Military Engineer Services-MES has published Tender For Removal And Replacement Of 05 Aluminum Doors With Wooden Doors Of Admin And Atc Building, Refurbishing Of Technical Library In Aed/Ald, Replacement Renewal Of False Ceiling In Office Spaces Of Met Department Alongwith Provision Of Integrat. Submission Date for this Tender is 18-05-2024. Door Tenders in panvel Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 06-May-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-05-2024 |
| 2 | 13-May-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-05-2024 |
| Sl. No. | Item Description |
| 1 | M&L for taking down Aluminium Section fixed with Glass panels of Doors and Entrance Decorative glass sheet fixed with Aluminium section not exc 10 Sqm each, including beading etc completeall as specified and directed. |
| 2 | M&L forSecond Class Hard Wood wroughttimber scantling framed and fixed include for lapping, halving, tabling, scarfing, notching, birds mouth cutting, splayed or bevelled ends, boring for and fixing of bolts, waste, etc. and hoisting and fixing in position and also for small labours like splaying, chamfering, rounding angles and nosings as in wall panneling , door frame and chowkats etc ,complete all as specified and as directed. |
| 3 | M&L for 0.90 mm thick decorative laminate type 1,laminates on flat or curved surfaces in any size or width , of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer"sinstructions completeall as specified and directed.. |
| 4 | M&L IInd class hard wood Plain fillets sectional area exc. 13 sq.cm and n exc 25 sq cm ,wrought, bullnoseed, splayed, chamfered or rounded on one edge or face on wall panneling block board in framed work with nails complete all as specified and as directed. |
| 5 | M&L forincluding preparing surfaces of wood and wood based materials, new of any description and girthe, not otherwise described and treated with creosotetwo coat complete all as specified and as directed. |
| 6 | S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc.but divided into squares, with plain, chamfered or rounded, mitred and rebated sashbars, any numbers for securing glass, etc. completeall as specified and directed. |
| 7 | S & F6.3 mm thickSheet glass, Selected quality and glazing with oil putty/second class hard wood beadings in square exc 0.5 sq. M in each pane completeall as specified and directed. |
| 8 | S & F 150 mmExtruded brass handles, fabricated type polished fixed to doors. Windows etc completeall as specified and directed. |
| 9 | S&F floor door stopper 150 mm of but of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm |
| 10 | S&F Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11, 125 mm in size all complete as specified and directed. |
| 11 | S&F Mortice lock, vertical type size Brass body ,size 65 mmmm in size all complete as specified and directed. |
| 12 | Door closer hydrau-lically regulated,designation No. 3, universal type,Aluminium Extruded section body, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed to doors completeall as specified and directed. |
| 13 | M&L for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed completeall as specified and directed. |
| 14 | M&L for Dismantling Plywood boarding, any description, fixed in any position with screws to cupboards racks etc completeall as specified and directed. |
| 15 | M&L for Dismantling wooden work asin fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in framed workcompleteall as specified and directed. |
| 16 | M&L for taking down chowkat Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame) for architraves,soffits, linings, window boards, etc completeall as specified and directed. |
| 17 | M&L Ist class hard wood Plain fillets sectional arean exc. 3 sq.cm,wrought, bullnoseed, splayed, chamfered or rounded on one edge or face on wall panneling block board with nails complete all as specified and as directed. |
| 18 | M&L for18 mm thickblock boards, grade 1 quality exterior grade commercial type fixed withbrass screw and cups to timber frame work as in wall panneling,cupboards completeall as specified and directed. Make : Kitply, Century or equivalent |
| 19 | Taking down shutter of any description exc. 1.0 Sqm but n exc 2.0 Sqm each and removal from site completeall as specified and directed. |
| 20 | S & F 30 mm thick second glass hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc.but divided into squares, with plain, chamfered or roun- ded, mitred and rebated sashbars, any numbers for securing glass, etc. all completeall as specified and directed. |
| 21 | S & F 3mm thickSheet glass, Selected quality and glazing with oil putty/second class hard wood beadings in square n exc 0.5 sq. M in each pane completeall as specified and directed. |
| 22 | S & F 125 mm extruded aluminium alloy handles, fabricated type, anodised completeall as specified and directed. |
| 23 | S&F Anodised aluminium powder coated frame for doors, windows, ventilatorswith one or more rebates including joining cleat for fixing os shuttersetc. completeall as specified and directed. |
| 24 | S&F Anodised aluminium powder coatedwindow and ventilators sliding windows, Ventillators, partitions and , shutters of required sizes, section weighing 0.55 kg/Sqm of thee or four way as directedincluding necessary rubber gasket, PVC wheel with ball bearing, concealed type lock and fixing of glass complete all as specified and directed. (Note: (i)The measurement shall be recorded over all shutter area only and rate quoted shall deemed inclusive of rubber gasket, rubber beading, PVC wheel with ball bearing, concealed type locks, handle etc(ii) Glass/gauze shall be measured and paid separately completeall as specified and directed. . |
| 25 | S&F aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with aluminium window complete all as specified and as directed. |
| 26 | S&F 4.80 mm thick float glass ordinary quality fixed in aluminium sliding window shutters etc, area of each glass n.exc 0.50 Sqmcomplete all as specified and directed. |
| 27 | S&F floor door stopper 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm completeall as specified and directed. |
| 28 | S&F Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 100 mm in size completeall as specified and directed. |
| 29 | S&FLocks, drawer, grade I, Aluminium body ,size 50 mmmm in size completeall as specified and directed. |
| 30 | Supply & fixing in repairs false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per Sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per Sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1OOOmm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and completeall as specified and directed. |
| 31 | Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of debries outside from MD land, making good as edge with CM 1:3 all as specified and directed |
| 32 | Dismantling of plain or corrugated steel sheeting any guage, thickness, from roof covering / vertical clading from hangar height not exceeding 20 metres, complete all as specified and directed. |
| 33 | Dismantling wrought iron or mild steel work of any description and otherwise provided for, complete all as specified and directed. |
| 34 | Cutting channels, grooves or rebates exc 15 cm but n exc 30cm girth with or with out reinforcement and making good in CM 1:4 to receive RCC drain cover and flushing with dispersal, removal of debries out side MD landall as specified and directed. |
| 35 | Sufrace excavation n. exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil. |
| 36 | Fair cutting n exc 10cm width or girth on exposed surfaces of brick work such as in splays, chamfers, straight or raking cutting including rubbed finish and waste, removal of debries out side from MD land and making good in CM 1:4 all as specified and directed. |
| 37 | Excavation in post holes each n.exc 0.50 cum getting out as in hard/dense soil, ruturning filling in and ramming earth in layers n.exc 25 cm watering and removing surplus soil out side from MD land all as specified and directed. |
| 38 | Excavation in trenches n. exc 1.5m wide and n exc 1.5 m deep for foundations etc and getting out in hard/dense soil. |
| 39 | M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundations filling and mass concrete etc. |
| 40 | M&L for brick work with subclass "B" bricks, straight or curved on plan exc 6m mean radius built in cement mortar in1:6 including demolition of old brick work built in any mortar comple all as specified and directed |
| 41 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 all as specified and directed |
| 42 | S&F for rolled mild steel compound girder and stanchions, lattice girders built up from two or more beams or channels or angle conforming to FE-290 (Gde E-165) |
| 43 | S&F rolled mild steel section, conforming to FE-290 (Gde E-165) quality -A as in rafter, purlins, where connected independently to common rafter and running rails, fixed with angle cleats or other connected plates all as specified and as directed. |
| 44 | All as per Serial Item No.43but Eretion and fixing only. |
| 45 | S&F Framed work such as grills, gratings, etc with ends of bars shouldered and /or riveted, or forged into spikes;framed guard bars etc conforming to FE-290 (Gde E-165) |
| 46 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut size of bolt 11 to 15mm dia and exc 10cm and n exc 15cm long all as specified. |
| 47 | M&L for two coats of synthetic enamel paint on steel surfaces girth exc 10 cm and over a coat of red oxideincl preparation of new steel surfaces complete all as specified and directed. |
| 48 | M&L for preparation of existing old painted steel surfaces girth exc 10 cm and applying one coat of synthetic enamel paint (1st quality) complete all as specified and directed. |
| 49 | M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in hangar door /cladding to wall, height n.exc 20m, fixed with self tapping screws complete all as specified and directed. |
| 50 | M&L Pre- painted galvalume aluminum zinc coating GI basedplain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in valley gutter/ridge etc fixed with self tapping screws complete all as specified and directed. |
| 51 | M&L for Cement concrete 1:2:4 type B2 using 40mm graded stone aggregate in foundations, filling and mass concrete for errection of posts all as specified and directed by EIC. |
| 52 | M&L for hardcore of broken stone or boulders of gauge n exc 63mm spread and levelled in layers n exc 15cm thick each layer , watered and rammed to a true surface etc.,complete,all as specified and directed. |
| 53 | All as per Serial item No 52 but except materials. |
