Supply, Installation, Testing, Commissioning Of 100 No Led Street Light Luminaire With Pressure Die Cast Aluminium Housing Body, 70 Watt On 5 M Long Octogonal Poles, With Base Plate, Arm Bracket , With Suitabe Foundation From Kali Mata To Holy Cave , And , Bijbehara-Jammu And Kashmir
TDR : 43159548
Tender Notice
BOQ
Expired
Bijbehara
Jammu And Kashmir
Supply, Installation, Testing, Commissioning Of 100 No Led Street Light Luminaire With Pressure Die Cast Aluminium Housing Body, 70 Watt On 5 M Long Octogonal Poles, With Base Plate, Arm Bracket , With Suitabe Foundation From Kali Mata To Holy Cave , And
Name of Work:- SITCof100 No LED Street light luminaire with pressure die cast aluminium housing body, 70 watton 5 m long Octogonal poles,with base plate, arm bracket , with suitabe foundation from Kali Mata to Holy cave , andback carriage to Divisional stores /Sub Store after Yatra.
Sl. No.
Item Description
1
SITCof100 No LED Street light luminaire with pressure die cast aluminium housing body, 70 watton 5 m long Octogonal poles,with base plate, arm bracket , with suitabe foundation from Kali Mata to Holy cave , andback carriage to Divisional stores /Sub Store after Yatra.
2
Supply and erection of Hot Dip Galvanized octagonal pole of 3 mm thickness 5 Mtr. Long pole with top dia 70 mm and bottom dia 130 mm with base plate of size 220 x 220 x 12 mm, requiste template, including cost of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc.( As per IS2062, BSEN 10025 etc) The foundation bolts as per manufacturer design should be hot dipped galvanized (in single dipping with not less than 65micron as per ASTM-A123 and 153 )complete with door and locking arrangement, bakelite sheet,neutral link, suitable MCB or any other electrical accessories (excluding their cost )inclding connection etc. t it also includescost of RCC 1:1.5:3 for foundation of size 0.4 m x 0.4 m x .9 m of which0.3 m above ground ), with minimum 4 nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 150 mm C.C. for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer in charge . Make : preferably Bajaj/Philips/CG/Surya/BPP/Aster .
3
Supply , fabrication and erection ofdetachable single arm bracket 600 mm overhang made of 48.3mm OD Dia.MS pipe (3.5mm thick) as per IS 1161 welded to canopy 400 mm long with angle of inclination of 105 degree to the vertical.The canopy should be suitable for 70 mm top dia pole.The bracket should be hot dip galvanized alongwith 3 no. 10mm dia.SS bolts
4
Supply, installation, Testing & commissioning of LED type IP-66 and above 70/72 W Street Light FittingCompatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hzapplication. Compliance to IS 10322/IEC 60598, LM 79 & LM 80
5
Supply , laying , testing and commissioning ofround ,XLPE insulated,unarmoured, Aluminium conductor for working voltages of 1.1 kv , conforming to IS :7098 Part I ,including cost of labour and material required to complete the job in all respects upto the entire satisfaction of the engineer-in-charge 16 square mm, 2 core 1100V, Preferably Havels/Grindlays/Gloister/universal/Pelican/Paramount make.
6
Spiral Earthing of Octagonal poles as per REC Standards
7
Providing of service connection and earthing to the luminaire to be tapped from the cable using 1.5 sq mm FR PVC insulated single core copper conductor of standard make
8
Dismantling of all the poles installed in Kalimata Track (approximately 140 in No.), light, cable and all other accessories and back carriage to Divisional/Sub Store.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
