Military Engineer Services-MES has published Tender For Provision Of Kitchen Cabinets In Jcos Or Md Accommodation At Nhl Ohl Fafa Accommodation Under Ge (East) Mathura. Submission Date for this Tender is 04-05-2024. Furnitures Tenders in mathura Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 27-Apr-2024 | AMENDMENT | BOQ | 04-05-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premisescomplete all as specified and directed. |
| 2 | M&L forGlazed ceramic coloured tiles in vertical surface of size 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement motar 1:3 complete all as specified and as directed. |
| 3 | Demolition of stone slabs of any description or thickness in floors/apron etc laid bedded and pointed in any mortar complete all as specified and as directed. |
| 4 | M&L for 20mm thick black granite work (in single piece table rubbed and polished) in steps jambs, pillar, window cills, cooking platform and like laid over and including 10mm thick screed bed in cement mortar 1:4 and pointing in white cement(1:2) using marbal dust with admixture of pigment to match the shade of granite complete all as specified and as directed. |
| 5 | M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete as specified and as directed. |
| 6 | Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed. |
| 7 | M&L for Brick work with old size fly ash bricks, straight or curved on plan to any radius, in half brick thick built in cement mortar 1:4 complete all as specified. |
| 8 | Taking down cement plaster on brick walls and concrete surface including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed. |
| 9 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even & smooth (without using extra cement) complete all as specified and as directed. |
| 10 | M&L for preparation of newly plastered surface of wallsand applying two coat of oil bound distemper over and including a coat of alklai resitant primer complete all as specified and as directed. |
| 11 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed. |
| 12 | S&F 18 mm thick Hybrid WPC board in cupboard shutter/shelves/kitchen cabinet decorative laminated on one side and other side balancing white fixed with necessary stainless steel drilling screws/Anchoring bolt complete all as specified and as directed. |
| 13 | S&F 18 mm thick Hybrid WPC board in cupboard shutter/kitchen cabinet/shelves with both side balancing white fixed with necessary stainless steel drilling screws/Anchoring bolt complete all as specified and as directed. |
| 14 | S&F 12 mm thick Hybrid WPC board in cupboard shutter/kitchen cabinet with both sides balancing white fixed with stainless steel drilling screws/Anchoring bolt etc complete all as specified and as directed. |
| 15 | S&F ball bearing runners 450mm long Telescopic (KTS-20) full extension load capacity 50 Kgs complete all as specified and as directed. |
| 16 | S&F stainless steel handles, cast type polished bright of 100 mm size for kitchen cabinet and cupboard shutters complete all as specified and as directed. |
| 17 | S&F in repair 150 mm sizestainless steel Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 18 | S&F Magnatic catcher of size 20mm x 50mm suitable for cup board/kitchen cabinet shutter complete all as specified and as directed. |
| 19 | S&F Continuous (piano) hinges, stainless steel, bright finish or electrogalvanised Width of flaps 40mm (When open) complete all as specified and as directed. |
| 20 | Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sqm each complete all as specified and as directed. |
| 21 | S&F MS Framed work such as grills gratings, door and cooler stand, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work confirming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 22 | S&F powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows (Two track sliding/openable windows)ventilators with one or more rebates including joining cleat for fixing etc,complete all as specified and as directed. |
| 23 | M&L Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, sliding type double track aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed. |
| 24 | S&F 4 mm thick sheet glass, ordinary quality and glazing with aluminium/rubber beading in square not exceeding 0.5 square metre in each pane complete all as specified and as directed. |
| 25 | M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamal paint over and including a coat of zinc chromate primer complete as specified and as directed. |
| 26 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete as specified and as directed. |
| 27 | M&L for Non skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
