Military Engineer Services-MES has published Tender For Special Repair To Bldg No. T-54 And T-55 Of Hq Chhattisgarh And Odisha Sub Area At Naya Raipur Military Station Under Age (I) Raipur. Submission Date for this Tender is 04-05-2024. Electrification Work Tenders in raipur Chhattisgarh. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| a9df776a-3a31-43cb-80a0-b1b3f3148352.html | Tender Notice | 0 KB |
| BOQ_727685.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| TENDERrpr.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | M&L for 80 mm thick rubber mould reflective surface PUcoated, factory made,coloured,pre-cast PCC interlocking paver blocks/ tiles conforming to IS 15658-2006, M-40 designation of section as approved by GE in hard standing, laid dry over complete all as specified & directed. |
| 2 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 3 | Taking down cement plaster etc on brick walls/ concrete (ceiling) surfaces of any descriptions including racking out joints, hacking for keys, scrubbing down with water and disposal of unserviceable materials to out side of MD land complete all as specified & directed. |
| 4 | Taking down Chowkhats or frame with shutter (w/o taking off shutter from the frame) area exc 1.50 sqm but n.exc 4 sqm each and removal complete all as specified & directed. |
| 5 | Taking down Chowkhats or frame with shutter (w/o taking off shutter from the frame) area n.exc 1.5 sqm each and removal complete all as specified & directed. |
| 6 | M&L for factory made 35 mm thick second class (Indian Sal, Bijasal, Hollock or Benteak) hardwoodplain, framed, panelled shutter (two or three panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stiles as per IS: 1003 (Part-I), kiln seasoned complete all as specified & directed. |
| 7 | M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 30mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed. |
| 8 | Supply & fix factory made solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet reinforced with MS square tube and edges painted to match with printed sheet complete all as specified & directed. Make:- Sintex or Rajshree as approved by GE. |
| 9 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed in frame complete all as specified & directed. Make:- Sintex or Rajshree as approved by GE. |
| 10 | S&F of Anodised aluminium Powder Coated frame(minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed. |
| 11 | S&F of Anodised Powder Coated aluminium door shutters (minimum thickness of powder coating 50 micron) , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified & directed. |
| 12 | S&F of Anodised aluminium powder coated of any colour (Thickness or powder coating not less than 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) etc. complete all as specified & directed. |
| 13 | S&F of galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples complete all as specified & directed. |
| 14 | S&F Door closer hydraulically regulated, designation No. 2, universal type of aluminium body fixed to door frame with screws or by welding suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed. Make:-Kelwyn or Amar as approved by GE. |
| 15 | S&F sheet glass, ordinary quality 4.0mm thick and glazing with oil putty/ beads in squares n. exc 0.5sqm in each pane complete all as specified & directed. Notes:- (i) Glazing in old work, serviceable beads as obtained from hacking out of sheet glass shall be re-used after cleaning/ rubbing the the same with sand paper, if required as per site. (ii) Glazing in new work, beads shall be supplied with joinery. |
| 16 | Supply & fix 300 mm long aluminium alloy, anodised sliding door bolts with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts & sliding bolts of extruded section or cast aluminium alloy complete all as specified & directed. |
| 17 | Supplying & fixing 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 18 | Supplying & fixing 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed. |
| 19 | Supplying & fixing aluminium handles 150 mm size, cast type, anodised complete all as specified & directed. |
| 20 | M&L for mild steel work conforming to Fe-290 Gde -165 as in nosing to steps including embedingin concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified and directed. |
| 21 | M&L for rolled mild steel sections conforming to Fe- 410-W (Gde E-250) quality-A as in roof trusses (framed), main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates etc complete all as specified & directed. |
| 22 | M&L for scratch free light shade vitrified floor tiles, minimum 10mm thick (square/ rectangular),double charged, area of each tile not exc 0.36 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified & directed. |
| 23 | M&L for non-skid white ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exc 0.06Sqm but not exc 0.11Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified & directed. |
| 24 | M&L for glazedceramic white tiles 350x250x7mm or 450x350x7mm thick as approved by GE on vertical surfaces such as skirting/ dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified & directed. |
| 25 | M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection finished even and smooth without using extra cementcomplete all as specified and directed. |
| 26 | M&L 40 mm thick PCC (1:2:4) type B0 (12.50 mm graded stone agg) as in floor finished even and fair without using extra cement complete all as specified and directed. |
| 27 | M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, filling, mass concrete and sub base of floors, path/ paving etc complete all as specified & directed. |
| 28 | M&L for 10 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed. |
| 29 | M&L for mils steel galvanised powder coated T-grid frame work of make as approved by GE for suspended false ceiling with size of grid 600 x 600mm consisting of main tee/ runner of size 35 x 25 x 1.3 mm, cross tee of size 25 x 25 x 1.3 mm and wall angle of size 25 x 25x 1.5 mm suspended @ 1.2M c/c both way with and including 4mm dia GI wire with J hook, nuts/bolts, butterfly clips, soffit cleat/ rawl plug etc as per manufacturer"s instructions and 4 mm thick pre-primed, self embossed, textured designer, water & termite resistant calcium silicate boards for insulation complete all as specified and directed. Make: Armstrong or Ramco Industries or equivalent brand of other Make as approved by GE from list of makes attached with tender documents. |
| 30 | M&L for 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination as in timber frame work, rebated or flat edged; fixed with & including suitable size clamps, glue & screws etc as required at site complete all as specified & directed. |
| 31 | M&L for preparing new plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 32 | M&L for preparation of new surfaces of iron/ steel of any description over 10 cm width or girth and applying two coat of synthetic enamel paint of colour as approved by GE over and including a coat of red-oxide primer complete all as specified & directed. |
| 33 | M&L for preparation of old painted surfaces of iron/ steel of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of colour as approved by GE over complete all as specified & directed. |
| 34 | S&F curtain rod fancy type, made out of 25mm dia MS pipe having wall thickness 0.63mm bright finish, colour and pattern as approved by GE, over all dia 28-29mm complete all as specified and directed. |
| 35 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 36 | Dismantling of water tank of any description of capacity exc. 500 litres but not exc. 1000 litres, removing to store or from the site complete all as specified and as directed. |
| 37 | Supply and fix 1000 ltrs capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed. Make:- Sintex or Tuff or JS Poly Plast or Dhara as approved by GE. |
| 38 | Supply and fix in repairs, 15mm dia stop valves/ angle cock, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions complete all as specified & directed. Make:- Marc or Zoloto or Plumber or Gem or Seiko or Prayag polymer Pvt Ltd or equivalent brand of other Make as approved by GE from list of makes attached with tender documents. |
| 39 | S&F in repairs, 15mm dia bib cock,cast copper alloy with crutch or butterfly handle,fancy type, chromium plated, screwed down for iron pipe or brass ferrule complete all as specified & directed. Make:- Marc or Zoloto or Plumber or Gem or Seiko or Prayag polymer Pvt Ltd or equivalent brand of other Make as approved by GE from list of makes attached with tender documents. |
| 40 | Supply and fixing in repair of pillar taps, cast copper alloy with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm dia complete complete all as specified & directed. Make:- Marc or Zoloto or Plumber or Gem or Seiko or Prayag polymer Pvt Ltd or equivalent brand of other Make as approved by GE from list of makes attached with tender documents. |
| 41 | S&F toilet paper holder of brass, chromium plated, fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 42 | Supply & fix vitreous china white WHB (550 x 400 mm) flat back with CP waste coupling, waste pipe, brackets including cutting for and pinning in ends of brackets complete all as specified and directed. Make:- CERA or PARRYWARE or HINDWARE or equivalent brand of other Make as approved by GE from list of makes attached with tender documents. |
| 43 | Supply & fix soap dish of PVC rawal plugs with screw disc wall mounted (oval) type,including all necessary screws of same finish of pattern & make as approved by GE complete all as specified and directed. |
| 44 | Supply & fix bevelled edge mirror of 6.0mm thick selected quality glass, 600 x 450 mm size, mounted on 6 mm thick AC building board or commercial plywood with aluminium angle bead alround the mirror and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified & directed. |
| 45 | Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) but plastic water closet seat, black/ white, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hinging device, complete all as specified & directed. Make:- CERA or PARRYWARE or HINDWARE or equivalent brand of other Make as approved by GE from list of makes attached with tender documents. |
| 46 | Supply and fix in repair10 ltr capacity PVC valve less syphonic action type flushing cistern low level "white" with inlet ball valve, float valve & handle Including 32mm bore PVC flush pipe & brackets and brackets fixed to wall complete all as specified & directed. Make:- CERA or PARRYWARE or HINDWARE or equivalent brand of other Make as approved by GE from list of makes attached with tender documents. |
| 47 | Supply and fixing of 15mm bore PVC connection pipe 450 mm long with PTMT nuts complete all as specified & directed. |
| 48 | Supply and fix in repair 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floor with & including necessary clamps of requird size etc complete all as specifed & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE. |
| 49 | Supply and fix in repair 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floorwith & including necessary clamps of requird size etc complete all as specifed & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE. |
| 50 | Supply and fix 110mm bore PVC (SWR) bends of any radius provided with access door complete all as specified & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE. |
| 51 | Supply and fix 75mm bore PVC (SWR) bends of any radius provided with access door complete all as specified & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE. |
| 52 | Supply and fix 110mm bore PVC (SWR) door bends of any radius provided with access door complete all as specified & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE. |
| 53 | Supply and fix 110 mm bore PVC (SWR) vent cowl complete all as specified & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE. |
| 54 | Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 15mm bore of pipe complete all as specified and as directed. |
| 55 | Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 20mm bore of pipe complete all as specified and as directed. |
| 56 | Supply & fix 15 mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified & directed. |
| 57 | Supply & fix 20 mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified & directed. |
| 58 | S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 59 | S&F in repairs grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified & directed. Make:- PRAYAG SYMET/ COMMANDER or equivalent brand of other Make as approved by GE from list of makes attached with tender documents. |
| 60 | S&F brass chromiumplated anodised tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed. |
| 61 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering and ridge complete all as specified and as directed. |
| 62 | Supply and fix pre-painted galvalume aluminium zinc coating GI based 0.50mm thick (AZ-150) corrugated steel sheet of any colour having minimum tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/ L or J type or cranked hook/ bolts as complete all as specified & directed. |
| 63 | S&F of 0.8 mm thick Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified & directed. |
| 64 | Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cms thickness (below or above ground level) including removal of debrise to out side MD land complete all as specified & directed. |
| 65 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris to out side MD land complete all as specified & directed. |
| 66 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.. |
| 67 | Taking down carefully copper/aluminium point wiring on batten/ PVCconduit (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, sockets, light fittings etc, including removal and making good disturbed surfaces of walls, ceilings etc as per existing complete all as specified & directed. |
| 68 | M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/ regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one light/ fan/ exhaust fan/ bell point controlled by one no one way piano type switch 5/6 Amps complete all as specified & directed. |
| 69 | Description same as per Item No. 67 but one light point controlled by two way switch. |
| 70 | M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copperconductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket out let 3/5 pin, 5/6 Amps controlled by one no one way piano type switch on the same board with other switches complete all as specified & directed. |
| 71 | M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket out let 3/5 pin, 5/6 Amps controlled by one no one way piano type switch on independent board but not below the switch board of light points in same vertical plane complete all as specified & directed. |
| 72 | M&L for point wiring concealed type with 4.0 sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 2.5 sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket out let 3/6 pin, 15/16 Amps controlled by one no one way piano type switch on independent board complete all as specified & directed. |
| 73 | Supply & fix modular switch one way 6 Amps, 01 module complete all as specified & directed. |
| 74 | Supply & fix modular switch two way 6 Amps, 01 module complete all as specified & directed. |
| 75 | Supply & fix modular switch one way 16 Amps, 01 module complete all as specified & directed. |
| 76 | Supply & fix modular socket6 Amp, 2/3 pin combined, 02 module complete all as specified & directed. |
| 77 | Supply & fix modular socket6/16 Amp, 2/3 pin combined, 02 module complete all as specified & directed. |
| 78 | Supply & fix moduler type, rotory stepped type electronic fan regulator 2 module mini flush type 100/120 W, 240 Volts-50Hz complete all as specified & directed. |
| 79 | Supply & fix white cover plate with frame, 1/2 module including metal flush box 1/2 module complete all as specified & directed. |
| 80 | Supply & fix white cover plate with frame, 03 module including metal flush box 03 module complete all as specified & directed. |
| 81 | Supply & fix white cover plate with frame, 04 module including metal flush box 04 module complete all as specified & directed. |
| 82 | Supply & fix white cover plate with frame, 06 module including metal flush box 06 module complete all as specified & directed. |
| 83 | Supply & fix white cover plate with frame, 08 module complete all as specified & directed. |
