/ Bajaj/ CG/ wipro/crompton/Eveready |
| 163 | S&F in repair 18 W surface and wall mounted LED Battern with polycarbonate housing and intigrated electronic driver complete all as specified and as directed. |
| 164 | S&F in repair 9 W surface and wall mounted LED Battern with polycarbonate housing and intigrated electronic driver complete all as specified and as directed. |
| 165 | S&F in repair25 Watt LED building security light new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens with Toughned Glass having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 including all fixing arrangement and complete all as specified and as directed. |
| 166 | S&F in repairs recess mounted deep drawn PLANO size (2 ft x 2 ft) CRCA housing with higher power 42 Watt LED Seamless front frame with flat white hight transmission acrylic cover complete all as specified and as directed.Make : Cat. No. PLANO 2x2 PLR 42 W LED 840S of Havells or equivalent make ofAppendix \"A\". |
| 167 | S&F for sheet metal enclosure TPN board distribution (DB)having facility to fix MCCB in incomer and MCBs in outgoing, TPN 4 ways, IP-43 with metal door type complete fitted with bus bars , neutral links, blanking plates including making dgood disturb surface, including taking down old unserviceble MCB DBcomplete all as specified and as directed. |
| 168 | S&F in repair MCCB of four pole type, 160 Amps current capacity, thermal magnetic, type, 36 KA breaking capacity, 415 Volts complete all as specified and as directed. |
| 169 | S&F for single pole and neutral enclosure with a two pin and earth Plug and socket complete with one single pole MCB of 20 Amps rating complete all as specified and directed. |
| 170 | S&F in repairs lamp holder , PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed. |
| 171 | S&F in repairs 3 mm thick, PVC hylam sheet 3mm top cover of size25cmx 20cm complete all as specified and as directed. |
| 172 | S&F in repairs 3 mm thick, PVC hylam sheet top cover of size17.5cm x 10cm complete all as specified and as directed. |
| 173 | S&F in repairs 3 mm thick, PVC hylam sheet top cover of size10cm x 10cm complete all as specified and as directed. |
| 174 | S&F in repair factory made board distribution (DB) double door in sheet metal enclosure with common bus bar at incomming end bus bar,triple pole & neutral(TPN), 4 way,415 Volts suitable for fixing MCBs including complete all as specified and as directed. |
| 175 | S&F in repair factory made board distribution (DB)double door in sheet metal enclosure with common bus bar at incomming end, single pole & neutral,8 way, 240 Volts suitable for housing MCBsincluding complete all as specified and as directed. |
| 176 | S&F in repair factory made board distribution (DB)double door in sheet metal enclosure with common bus bar at incomming end, single pole & neutral,4 way, 240 Volts suitable for housing MCBsincluding complete all as specified and as directed. |
| 177 | S&F in repair MCB, four pole, 415 Volts,63 Amps, breaking capacity 10 KA complete all as specified and as directed. |
| 178 | S&F in repair MCB,double pole, 240 Volts,6 to 32 Amps, \"C\" Series, 10KA capacity complete all as specified and as directed. |
| 179 | S&F in repair MCB, \"C\" Series, SP, 240 Volts,6 to 32 Amps, \"C\" Series, 10KA capacity complete all as specified and as directed. |
| 180 | S&F in repair MCB, \"C\" Series, SP, 240 Volts,40- 63 Amps, \"C\" Series, 10KA capacity complete all as specified and as directed. |
| 181 | S&F in repair sheet metal enclosure for MCB DB single door, single pole & neutral, two way, 240 V with common bus bar at incoming end complete all as specified and as directed. |
| 182 | S&F in repair PVC casing caping of size 20-25 mm complete all as specified and as directed. |
| 183 | S&F in repair PVC casing caping of size 25-32 mm complete all as specified and as directed. |
| 184 | M&L for earthing complete with GI earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25m below ground levelwith the top edge of earth plate at depth not less than 1.5m below ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers protected by 15mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, pre-cast RCC 1:2:4 type B-1, cover slab of size 350x350x50mm reinforced with 8mm dia TMT steel bars @ 15cm centre to centre in both direction and 10mm dia MS handle of suitable size, charcoal or coke and salt in alternative layers, necessary earth work in soft/loose soil all as shown in Electrical Plate No 3 of MES Schedule Part I and testing the base in which pit cover rests made up of MS angle iron (Frame) complete as specified and as directed. |
| 185 | M&L for test point terminal box made of gun metal or phosphorous bronze,size 75x75x25 mm, drilled and screwed and screwed including 03 Nos 8mm dia 25 mm long hexagonal head screwed including removing the old unserviceable one complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Apr 15, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMay 06, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 13, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender