|
| 1 | Supply of MS structural steel like ISMC, ISMB, ISA, Chequered plate, MS plate, MS flat, MS Pipe, Round bar etc. as per the detail scope of work in Section-V |
| 2 | Supply of MS Electroforged grating of Rectangular pattern as per the detail scope of work in Section-V. |
| 3 | Shifting, Fabrication, Erection and painting of structural steel viz. Supports, Platform, Stair case, Hand railing etc. as per the detail scope of work in Section-V. |
| 4 | Supply of HST3 M8x75 -/10 expansion type anchors as per the detail scope of work in Section-V |
| 5 | Supply of HST3 M12x115 40/20 expansion type anchors as per the detail scope of work in Section-V |
| 6 | Supply of HST3 M16x145 45/25 expansion type anchors as per the detail scope of work in Section-V |
| 7 | Supply of HST3 M20x170 -/30 expansion type anchors as per the detail scope of work in Section-V |
| 8 | Supply of HDA-P M12x125/50 pre-set undercut anchor as per the detail scope of work in Section-V |
| 9 | Supply of HDA-P M16x190/60 pre-set undercut anchor as per the detail scope of work in Section-V |
| 10 | Installation of HST3 M8x75 -/10 expansion type anchors as per the detail scope of work in Section-V. |
| 11 | Installation of HST3 M12x115 40/20 expansion type anchors as per the detail scope of work in Section-V. |
| 12 | Installation of HST3 M16x145 45/25 expansion type anchors as per the detail scope of work in Section-V. |
| 13 | Installation of HST3 M20x170 -/30 expansion type anchors as per the detail scope of work in Section-V |
| 14 | Installation of HDA-P M12x125/50 pre-set undercut anchor as per the detail scope of work in Section-V |
| 15 | Installation of HDA-P M16x190/60 pre-set undercut anchor as per the detail scope of work in Section-V |
| 16 | Shifting, Cleaning and Erection of Pipes and pipe fittings as per the detail scope of work in Section-V |
| 17 | Welding of Pipe, Pipe fittings, Valves, Equipment / Components, Material: CS to CS, End connection: SW / FW, Welding process: SMAW as per the detail scope of work in Section-V. |
| 18 | Welding of Pipe, Pipe fittings, Valves, Equipment / Components, Material: CS to CS, End connection: BW / NW, Welding process: GTAW for root and GTAW / SMAW for subsequent passes as per the detail scope of work in Section-V. |
| 19 | Welding of Pipe, Pipe fittings, Valves, Equipments / Components, Material: CS to CS, End connection: BW / NW, Welding process: SMAW as per the detail scope of work in Section-V. |
| 20 | Welding of Pipe, Pipe fittings, Valves, Equipment / Components, Material: CS to SS, CS to Alloy steel, SS to SS, SS to Alloy steel, Alloy steel to Alloy steel, End connection: SW / FW, Welding process: GTAW for root and GTAW / SMAW for subsequent passes as per the detail scope of work in Section-V. |
| 21 | Welding of Pipe, Pipe fittings, Valves, Equipment / Components, Material: CS to SS, CS to Alloy steel, SS to SS, SS to Alloy steel, Alloy steel to Alloy steel, End connection: SW / FW, Welding process: SMAW as per the detail scope of work in Section-V. |
| 22 | Welding of Pipe, Pipe fittings, Valves, Equipment / Components, Material: CS to SS, CS to Alloy steel, SS to SS, SS to Alloy steel, Alloy steel to Alloy steel, End connection: BW / NW, Welding process: GTAW for root and GTAW / SMAW for subsequent passes as per the detail scope of work in Section-V. |
| 23 | Dye Penetrant Test of weld joints as per the detail scope of work in Section-V. |
| 24 | Pre Heat treatment of welding joint with induction coil heating method or other standard method as per the detail scope of work in Section-V |
| 25 | Post WeldHeat treatment of welding joint with induction coil heating method as per the detail scope of work in Section-V |
| 26 | Tube plugging and Plug/Fillet/Seal welding with the tube sheet / tube sheet overlay, Material: SS, Incolloy, Copper, Cupro nickel, Low alloy steel, CS as per the detail scope of work in Section-V. |
| 27 | Dismantling of pipe and structural steel items by cutting / grinding / unbolting viz. Pipelines, Pipe fittings, Valves, Strainer, Enclosure, Equipment / Sump covers, platform, Stair case, ladder, hand railing, Structure, Work bench, Rack, Stool etc as per the detail scope of work in Section-V. |
| 28 | Shifting of the dismantled pipe and structural steel items viz. Pipelines, Pipe fittings, Valves, Strainer, Enclosure, Equipment / Sump covers, platform, Stair case, ladder, hand railing, Structure, Work bench, Rack, Stool, Scrape etc. from location to the Scrap yard / Store or any other designated place inside the Site premises as per the detail scope of work in Section-V. |
| 29 | Erection of scaffolding/staging along with work platform including material, labour, tools & tackles etc. complete at various locations of KAPP-3&4 as per the detail scope of work in Section-V. |
