Border Security Force-BSF has published Tender For Installation Of 1000 Liters Per Day 2X500 Lpd Solar Water Heater At 189 Bops Under Ftr Hq Gujarat. Submission Date for this Tender is 26-04-2024. Solar Heater Tenders in Gandhinagar Gujarat. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Supply, Installation & Commissioning of 2x500 LPD Solar Water Heating System direct type consisting of 2x4 nos solar flat plate collector ISI marked with copper header & raiser and 50 mm insulation of rockwool/Glasswool 50mm back and 25 mm on sides with 100 mm aluminium box with one no toughened glass 4 mm with more than 80% transmittance and solar hot water storage tank 2x500 ltr made ofSS 304 grade covered with 50 mm PUF insulation and cladded with colour coated GI 0.4 mm with 2/3 KW electrical backup with thermostat with 2x01 temperature gauge and necessary hose pipe between collector and hot water tank system fixed over on MS angle iron 40x40x5 mm including nuts bolts, grouted in PCC 1:2:4 type B-1 blocks (30x30x30 cm) and two coats of painting over coat for red oxide. Complete system should confirm to BIS and approved as per MNRE specifications with 1 years warranty from the date of installation . Racold/V-Guard//Rashmi Solar/Bosch/Tata BP/Honeywell/Kotak Urja Make. |
2 | Structural steel work riveted bolted or welded in built up section , trucesse and frame work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, i/c all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fiitings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall |
4 | (i)25 mm nominal outer dia pipes |
5 | (ii)20 mm nominal outer dia pipes |
6 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
7 | (i)25 mm nominal bore |
8 | Providing and fixing brass stop cock of approved quality : |
9 | (i)20 mm nominal bore |
10 | Providing and fixing brass bib cock of approved quality : |
11 | (i)20 mm nominal bore |
12 | Providing and fixing gun metal non-return valve of approved quality (screwed end) : |
13 | (i)25 mm nominal bore (Horizontal) |
14 | Providing and fixing GI pipes complete with GI fittings and clamps, i/c cutting and making good the walls etc : |
15 | (i)20 mm nominal bore |
16 | Making connection of GI distribution branch with GI main of following sizes by providing and fixing tee, including cutting and threading the etc complete : |
17 | (i)25 to 40 mm nominal bore |
18 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (1000 ltrtank) |
19 | Painting with aluminium paint of approved brand and manufacture to give an even shade . (for painting of Stand) |
20 | Two or more coats on new work |
21 | Providingandlayinginpositioncementconcreteof specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
22 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail