Military Engineer Services-MES has published Tender For Spl Repair To Roof Of Bldg No T-36 Swimming Bath,T-36 C1-Dressing Shed For Gents, T36 C2 - Bath Cubicals, T-36 C3- Dressing Shed For Ladies, Provn Of Security Wall Near Building No P-01 Gd Post And Provn Of Refrigerator And Deepfreezer Fo. Submission Date for this Tender is 02-05-2024. Refrigerators Tenders in pulgaon Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 26-Apr-2024 | corrigendum No.01 | BOQ | 02-05-2024 |
| FileName | File Description | File Size |
| a0e2eb95-4915-4b70-95ef-5de8c9d19de9.html | Tender Notice | 0 KB |
| BOQ_727674.xls | Tender Document | 0 KB |
| tenderdocuments8120.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified |
| 2 | S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel crimple sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified |
| 3 | S & F pre-painted galvalume aluminum zinc coating GI based Plain/corrugayed crimple steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 4 | Dismantling for unframed timber scantling fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section for complete all as specified and as directed by EIC. |
| 5 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified. |
| 6 | Supply & Fixing Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts,if required: hooks (stay),heavy,for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securingpurlinstowood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165complete all as specified & directed by EIC. |
| 7 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto1.5m clear span,cills,steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering,slightly rounded or chamfered angles and throating, as directe incuding necessary formwork requiredcomplete all as specified and as directed by EIC. |
| 8 | M&L for preparing new or previously untreated surfaces, of steel and iron work of any description not otherwise described exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primerall as specified and as directed. |
| 9 | M&L for old steel and iron paintedSurfaces of any description, over 10cm in width or girth,not otherwise described two coats of synthetic enamel paint all as specified and as directed. |
| 10 | M&L 8mm thick designer ceiling board (Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instructions, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33mm thick galvanized steel sheet & of size T 24x32mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed pipe or wall plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 22x22mm of white colour all as per instruction complete all as specified and as directed. |
| 11 | S&F for Stainless steel ladder grade 304 WATERTECH SYSTEMS Weight Capability Swimming Pool Heavy Duty 5-Step Stainless Steel Pool Step Ladder with Easy Mount Legs (Silver) including raised railing above water level upto landing 3 feet high above FFL complete all as specified and directed. |
| 12 | S& F Stainless Steel sections grade 304 in railing complete all asspecified and directed |
| 13 | Demolition of PCC in ground floor or paving n.exc 15 cm thick above or below ground level. |
| 14 | M&L for 75mm thickPCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection ,finished fair and even, without using extra cement.complete |
| 15 | M&L 100 mm thickPCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub bases/floors/pavings etc complete all as specified and as directed. |
| 16 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premishes. |
| 17 | M&L joint free non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 18 | M&L for swimming pool designer mosaics tiles 20mmX20mmX4mm thick with joint gaps 2mm with sheet laid over adhesive 1.5mm to 2mm thick adhesive and all tiles joint filling shall be done with cementatious modified grout mortar including necessary adhesive and cementartious grout work in floor and wall surfaces as recommended by the manufacturer complete all as specified and as directed. |
| 19 | Material and labourfor 25 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as under floor tiles finished the surface even and fair complete all as specified and as directed by Engineer-In-Charge. |
| 20 | M&L for Glazed coloured ceramic tiles in vertical surface 300x 600x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement tomatch dado/ skirting including rendering 10mm thick in CM 1:3on fair faces of wall surfaces etc, all as specified and as directed. |
| 21 | M&L in repair for Granite 18-22mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified. |
| 22 | M&L for light/dark shade endura vitrified tiles 10 mm thick, area of each tiles exceeding 0.11 sqm but not exceeding 0.38 sqm including15mm thick screed bed or bedding layer in CM 1:4 includingeach as in floor/ path/ hardstanding incl dismantling all as specified and as directed. |
| 23 | M&L for light/dark shade rubberized flooring anti slip tiles area of each tiles exceeding 0.11 sqm but not exceeding 0.38 sqm with square edge, interlocking etc including20mm thick screed bed/plaserered surface or bedding layer in CM 1:4, all as per manufacturer instructions and complete all as specified and directed. |
| 24 | M&L glozy finish 60mm thick machine pressed precast interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of M35 grade including 50mm thick sand cushion complete all as specified. |
| 25 | M&L for Chequred cement concrete coloured tiles with glozy finish painted surface size 300 mm x 300 m x 22-25 mm thick laid over and including 15 mm thick cement mortar screed/plaster in CM 1:6 as in floors and steps etc complete all as specified and directed. |