| 54 | M&L for 100mm thick PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in Sub base of floor to receive floor finishes. |
| 55 | M&L for Machine pressed precast concrete interlocking coloured paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade mixed with grey cement andpigment over and including50mm thick sand filling /cushioning under floors complete all as specified and as directed. |
| 56 | M&L for cement concrete in surface channels and drains, coping and kerbs etctype B-1 (1:2:4)(20 mm graded stone aggregate) complete all as specified and directed. |
| 57 | M&L for precast reinforced cement concrete (M-20 nominal mix), type A-1 (20 mm graded aggregate)as in manhole/drain cover slabs etc set in CM (1:4) including use and waste of formwork and finishing top surface of cover slab even and smooth using extra cement etc including demolition of old workcomplete all as specified and directed. Note :Steel reinforcement shall be measured and paid separately. |
| 58 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including ild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 59 | Removal of surplus excavatedsoil fromMD land to out side MD land distance exceeding 500 metre but not exceeding 1.5 kilometreas directed by Engineer-in-Charge. |
| 60 | M&L for suspended false ceiling with aluminium powder coated frame work (snap grid) of size 595 x 595 mm with runners with aluminium main T section 35x25x1.50 mm and cross T section 25x25x1.50 mm and aluminium angle 25x25x1.50 mm fixed along side of walls with wooden plug and hanging grid with adjustable J hook and 4 mm dia GI wire suspenders fixed to slab/truss including 12 mm thick mineral fibre insulation board/tiles of size 595 x 595 mm (Make - Armstrong or equivalent ) including taking down old false ceiling of any description complete all as specified and directed. |
| 61 | S&F in repairs for 12mm thk Plywood grade BWP, type BB fixed with screws/wooden adhesive to frame work/wall etc complete all as specified and directed. |
| 62 | Taking down carefully copper/aluminium point wiring (light,fan socket or power ) point complete,including fixtures and fittings such as switches, ceiling rose, pendents, regulators, sockets, tube light fitting,main switch,MCB and DB"s etccomplete all as specified anddirected. |
| 63 | M&L for point wiring complete using proper colour code 1100 Volts grade, 1.5 Sqmm, PVC insulated FRLS, ISI marked, single core unsheathed ( flexible0 multistranded copper conductor cablle confirming to IS 694, drawn through and including PVC conduit medium grade ISI marked with conduit accessories concealed in wall/ceiling/roof/column/ beam etc, sunk pressed steel terminal boxes ot less than 2 mm thick, 50 mm deep concealed in walls flush mountingwith 3mm thick ISI marked hylam laminated sheet top cover fixed with wall surface by means of chromium plated brass screws and washers including 1.5 Sqmm PVC INSULATED FRLS ISI marked single core unsheathed multistranded copper conductor cable green in colour as continous earth wire connected one end to metalic body of luminaries/ fans/socket/ceiling rose and other end to common earth dolly complete all as specified and directed for one light point / fan point controlled by one switch. |
| 64 | M&L for point wiring complete using proper colour code 1100 Volts grade, 1.5 Sqmm, PVC insulated FRLS, ISI marked, single core unsheathed ( flexible0 multistranded copper conductor cablle confirming to IS 694, drawn through and including PVC conduit medium grade ISI marked with conduit accessories concealed in wall/ceiling/roof/column/ beam etc, sunk pressed steel terminal boxes ot less than 2 mm thick, 50 mm deep concealed in walls flush mountingwith 3mm thick ISI marked hylam laminated sheet top cover fixed with wall surface by means of chromium plated brass screws and washers including 1.5 Sqmm PVC INSULATED FRLS ISI marked single core unsheathed multistranded copper conductor cable green in colour as continous earth wire connected one end to metalic body of luminaries/ fans/socket/ceiling rose and other end to common earth dolly complete all as specified and directed for one 5 pin 6 amps socket point controlled by one 6 amps switch on independent board . |
| 65 | M&L for point wiring complete using proper colour code 1100 Volts grade, 1.5 Sqmm, PVC insulated FRLS, ISI marked, single core unsheathed ( flexible0 multistranded copper conductor cablle confirming to IS 694, drawn through and including PVC conduit medium grade ISI marked with conduit accessories concealed in wall/ceiling/roof/column/ beam etc, sunk pressed steel terminal boxes ot less than 2 mm thick, 50 mm deep concealed in walls flush mountingwith 3mm thick ISI marked hylam laminated sheet top cover fixed with wall surface by means of chromium plated brass screws and washers including 1.5 Sqmm PVC INSULATED FRLS ISI marked single core unsheathed multistranded copper conductor cable green in colour as continous earth wire connected one end to metalic body of luminaries/ fans/socket/ceiling rose and other end to common earth dolly complete all as specified and directed for one 5 pin 6 amps socket point controlled by one 6 amps switch on same board . |
| 66 | All as per item No.65 above, but point wiring with 2.5 Sqmm and earth conductor of size 2.5 Sqmm complete all as specified and directed for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switchon independent board. |