| 84 | Supply & fix modular metal flush box 08 module complete all as specified & directed. |
| 85 | Supply & fix ceiling rose, surface bakelite, 65x50mm surface type, two to three terminals, AC 240 volts complete all as specified & directed. |
| 86 | Supply and fixMCB DB, 4 way double door sheet metal enclosure tripple pole and neutral, IP 43-IK 09 with metal door, 415 volts with copper bus bar of 200A suitable for fixing MCBs, Isolators etc including taking down old complete all as specified and directed. |
| 87 | Supply and fixMCB DB, 8 way double door sheet metal enclosure single pole and neutral, IP 43-IK 09 with metal door, 240 volts with copper bus bar of 200A suitable for fixing MCBs, Isolators etc including taking down old complete all as specified and directed. |
| 88 | Supply and fixSPN DB, 4 way double door sheet metal enclosure single pole and neutral, IP 43-IK 09 with metal door, 240 volts with copper bus bar of 200A suitable for fixing MCBs, Isolators etc including taking down old complete all as specified and directed. |
| 89 | M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC conduit medium grade ISI marked not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 6.0sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed. Notes:- (i) Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit and its accessories shall be measured and paid one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles. (iii) Colour coding for wiring/ bus bar/ main connection shall be followed . |
| 90 | Supply & fix MCB TPN , 63 Amps, "C" series, 240 volts, 50Hz, 10kA complete all as specified & directed. Make:- ABB/ Legrand/ Siemens/ L&T/ Havells as approved by GE. |
| 91 | Supply & fix MCB SP, 6 to 32 Amps, "C" series, 240 volts, 50Hz, 10kA complete all as specified & directed. Make:- ABB/ Legrand/ Siemens/ L&T/ Havells as approved by GE. |
| 92 | Supply & fix MCB SPN, 40 Amps,"C" series, 240 volts, 50Hz, 10kA complete all as specified & directed. Make:- Legrand / L&T/ Havells/ ABB as approved by GE. |
| 93 | Supply and fixing of Rigid non-metallic PVC conduit of 25 mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock ,nuts, saddles, pipe hooks etc. complete all as specified & directed. |
| 94 | Supply and fixing of Junction boxes (1 to 4 way) of 25 mm dia complete all as specified & directed. |
| 95 | Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed. |
| 96 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed. |
| 97 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. complete all as specified & directed. |
| 98 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified & directed. |
| 99 | Taking down of existing exhaust/ ceiling fan of any size/ sweep for keeping the safe cosdoy and re-fixing/ re-hanging the same after repair work or as directed and connecting up the same with & including twin twisted copper flexible wire from ceiling rose to exhaust/ ceiling fan complete all as specified & directed. |
| 100 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified & directed. |
| 101 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm and old exhaust fan to be deposited in MES store yard complete all as specified and as directed. |
| 102 | Supply and fix Modular TV socket 01 modulecomplete all as specified and as directed. |
| 103 | Supply and fix of modular telephone jack with shutter 01 module complete all as specified and as directed. |
| 104 | M&L for earthing complete with galvansided steel earth plate electrode 600x600x6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron wire 4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 15mm bore GI pipe medium grade including necessary fittings for protection of earthing wire, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS deformed bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth wire alongwith protection pipe and testing on completion complete all as specified and directed. Note:- GI wire and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor. |
| 105 | Supplying and fixing/ laying of 40mm bore dia GI pipe light grade in trenches/ under roads/ along pole/ wall including all necessary fittings & clamps made out of 25x3mm flat iron as required for cable protection etccomplete all as specified and directed. |
| 106 | Supply and laying or fixing or passing in trenches/ on pole/ through pipes,1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 25sqmm, 4core including jointing materials such as cable glands & lugs etc and testing on completion complete all as directed. Make:- Havells or Finolex or Gloster or Plaza or Universal as approved by GE. |
| 107 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/ loose soil complete all as specified and directed. |
| 108 | Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed. |
| 109 | Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 110 | Supply and spreading clean and dry fine sand free from sharp materials (unwashed) laying in trenches around the cable for cushioning in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness complete all as specified and as directed. |
| 111 | Supply and laying un-reinforced precast concrete cable cover, class LV, type1 , Flat, size 250mmx150mmx40mm laid in trenches for underground cable complete all as specified and directed. |
| 112 | Schedule of credit amount of Rs. 72,042.00 to be deducted during AOC |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