| 26 | Demolition of brick /stone masonary built in cement mortar including all quoins arches, pillars and precast concrete articles all as specified and as directed. |
| 27 | M&L forBrick work with fly ash bricks straight or curved on plan exc 6m in radius but built in 1:6 cement mortar complete all as specified and as directed. |
| 28 | M and L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed. |
| 29 | M&L in repair 38mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as under floor tiles finished the surface even and fair complete all as specified and as directed. |
| 30 | Taking down of chowkhats or frames not exc 1.5 sqm each (without taking off shutters from the frame)complete. |
| 31 | Taking down chowkats or frames with shutters (without taking off shutters) of any description exc 1.50 Sqm but n.exc 4 Sqm each all as specified and directed. |
| 32 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing |
| 33 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 34 | Supply & Fixing 100mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed. |
| 35 | Supply & Fixing 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by EIC. |
| 36 | Supply & Fixing 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed by EIC. |
| 37 | S& F in repairsAluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips of sheet cast or extruded sections and fixing bolt or cast aluminium alloy& fixed complete all as specified. |
| 38 | S& F3.50mm thick sheet figured glass, pin headed typeand glazing with oil putty in squaresnot exceeding 0.50 sqm in each pane complete all as specified and as directed. |
| 39 | Supply & fixing repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staplescompleteall as specified. |
| 40 | S&F in repairs 20mm dia bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etc incl taking down GI Pipe complete all as specified and as directed. |
| 41 | S&F in repairs 15mm dia bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etcincl taking down GI Pipecomplete all as specified and as directed by Engineer-in-Charge. |
| 42 | S&F for Gun-metal, globe or gate valves 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed |
| 43 | S&Fin repairs rotational moulded polythylene water storage tanks 1000 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed by Engineer-in-Charge |
| 44 | S & Fixed in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 210 gms,complete all as specified and directed by Engineer-in-Charge |
| 45 | S&F in repairs, 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with in let, ball valve float and handle, PVC flush pipe, brackets etc including taking down unserviceable flushing cistern etc, complete all as specified and as directed by Engineer-in-Charge. |
| 46 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white including connection to trap and to flushing pipe, anti syphonge pipe etc, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging deviceincluding making good the floor complete all as specified and as directed. |
| 47 | S&F in repairs PTMT gratings 125mm dia, complete all as specified and as directed by Engineer-in-Charge |
| 48 | S&F in repairs vitreous china wash basin white of size 550x400 mm with padestal stand (ISI marked) including 32 mm CP waste coupling & PVC flexible waste pipe of min 90 cm long,flat back or angle back type including CP pillar taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete fixed in repairs all as specified and directed. |
| 49 | S&F in repair stop valves15mm dia bore of cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for union and fixed. |
| 50 | S&F repairs PVC connection15mm size with CP brass Nutsof length 450mm complete all as specified and as directed by Engineer-in-Charge |
| 51 | S&F in repairsAluminium anodised chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed by Engineer-in-Charge. |
| 52 | S&F in repairs PTMT towel rings fixed with and including plated brass screws and wooden/plastic cleats (minimum weight 90 gms) complete all as specified and as directed. |
| 53 | S&F in repairs Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge |
| 54 | S&F in repair Chromium plated shower roses 125mm dia with or without swivel joints, any size, including fixing to steel pipe or union |
| 55 | S&F in repair stainless steel peg stays 6 sreioes hooks, plated brass screws and wooden/plastic cleats complete all as specified and as directed |
| 56 | M&L for Mild steel TMTbars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified. |
| 57 | M&L mild steel 6 to 8mm mm dia TMT bars as in stirrups, spacers and binders, bend to shape required, incl cranking bending spirally for hooking for column, hooking ends and binding with 0.9 mm dia annealed wire confirming to ISI. |
| 58 | M&L for form work to sides of concrete foundation, footing, bases of columns, plinth beams and similar work, vertical or to batten rough finish flat surfaces on concrete complete all as specified and directed. |
| 59 | M&L for reinforced cement concrete type B-1 1:2:4 (using 20mm graded stone aggregate) as a Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like incl Demolition of Concrete of any description andin any position not otherwise specifically provided for if cement concrete is reinforced (reinforcement cutas required to facilitate demolition) complete all as specified |
| 60 | Taking down cement plaster/terrazzo finish on wall of any description hacking for key scrubbing down with water including racking out joints. |
| 61 | M & L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement. |
