Military Engineer Services-MES has published Tender For Spl Repair Of Interlocking/ Chequred Tile, Pathway/ Hardstanding, Curb Stone And Connected Works Inside Dgncc Camp Under Ge (East) Delhi Cantt-10. Submission Date for this Tender is 01-05-2024. Footpath Work Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 2ca43bd1-871e-4dfc-b8aa-e7457c34c06c.html | Tender Notice | 0 KB |
| BOQ_727462.xls | Tender Document | 0 KB |
| TENDER05.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 2 | M & L forPCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 3 | M & L factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required (Size and pattern as approved by GE) and including dismantling of old existingkerb stoneof any type and size etc complete all as specified and as directed. (Note : Curb stone shall be fixed over 10-15cm thick PCC 1:4:8, The PCC item shall be measured and paid separately under srl item No. 02) |
| 4 | M & L for preparation of new plastered / un-plastered brick, kerb stone or any other type of concrete surfaces and applying two coats of synthetic enamel paint area exceeding 10 cm width or girth over 1-1.5mm thick wall care putty (JK Birla) and a coat of priming coat of exterior primer applied @ 0.90Ltr/ 10 Sqm complete all as specified and as directed by EIC. |
| 5 | M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position including demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete. |
| 6 | M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-35 Grade with grey cement and pigment laid over & including 50mm thick sand cushioning, laid duly mainting propper slope as per requirement at site over hardstanding/path including dismantling of existing interlocking tiles of any type complete all as specified and as directed. |
| 7 | M & L for preparation of black top surfaces of road by cleaning with air blower and applying 1.5mm thick road marking strips, dahses, arrows letters etc upto 10cm wide or more (retro-reflective) of white or golden yellow shade/colour using hot thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and driven by experienced operator on road surface including cleaning all loose dirt, seals, oil greases and foreign materials etc complete. (Make : Asian Paints/Berger/Apco). |
| 8 | M & L for coloured Chequered cement concrete tiles 25cm x 25cm x 20-22mm thick, set, jointed and pointed in neat cement slurry over and including 15mm thick screed bed in CM 1:6 after dismantling of existing flooring or tiles of any type and sizecomplete all as specified and as directed. |
| 9 | M & L for Preparation of new/Old plastered unplastered external surfaces of walls upto 4 storied buildings and applying 2mm thick layer of Birla White/J K White wall care putty, again sand papering to make surfaces smooth andapplyinggTwo coats of 100% Premium/Ist quality acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted)over and including priming coat of exterior primer complete all as specified and as directed. Make: BERGER (WEATHER COAT ALL GUARD), ASIAN PAINTS (APEX ULTIMA), NEROLAC (EXCEL MICA MARBLE) |
| 10 | M & L for 10-12mm thick polymer modified readymix cement based plaster Make : Ultratech (Brand name Readiplast) complying to IS-1661-1972, IS-2250-1965, IS-2402-1963) or equivalent as approved by GE, applied as per manufacturer"s instructions, on fair faces of brick masonry or concrete surfaces finished even and smooth, including taking down of existing cement or cmenet lime plaster of any thickness and any description on brick or stone walls including raking out joints, hacking for key and scrubbing down woith water,complete all as specified and as directed. |
| 11 | S & F in repair precast cement concrete type B0 1:2:4 (12.5 mm graded aggregates) louvres and jallies, 50mm thick set in CM (1:4) (measured solid), including all mouldings but excluding frame (Pre cast frame shall be measured and paid seperately) complete all as specified and directed. |
| 12 | S & Fprecast RCC coping/post of size 600x100x50 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed. |
| 13 | M & Lfor 18-20 mm thick granite (of any type) work( table rubbed and polished) in Pillars of Gates, steps, jambs, pillars, window cills, any type of platforms or floorings and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab over and including 15 mm thick screed bed in CM 1:4 includingrounding to edge of granite as per required and after dismantling of existing granite of any description including cement mortar bedding (but not backing) and rubbish off the premises complete. |
| 14 | S & F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of Plainor corrugated AC sheeting, any gauge, thickness, complete all as specified and as directed. |
| 15 | Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Paymentfor providing grooves shall be made separately). |
| 16 | S & F for wall cladding tiles of size 300mmx600mmx10-12mm thick on vertical surfaces of wall over and including rendering 10mm thick cement plaster in CM 1:4 (Make :Kajaria/ Unistone/ ultra) and as per sample approved by GE after dismantling of old tiles with backing complete all as specified and as directed. |
| 17 | S & F "RAJSHRI" Brand factory made WPC railing combining WPC board/Fancy designer type grating and WPC frame 100% solid WPC (wood polymer composite) railing of required length and of 2" to 2.5" height , comprising of virgin PVC resin of K value 58-60 (Suspension Grade) , Calcium Carbonate and natural fibres (Wood Powders/rice husk//wheat husk) and non toxic additives, made from single extrusion process, WPC foam board with having minimum density 650kg/cbm and WPC frame having minimum density 780kg/cbm manufactured by "RAJSHRI" an ISO 9001-2015 certified Company, having good screw holding capacity (screw withdrawal strength of 2000N (Face) & 1100N (Edge) , Minimum comprising of 50N/mm2, Modules of elasticity 850N/mm2 and resistance of speed of flame of class A category with property of being termite/Borer free water /Moisture proof and fire resistance. For WPC railing WPC jali to be fixed with WPC frame of size 75x50mm with necessary supporting lengths at vertical as well as horizontal at wall frames to be fixed with 3"x3" GI "L" or SS cleats to support vertical frame lengths after dismantling of existing RCC jallies with frames complete all as specified and as directed. (Make : Rajshree or equivalent) (Note : The said item shall be fixed over boundary walls/roof tops and in any other positions as requirement at site) |
| 18 | M & L for Brick work with sub class "B" bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified. |
| 19 | Taking down cement or cement lime plaster , any description on brick or stone walls or from concrete surfaces/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 20 | M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and fair in any position incl scafolding etc, complete all as specified and as directed. |
| 21 | Demolition and breaking up drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar for 150mm to 300mm dia pipe, and removal of debris from site and deposited where directed at a distance not exc 1KM from site complete all as specified and as directed. |
| 22 | M & L for 150 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with colleres complete laid in trenchesand testedcomplete all as specified and as directed. |
| 23 | M & L for 200 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with colleres complete laid in trenchesand testedcomplete all as specified and as directed. |
| 24 | M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 150 mm bore incl forming cradles complte all as specified and directed. |
| 25 | M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 200 mm bore incl forming cradles complte all as specified and directed. |
| 26 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 27 | M & L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, gates; ladders,walk ways; railings, drain covers and similar workconforming to Fe.290.Gde-E-165. |
| 28 | Material and labour for preparation fo new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 29 | Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
