Military Engineer Services-MES has published Tender For Provision Of Aluminium Partition And Cabinet In Kitchen Chequared Tile Path And Stom Water Drain Incl 01 X Culvert For Certain Bldg, Rapair To Path, Hardstanding And Repair / Maintenance Of External Water Supply Distribution Lines, . Submission Date for this Tender is 04-05-2024. Submersible Pump Tenders in hasimara West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Apr-2024 | CORRIGENDUM TO BOQ | BOQ | 04-05-2024 |
| FileName | File Description | File Size |
| f30e1b2e-1041-41c4-b64e-83da105986cc.html | Tender Notice | 0 KB |
| BOQ_727670.xls | Tender Document | 0 KB |
| Tender8736.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | S&F powder coated aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows / ventilators and partitions etc., with one or more rebates including joining cleat for fixing etc., complete all as directed and specified. |
| 2 | S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber, neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as directed and specified. (Note:- Glass/ other filling material in panels shall be measured and paid separately) |
| 3 | S&F 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with aluminium frame partition or aluminium door, complete all as specified and directed. |
| 4 | S&F 18mm thick prelim wooden finished PVC plastic celluka ply for cupboard, shelf etc including all required joining accessory, complete all as specified and directed. |
| 5 | S&F 12mm thick prelim wooden finished PVC plastic celluka ply for cupboard door openable or sliding etc., including all required joining accessory, omplete all as specified and directed. |
| 6 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished, complete all as specified and directed. |
| 7 | S&F hasp & staple of size 100mm, safety type, aluminium, with mild steel hing pin including bolt to hinge plate and fixed with screw, complete all as specified and directed |
| 8 | S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanized width of flap (whwn open) 30mm, complete all as specified and directed. |
| 9 | S&F ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete al as specified and directed. |
| 10 | S&F plain sheet glass 4.8mm thick, of any colour and glazing with and including anodised aluminium snap beading or rubber/reopen bead, fixed in aluminium frame or door frame, complete all as directed and specified. |
| 11 | S&F 4 to 5mm thick ACP sheet in panels of aluminium partition, aluminium door exc. 0.5 Sqm in each pane with rubber beading, complete all as directed and specified. |
| 12 | S&F floor door stopper, 150mm long of aluminiurn alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed. |
| 13 | S&F 200mm long aluminium anodised tower bolt of extruded section, complete all as directed and specified. |
| 14 | M&L for 4mm thick pre-painted E-fibre board, designer/decorative,fixed or laid/inserted to GI snap grid frame size 605x605 mm work for false ceiling hangers with 4mm to 6mm dia. G.I. (length as required) adjusting level, fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners, 12.5mm dia, 40mm long, complete all as specified and directed. |
| 15 | S&F sinks made of stainless steel with draining board 1mm thick with plugs and wastes including in cement mortar onto dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste pipe & coupling 32mm including 15mmdia chromium plated bib tap with long shank connected to existing pipe line, complete all as specified and directed. |
| 16 | Taking down cement plaster on brickor concrete surfaces including racking out joints, hacking for key, scrubbing downwith water etc, complete all as specified and directed. |
| 17 | M&L for glazed ceramic coloured tilesof size350x250x7mm/450x350 x7mm thick each as in skirting or dado on vertical surfaces of wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4), complete all as specified and directed. |
| 18 | Surface excavation not exceeding 30cm deep and averaginf 15cm deep and getting out in soft/loose soil, complete all as specified and directed. |
| 19 | M&L for hardcore of gauge not exceeding 63mm of broken stone, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and directed. |
| 20 | M&L for 75mm thick PCC (1:4:8) type D- 2,(using 40mm graded crushed stone aggregatet) as in floors, pavings or plinth protection etc., complete all as specified and directed. |
| 21 | M&L for chequered cement concrete tiles 30cm X 30cm X 20 to 25mm thick, with mixture of white and grey cement in equal proportion set, jointed and pointed in neat cement slurry in floors over and including screed bed or bedding layer of CM (1:6), 15mm thick, complete all as specified and directed. |
| 22 | M&L for PCC (1:2:4) type B-1, (using 20mm graded crushed stone aggregate) as in sides of chequered tiles path, rounded or chamfered on edges, complete all as specified and directed. |
| 23 | Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation etc. and getting out in soft/loose soil, complete all as specified and directed. |
| 24 | Removing excavated materials to a distance exc. 250m but n. exc. 500m and depositing where directed, in any type of soil, complete all as specified and directed. |
| 25 | Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed. |
| 26 | Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed. |
| 27 | M&L for PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed. |
| 28 | M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed. |
| 29 | M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed. |
| 30 | M&L for Fly ash brickwork, old size brick, straight or curved on plan exc 6m mean radius, built in CM (1:4), complete all as specified and directed. |
| 31 | M&L for PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate), cast in situ, in benching, coping and the like etc including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed. |
| 32 | M & L for rendering 15mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces (external surfaces) of wall in CM (1:4),finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 33 | M&L for 450mm bore RCC pipe class NP-2, laid in trenches, laid and jointed complete with collars, complete all as specified and directed. |
| 34 | M&L for 100mm thick PCC (1:2:4) type B-2 (using 40mm graded stone aggregate) as in sub-bases, floors and pavings etc.,complete as specified and directed. |
| 35 | M&L for 75mm thick PCC (1:3:6), type C-2 (using 40mm graded stone aggregate) as in sub-bases, floors and pavings etc.,complete as specified and directed. |
| 36 | M&L for preparation of newly plastered ceiling surfaces and applying threecoats of white wash, complete all as specified and directed. |
| 37 | M&L for random rubble walling, uncoursed, well bonded, bedded and solidly hearted, built in CM (1:6) on sloping face of road, complete all as specified and directed. |
| 38 | M&L for PCC (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for drain ) and similar articles with plain faces and set in cement mortar (1:4), complete all as specified and directed. |
| 39 | S & F mild steel TMT bars 6mm to 8mm dia (Grade Fe-500D), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia., or securing with clips, complete all as specified and directed. |
| 40 | M & L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms molds, mitered/stopped ends etc., complete all as specified and as directed. |
| 41 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level), complete all as specified and directed. |
| 42 | M&L for 15mm thick rendering in CM (1:6) on other than fair faces of brick work or concrete surfaces of wall, finished even and fair, complete all as specified and directed. |
| 43 | M&L for 60mm thick machine pressed precast concrete coloured interlocking paver block any shape and size fixed with grey cement and pigment confirming to IS 15658-2006, M-35 grade, complete all as specified and directed. |
| 44 | M&L for sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed. ( Note : Consolidation thickness shall be measured for payment.) |
| 45 | M&L for 40mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in sub-bases, floors and pavings etc. finished even and fair (without using extra cement), complete all as specified and directed. |
| 46 | M&L for PCC (1:2:4) type B-0,(using 12.5mm graded crushed stone aggregate) as in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work, complete all as specified and directed. |
| 47 | S&F in repair CPVC ball valve of size 50mm dia, suitable for CPVC pipe including necessary fittings, complete all as specified and as directed. |
| 48 | S&F in repair CPVC ball Valve of size 40mm dia, suitable for CPVC pipe including necessary fittings, complete all as specified and as directed. |
| 49 | S&F in repair CPVC ball Valve of size 25mm dia, suitable for CPVC pipe including necessary fittings, complete all as specified and as directed. |
| 50 | S&F in repair CPVC pipe of size 50mm dia, in trenches, high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings includingall necessay fittings, solvents cement, complete all as specified and as directed. |
| 51 | S&F in repair CPVC pipe of size 40mm dia,in trenches, high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings includingall necessay fittings,solvents cement, complete all as specified and as directed. |
| 52 | S&F in repair CPVC pipe of size 25mm diain trenches high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings includingall necessay fittings,solvents cement, complete all as specified and as directed. |
| 53 | M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under aluminium coat and one aluminium finishing coat of paint complete for base support frame for watertanks at roof top/ground floor including taking down/dismantling of old unserviceable cross arms/bracing, clambs etc., complete all as specified and as directed. |
| 54 | Repair/servicing of existing sluice valve of 80mm dia after dismantling of upper cover, removing the spindle and make it leak proof by replacing the gland packing, nuts bolts with washer and gasket of both side, complete all as specified and directed. Note : Excavation and earthwork, if required, shall deemed to be included in the unit quoted rate. |
| 55 | All as per item No 54.00 here-in-before but of 100mm dia, complete all as specified and directed. |
| 56 | S&F power pack, industrial type, 180 AH, 12 volt, 25 plate alongwith copper lead and clamp, complete all as specified and as directed. |
| 57 | Supply, installation,commissioning & testing of electric driven submersible pump set415Volt, 3 phase 20 HP suitable for existing bore well including complete fixing arrangement as per manufacturer"s instruction and proper arrangement of vertical holding of column pipe and pumping set with and including necessary clamp, nuts, bolts, washers, reducers etc as required including taking up old pump from bore well and and deposited to AGE E/M store yard, complete all as specified and directed. |
| 58 | S&F mild steel column pipe 80mm bore heavy duty having wall thickness 5.4mm (3.0m/1.524m long) both end threaded with one socket conforming to IS-1239 (part-I), 1979 including painting with two coats of black bitumenous paint over a coat of red oxide zinc chrome primer internally and externaly (suitable for drinking purpose) including taking out old unserviceabe column pipe and deposited to AGE E/M store yard, complete all as specified and directed. |
| 59 | Taking up the existing column pipe of 80mm bore cleaning and descaling the column pipe of 80mm bore by wire brush including painting the internal and external surface of column pipe with two coats of black bituminous paint over a coat of red oxide primer (suitable for drinking water) after preparation of old painted surfaces and re-fixing of column pipe without any damages, complete all as specified and directed. Note: Unit quoted rate shall deemed to be included for taking up all column pipe of size 80mm bore upto pump level / for installation of pump to re-fix all column pipe after installation of pump, including connection of column pipe with delivery pipe of size 80/100/150mm including necessary fixing. |
| 60 | Flushing bore well at the site with air compressor of capacity 250PSI/1000 Cum and related accessories at least 60 hours till water discharge is free from sand and potable water and to achieve maximum discharge capacity, complete all as specified and directed. Note: Unit rate quoted shall deemed to be inclusive cost of necessary tools and equipment’s as required to the site of work and removing the same after completion of work. |
| 61 | S&F in repair fully automatic star delta starter, in steel sheet enclosure type with single phase preventer suitable for submersible pump, motor capacity 20 HP, 415V, 50 Hz, 3 phase, relay range 20-32 Amps, complete all as specified and directed. |
| 62 | S&F in repair PVC insulated, PVC sheathed, stranded, flat submersible copper conductor cable, of size 10 Sqmm 3 core, 1100 volts grade, complete all as specified and directed. |
| 63 | M & L for seven stage cleaning and sterlization of inside OHT reservoir capacity 25000 Gallons through bacterioligical treatment by using TERBAC G5, TERBAC-G-65 and ULTRA VOILET Ray, complete all as specified and directed. Make: Rays cleantech or equivalent as approved by GE. Process of seven stager are as under :- 1. First stage is to draining out the water by using exist valve or high capacity dewatering system. 2.Second stage is cleaning all the algae formation inside the tank by using TERBAC G10 a laboratory tested branded chemical of the company and scrubbing the walls of the tanks. 3. Third stage is fresh water cleaning by high speed jet pump with pressure 5 PSI. 4. Fourth stage and first bacteria screening is decertification by using TERBAC-G5 a Govt Laboratory certified brannded halogen compound. 5. Fifth stage is cleaning the floor of water tank by heavy duty industrial vaccum cleaner. 6. Sixth stage is the secord bacteria screening and sterilizing method by using ultra voilet ray ejector covering 360 degree within the tank and kills all suspended bacteria. 7. Seventh stage of cleaning and third bacteria screening is to sterilize the floor of the water tank by using laboratory certified, branded strong oxidizing agent TERBAC-G65 Note: (i) Company will submit Govt. laboratory test certificate of TERBAC-G5, TERBAC-G65. (ii) Fixing of sticker mentioning the date of cleaning, name of site and also providing certificate confirming the completion of steriliztion of water tanks mentioning the name of station and date of cleaning. |
| 64 | Attending pipeline breakdown of Cl pipe of 80mm dia by making lead joint with lead and spun yam and molding clay including takin up/down pipe using chain pulley or rope and excavation in any type of soil including returning filling and removal of soil and testing of pipe line, complete all as specified and directed. Note :- (i) Earth work/materials/fitting/pipe line etc. shall be measured and paid separately under respective items (ii) Spare costing up to Rs 500 shall deemed to be included in quoted rate. |
| 65 | Taking up 150mm boreCI water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead and deposited to AGE E/M store yard, all as specified and directed. |
| 66 | All as per item No 65.00 here-in-before but 100mm bore, complete all as specified and directed. |
| 67 | All as per item No 65.00 here-in-before but 80mm bore, complete all as specified and directed. |
| 68 | M&L for run lead joints in position for cast iron spigot and socket ends for size 200mm bore, complete all as specified and directed. |
| 69 | All as per item No 68.00 here-in-before but 150mm bore, complete all as specified and directed. |
| 70 | All as per item No 68.00 here-in-before but 100mm bore, complete all as specified and directed. |
| 71 | All as per item No 68.00 here-in-before but 80mm bore, complete all as specified and directed. |
| 72 | Supply, install, commissioning & testing, liquid chlorination chemical dosing pump of capacity 02 USGPD to 40 USGPD at 100 psig, high pressure single head gear motored adjustable dosing pump with accessories including lead, tubing, connecting nuts, injection check valve, clay weight and ferrules complete with all accessories as per manufacturer"s instructions including taking out old unserviceable pump, complete all as specified and directed. Note-Old dosing pump shall be deposited to MES store yard. |
| 73 | Supply, install, commissioning & testing, chlorination preparation cum settling chemical dosing system consisting of 100 Itrs PE/FRP solution tank with PE/FRP lid and level gauge alongwith speed reducing motor and SS-316 agitator with shaft and blade mounted on tank weight and ferrules complete with all accessories as per manufacturer"s instructions including taking out old unserviceable dosing system and deposited to AGE E/M store yard, complete all as specified and directed. |
| 74 | S&Frotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe, complete all as specified and directed. |
| 75 | M&L for CI/DI fitting such as Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces, single branch "Y" junction, double branch, cross (flange sockets or socket and spigot) collars, caps and plugs etc.size up to 200mm bore, complete all as specified and directed. |
| 76 | M&L for 100mm bore, ductile iron pipe (K-7), socket and spigot end as per IS:8329 with internal cement mortar lining and external bitumen coating for potable water supply with and including rubber ring joints as per IS:5382 (1985), giving satisfactory hydraulic field testing and commissioning as per technical specification etc laid in trenches including taking out/down old unserviceable pipe any type, complete all as specified and directed. (Note: Excavation and earth work shall be measured and paid separately under respective items) |
| 77 | Note: An amount of Rs.11028.00 on account of Credit Schedule for schedule "A" part - II shall be deducted from the total amount of BOQ to arrive at the contract sum. |
| 78 | Supply and fixing energy efficient ‘LED Flood Light120 W LED luminairewith Aluminium dia cast housing, toughened glass cover with IP 66 protection, CCT 5700 K including fixing arrangment on wall/pole / surface and connecting cable up to nearest ceilign rose into flexible PVC conduit. Make : Crompton/Havells/ Surya/Philips |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