| 62 | S&F for Chicken mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling with nails and cement slurry complete all as specified and directed. |
| 63 | M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair without using extra cement. |
| 64 | M&L for preparingsurface of wall priming plastered and other surfaces with one coat wall care putty priming paint over two coat of Oil bond Distermper complete all as specified. |
| 65 | M&L for preparingsurface of wall and applying two coat of cement base paint over a coat of white cement primer complete all as specified. |
| 66 | M&L Complete removal of existing treatment on old surfaces on walls and applying two coats of distermpering on walls with distemper oil emulsion over aonecoat of wall care putty complete all as specified |
| 67 | M & L Complete removal of existing treatment on old surfaces and applying two coats of Weather coat paint over a coat ofwhite cement primerincluding preparation of old surfacescomplete all as specified and directed. |
| 68 | Cleaning of sewage line and connected Manholesany length from WC to Manhole, manhole to manhole, manhole to septic tank septic tank to soakwell by roding and well flushing after cleaning and removing mud etc to in pits complete all as specified and directed by Engr-in-Charge. |
| 69 | 100 mm bore dia of pipe |
| 70 | 150 mm bore dia of pipes |
| 71 | M&L PCC 1:4:8 type D2 (using 40 mm graded aggregade ) in foundation filling and mass concrete complete all as specified and as directed. |
| 72 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly heartedbuilt in CM 1 : 6, except stones, obtained from demoltion of stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc complete all as specified and as directed. Note : Work to be carried out in ornamental /architectural manner |
| 73 | M&L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses CM 1:4 complete all as specified and as directed. Note : Work to be carried out in ornamental /architectural manner |
| 74 | M&L for 15mm thick rendering in two coats on stone/ brick/ concrete surfaces (external)finished even and smooth without using extra cement etc. 1st coat 10 mm thick in CM 1:6and 2nd coat 5mm thick in CM 1:4 mix with water proofing compound as per manufacturer instructionscomplete all as specified and as directed. Note : WPC shall measured and paid Seprately Note : Work to be carried out in ornamental /architectural manner |
| 75 | Supply only Integral water proofing Compound complete all as specified and as directed. |
| 76 | M&L for RCC nominal mix type B1 1:2:4 (20mm graded aggregate) as in Columns, Slabs, Soffits, Beams, Chajjas,Arches complete all as specified and as directed. NOTE : Specialised Work to be carried out in ornamental /architectural manner |
| 77 | M&L for Formwork to flat surfaces to sides of concrete for Columns, Slabs, Soffits, Beams, Chajjas, Arches with fair finish of concrete complete all as specified and as directed. Note : Work to be carried out in ornamental /architectural manner |
| 78 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified. |
| 79 | Taking down carefully aluminium/ copper point wiring on batten or in PVC conduit or in MS conduit with wire etc (for light, fan, socket or power) complete including fixture nad fitting such as switches, ceiling roses, pendents, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good the distributed surfaces of walls, Floors, ceilings etc. |
| 80 | Taking down carefully exisitng wooden board, Main switch, MCB DB boxes, TPN boxes, cut uot, etc of any size any capacity from boards complete all as specified and as directed. |
| 81 | Taking down carefully sub main wiring/service connection twin core from wall/ LT pole of any size of Aluminium with wooden batten and or through rigid conduit including GI wire and making good the distrubed surfaces of walls, roofs, floors etc complete all as specified and as directed. Note: For item No 1 to 3 :- All the materials obtained from taking down against item No 1 to 3 shall be recorded in MB duly signed by Engineer-in-Charge and contractor at site as actually obtained by giving details of each items. |
| 82 | M& L for point wiring one light point controlled by one switch with PVC insulated and unsheathed, flame retardant Low smoke (FRLS) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with stranded copper conductor single core in and including rigid PVC surface conduit not less than 19 mm dia, clip, with suitable MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminimum paint from in side including earth dolly with 3 mm thick plastic laminated sheet top cover of approved colours including 1.50 sqmm green stranded copper conductor as continuous earth wire with all accessories including lugs required, complete all as specified an as directed. |
| 83 | All as per Srl item No 83 above but one fan/ Exhaust fan point controlled by one switch & regulator -do- |
| 84 | All as per Srl item No 4 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on same board -do- |
| 85 | Description all as per item No 4 above but for power point using 4 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low smoke (FRLS) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed. |
| 86 | S&F switch piano (Penta PC) flush button type 5 Amp single pole one way complete all as specified and as directed. |
| 87 | S&F socket outlet 2 in 1, 3 pin, 5 Amp (Penta PC) flush type complete all asspecified and as directed. |
| 88 | S&F switch piano (Penta PC) flush button type 15 Amp single pole one way complete all as specified and as direced. |