| 67 | Supply & fixing modular type switch 6 Amps ,1way,1 module. |
| 68 | Supply & fixing modular type switch 16 Amps ,1way,1 module . |
| 69 | Supply & fixing modular type socket 6 Amps, 2/3 Pin combined 2 module . |
| 70 | Supply & fixing modular type socket 6 A/16 Amps, 6 Pin combined 2 module. |
| 71 | Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body |
| 72 | Supply &fix modular type fan regulator stepped type 120 W- 2 module. |
| 73 | Supply & fix in repair recess mounting high lumen LED slim panel 2"X2" 36Watt, white powder coated CRCA housing with highpower LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver,LED strip,connector block etc.and necessaryfixing arrangementat any height and removing old unserviceable item complete all as specified and directed. |
| 74 | Supply & fix MCB DP 40 Amps 10 KA,"C" series complete all as specified and directed. |
| 75 | Material and labour for submain wiring using proper colour code with two runs of single core, 1100 volts grade PVC insulated FRLS, ISI marked, unsheathed (flexible) multistaranded copper conductor cable of size 2.5 Sqmm and one run of single core, 1100 volts grade, PVC insulated FRLS, ISI marked unsheathed (flexible) multistranded copper conductor of same size drawn through and including PVC conduit medium grade ISI marked with conduit accessories concealed in wall/ceiling/roof/column/beam etc complete all as specified and directed. |
| 76 | Material and labour for submain wiring using proper colour code with two runs of single core, 1100 volts grade PVC insulated FRLS, ISI marked, unsheathed (flexible) multistaranded copper conductor cable of size 4 Sqmm and one run of single core, 1100 volts grade, PVC insulated FRLS, ISI marked unsheathed (flexible) multistranded copper conductor of same sizedrawn through and including PVC conduit medium grade ISI marked with conduit accessories concealed in wall/ceiling/roof/column/beam etc complete all as specified and directed. |
| 77 | Taking down and refixing of ceiling fan 1200mm sweep to 1400mm sweep of any make from its existing position after disconnecting of electric connection for carrying out repairs including servicing, overhauling, greasing etc after cleaning the body capacitor, holder, terminal adoptor, scwrews nuts and washers etc replacement of spare parts/accessories such as ball bearings, gun metal bushe, capacito, conopy top and bottom shackle clip assembly, rewinding of fan motor, painting andincluding hanging / fixingback in existing location and making cable connections and testing for its satisfactory performance complete all as specified and directed. |
| 78 | Supply and fix down rodmade of MS pipe mediun grade 15mm dia of 60cm long duly predrilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan complete all as specified and directed. |
| 79 | Taking out split type AC of capacity 1.5/ 2.0 TR, opening of the same and checking/ detecting the fault and carrying out necessary repair and replacement of unserviceable spares/ parts as required to make it operational, reassembling and refixing the unit to its position complete all as specified and directed. |
| 80 | Supply and fix of metalclad plug and socket concealed in wallwith MCB SP 32 Amps, 10KA C "series,240 VoltS Complete all as specified and directed. |
| 81 | Materialand labour for point wiring complete with 1.5 Sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed,multistranded,single core, copperconductor cable 1100 volts grade colour code cablesdrawnthroughand including PVC casing and caping of size 20 mm widthoraboveas required at site with all accessories such as Tee ,Corner, overlaping connector etc.along the suface of walls/roofs/ ceilings/floors etc including concealed PVC box for fixing of and including modular plate as per no of switch modules flush mounted suitable for fixing modularswitches , sockets,fan regulators etc.including modular plate coverof required size with necessarystainless steel cadmium platedscrews andincluding 1.5 Sqmm PVC insulated, multistranded, FRLS type,unsheathed(Green colour),single core, copper conductor cable as earth continuity conductor andconnecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and directedfor one light point / fan point controlled by one switch. |
| 82 | Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 83 | Supply and fix in repair, factory made, sheet metal enclosure, singledoor, 240 volts, AC,SPN, vertical distribution board, 2 way, painted with epoxy based powder coated suitable for mountingMCB as incomer of rating upto 40Amps, FP, 16-36 KA and MCB SP /TP as outgoings and complete withand including 200 amps rated copper busbar, neutral bar,earth bar, connecting cable links with and including top and bottom removable gland plate, complete withIP 43 protection,all as specified and as directed. |
| 84 | Supply & fix for MCB SP 6 to 32 Amps 10 KA,"C" seriescomplete all as specified and directed. |
| 85 | Material and labour for submain wiring along with earth wire using 2 X 4.0 sq mm(colour coading) + 1X4 sqmm earth wire(green colour) of single core PVC insulatedmultistranded copper conductor1100 Volts grade FRLS type in and including PVC casing capingcompleteall as specified |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
