|
| 1 | PART A : PLATFORM |
| 2 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches ordrains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.0 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 4 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall : 32 mm nominal outer dia Pipes |
| 5 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 32 mm nominal outer dia Pipes |
| 6 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. : 32 mm nominal outer dia Pipes |
| 7 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. : 25 mm nominal outer dia Pipes |
| 8 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 9 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore . |
| 10 | Providing and fixing 1st quality ceramic glazed walltiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting , risers of steps and dados, over 12 mm thick bed of cement mortar 1: 3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. |
| 12 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 13 | Construction soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diametre and 1.20 m long complete as per standard design. |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 15 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 16 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster |
| 17 | PART B: STAGING OF WATER TANK |
| 18 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches ordrains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 19 | Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete. |
| 20 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) |
| 21 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) |
| 22 | Structural steel work in tubular framed work including cutting, welding, fixing in position all complete as per instruction of EIC (scrap drilling rods to be supplied departmentally). |
| 23 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 24 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 26 | PART C: DRILLING PORTION |
| 27 | Drilling in all kinds of soil and rockwith DTH rig Machinefor installation of hand pump with DTH rig machine all complete including supplying all materials, labour, tools, drilling rigs, air compressor and equipment as well as fuel, lubricants for making 125/115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and direction of EIC:Drilling upto 30 m depth below G.L |
| 28 | Drilling in all kinds of soil and rockwith DTH rig Machinefor installation of hand pump with DTH rig machine all complete including supplying all materials, labour, tools, drilling rigs, air compressor and equipment as well as fuel, lubricants for making 125/115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and direction of EIC:Drilling beyond 31 m below GL |
| 29 | Supplying all materials labour,equipments for lowering 125 mm dia blue UPVC Pipes as casting for protecting the sides from falling during the process of drilling all complete including carriage to work site. |
| 30 | Cost of 125 mm dia.Blue UPVC casing Pipe confirming to ISI latest revision is 12818/2016 CML No.5543459 |
| 31 | Supplying labour, cementand calcium chloride or bentonite solution and equipments for groutingthe casing pipe after lowering in the bore including carriage of materials to work site etc.all complete as per Specification and direction direction of EIC. |
| 32 | Supplying all tools,equipments and labour and doing washing, flushing and development of drilled tube well to give clean and clear water all complete as per direction of EIC |
| 33 | Supplying all tools,labour for fitting and fixing deep well cylinder with necessary connecting rod complete jobas per specification & direction of E/I. including carriage of materials. |
| 34 | Providing and lowering to proper levels Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, for tube well, complete as per direction of Engineer in Charge. 32 mm nominal outer dia Pipes. |
| 35 | Supplying all materials,labours and fixingIndia mark II Hand pump with all accessories all complete jobas per direction of E/I including carriage of materials. |
| 36 | Cost of 1 No.of standard ISI Marked deep wellHand pump for India Mark II confirming to ISI 15500(part2)/2004with latest revisionincluding 12mm x3 Mtr long8 Nos. of connecting rod.made of bright bar electro-galvanised fitted with coupler & normal stand assembly suitable for bore well dia 100 to 125 mm casing pipe. |
| 37 | Lettering with black Japan paint of approved brand and manufacture |
| 38 | PART D: SOLAR SUBMERSIBLE PUMP |
| 39 | Supply, installation, commissioning and successful testing of a 1HP capacity DC submersible Solar PV module poweredpump(lowered as per specified head), along with all accessories(PV Module, Mounting structures, DC Submersible pumpcontroller, Associated electrical cables, Earthing arrangement,Lightning protection etc.) to make it complete in all respect (withall safety features). |
| 40 | Total impact of GST for the purpose of CTC |