| 89 | S&F socket outlet 2 in 1, 3 pin, 5 Amp and 15 Amp (Penta PC) flush type complete all as specified and as directed. |
| 90 | S&F ceiling rose, surface bakelite 65 x 50mm three terminals complete all as specified and as directed. |
| 91 | S& F Lamp holder, PVC,/Urea type with back plate suitable for batten fittins complete all as specified as directed. |
| 92 | S & F 9/10W LED retrofit lamp holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. |
| 93 | S& F for sub main wiring with PVC insulated, unsheathed flame retardant Low Smoke (FRLS) 2 single core cable 1100 volts grade with copper conductor of size 4.0 sqmm (Nominal area) multi stranded drawn into steel conduit (Existing/ new) with and including 2.5 sqmm green stranded copper condutor as contineous earthwire with lugs complete all as specified and as directed. Note : New conduit and conduit accossoreies shall be measured seperately. |
| 94 | S& F in replacement of MCB DB SPN, 4 way 240 volt, double door type MCB DB suitable for mounting incoming and outgoing MCBs double pole/ single pole complete all as specified and directedc |
| 95 | S&F MCB single pole and neutral 32 Amp 240 V, 10KA, "C" series, complete all as specified and as directed with copper lugs. |
| 96 | S&F MCB single pole 6 to 32 Amps 240 V, 10KA, "B" series, complete all as specified and as directed with copper lugs. |
| 97 | Supply, installation, Testing commissioning of under water LED lights (water proof) wall mounted suitable for 12V supply with Driver flexible cable all as specified and directed. |
| 98 | S& F GI pipe 40 mm bore light grade laid under plinth, ground or fixed along walls for protection of cables compete including necessary fixing arrangements such as MS clamps/ hooks, nuts, bolts, washers complete all as specified and directd. |
| 99 | Taking down lod rusted galvanized iron pipe and providing galvanized pipe 40 mm bore light grade in trenches/ road/ nallah or fixed along wall/ pole including mild steel clamps, screws etc, complete all as specified and directed. |
| 100 | S&F in repair 35/37 W LED flood light 6000K exclusive innovative designed, long life versatile pressure dia-cast aluminium IP 65 light luminaire with gigh power LED as light souce incl wiring up[to and terminating into existing ceiling rose compete all as specified and as directed. |
| 101 | Supplying, transporting, erecting and fixing Steel tubular swaged poles type 410 SP-31, 9.00 metre long, swan neck type complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified including painting with two coats of aluminium paint over one coat of red oxide primer and 06 Nos bands/ straps with white and red post office box colour (30cm wide each) synthetic enamel paint at a distance 30 cm from plinth block and numbering of poles with black synthetic enamel paint in 2.5cm height including tarring one coat on steel surface embedded in concrete foundation with and including necessory excavation & earth work and PCC in foundation/ Plinth block complete all as specified, shown on drawing and directed. |
| 102 | M&L for earthing complete with galvanised steel earht plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 3.0 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check uts & washers of galvanized iron or steel, procteded by GI pipe 15 mm bore (light grade) and watering pipe 20 mm bore GI pipe (light grade) and chambe of pcc 1:4:8 type D2 using 40mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20 mm graded stone agg. 50mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80mm c/c both ways including excavation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of switches, DBs) complete all as specified &testing on completion. Note:- (i) Item includes the cost of 7.5mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earhth pit itself and the extra cost of additional length of wateing pipe, bends, elbow etc shall be deemed included in the unit rare. |
| 103 | Supply and Fixing Deep freezer, single phase AC 230 Volts, 50 Hz (BEE certrified) with star rating with sliding glass top, single door having nominal storage capacity of 320 ltrs |
| 104 | Supply and fixing refrigerator, single phase AC 230 volts, 50 Hz (BEE certified) with star rating having nominal storage capacity of 185 ltrs with in built stabilizer, double door type with humidity controller all as specified and directed |
| 105 | Supply, fixing, connecting and testing, automatic voltage stabilizer, wall mounted type, single phase, naturally air cooled, indoor type designed for input variation between 130 to 300 Volt and out put voltage stabilised at 230 Volts with accuracy of (+) 2.5% and capacity 1 KVA complete all as specified |
| 106 | Material and labour for submain wiring with PVC insulated, unsheathed 2 single core cable 1100 vols grade FRLS with stranded copper conductors of sizze 6.0 sqmm (Nominal area) drawn into conduit (Exisiting/ new), with and including 4 sq mm green PVC insulated FRLS stranded copper condutor cable as contineous earth wire terminated with copper lugs/ thimbles all as specified and as directed |
| 107 | Material and labour for rigid non-metalic PVC conduit, medium grade, not less than 19 mm dia (external) ISI marked (on surface) including all accessories/ fittings as Tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, GI saddles, pipe hook etc complete all as specified and as directed. |
| 108 | S&F Polycarbonate Deluxe universal switch socket comination with junction box 6A/16A, 240V, 50Hz complete all as specified and directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
