Indira Gandhi Centre For Atomic Research-IGCAR has published Tender For Annual Maintenance Including Repairs And Renovation Of Aluminium Door And Windows, Providing Partitions In Various Laboratory And General Buildings In Igcar For The Year 2024-2025. Submission Date for this Tender is 24-04-2024. Door Tenders in kalpakkam Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z Sections, (Anodised transparent or dyed to required shade according to IS:1868 Minimum Anodic coating of grade AC 15) anodized and other sections of approved make confirming to IS:733 and IS:1285 including fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per architectural drawings and as directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required. (Fittings, Glazing and Laminated/Aluminum panelling shall be paid for separately) Note: 1) The rates for aluminium is inclusive of all fasteners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints. 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts on his own cost. 4) Only Aluminium members alone shall be measured and paid for. |
| 2 | Providing and fixing IS: 3564 marked Al die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts "Everite/ Hardwyn" or approved equivalent make complete as per specifications and as directed by the Engineer-in-Charge. |
| 3 | Providing and fixing 12mm thick prelaminated with decorative lamination on both sides, 3 layer medium density (Exterior grade) particle board Grade-I, Type - II confirming to IS:12823 bonded with phenol formaldhyde synthetic resin of approved brand and manufacture in panelling fixed in aluminium doors, window shutters and partition frames with C.P brass /stainless screws etc. complete as per drawings and as directed by Engineer-in-charge. |
| 4 | Providing and fixing double action floor spring of ‘Hardwin’ or approved brand and manufacturer (confirming to IS:6315) for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece of M.S Sheet outer box with slide plate etc. complete as per directions of Engineer-in-Charge with brass cover plate. |
| 5 | Providing and fixing Swing type heavy quality top PIVOT for suspending aluminium door shutters of single or double leaf all as directed by the Engineer-in-Charge. |
| 6 | Providing and fixing Swing type heavy quality bottom PIVOT for suspending aluminium door shutters of single or double leaf all as directed by the Engineer-in-Charge. |
| 7 | Providing and fixing Aluminium hanging Heavy Quality floor door stopper ISI marked with Twin Rubber stoppers, anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete all as per specification and as directed by the Engineer-in-charge. Note : Sample to be approved by the Engineer-in-charge. |
| 8 | Providing and fixing glazing with 5mm thick clear Float glass panel in aluminium doors, window, ventilator shutters and partitions etc with Neoprene gasket including cost of neoprene gasket complete as per the drawings and directions of the Engineer-in-Charge. |
| 9 | Providing and fixing reflective / non reflective type sun control polyester film ‘Garware’ or approved equivalent of required shade & colour, pasted to doors/ windows glazing as per requirement including cleaning the surface before and after pasting complete all as directed by the Engineer-in-charge. |
| 10 | Providing and fixing anodised aluminium tower bolts of size 300x10mm (Barrel Type) ISI marked (IS: 204) of approved make (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. all as per specifications and as directed by the Engineer-in-Charge. |
| 11 | Providing and fixing anodised aluminium tower bolts of size 150x10mm (Barrel Type) ISI marked (IS: 204) of approved make (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. all as per specifications and as directed by the Engineer-in-Charge. |
| 12 | Providing and fixing anodised aluminium tower bolts of size 100x10mm (Barrel Type) ISI marked (IS: 204) of approved make (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. all as per specifications and as directed by the Engineer-in-charge. |
| 13 | Providing and fixing IS:12817 marked stainless steel butt hinges of size 125 x 64 x 2.5mm (heavy weight) "GARG" or equivalent approved make with suitable stainless steel screws etc. complete all as per specifications and as directed by the Engineer-in-charge. |
| 14 | Providing and fixing IS:12817 marked stainless steel butt hinges of size 100 x 60 x 2.5mm (heavy weight) "GARG" or equivalent approved make with suitable stainless steel screws etc. complete all as per specifications and as directed by the Engineer-in-charge. |
| 15 | Providing and fixing IS:12817 marked stainless steel butt hinges of size 75 x 50 x 2.5mm (heavy weight) "GARG" or equivalent approved make with suitable stainless steel screws etc. complete all as per specifications and as directed by the Engineer-in-charge. |
| 16 | Providing and fixing 4 Lever Dead/Mortice Lock ‘Godrej/Everite’ or other approved equivalent make suitable for aluminium door with a pair of keys complete all as per specification and drawings. |
| 17 | Providing, supplying and fixing in position factory made WPC Door frme of size 75x50mm of approved shape including sawing, jointing as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fass 40mmx3mm thick 200mm long or with coach screws including jointing materials, adhesives, fastners, labour etc., complete as per manufacturer recommendation and as directed by the Engineer-in-charge. Note: Measurement shall be based on actual length of Frame used. |
| 18 | Providing and fixing 30mm thick factory made WPC door shutters (Wood plastic composite) with minimum density of 600 Kg/Cu.m. of approved make including all accessories like 3nos of 100mm good quality of approved SS hinges, 2 nos of 125mm grip PVC bow handles, 2nos of Aluminium 75mm baby latch for each door complete all as per manufacturer recommendations and as directed by the Engineer-in-charge. (Sample, Model and colour to be got approved before procurement). |
| 19 | Providing and fixing Stainless steel (SS 304 Grade) adjustable friction windows stays of size 205x19mm of "Geetavin/Imex" or approved quality with necessary stainless steel screws to the side hung windows as per specifications and as directed by the Engineer-in-charge. |
| 20 | Supplying and fixing in position ornamental aluminium anodized grill standard section of deco grill or any other approved equivalent with aluminium matt finish having grill pattern 75x75mm of 7mm thick for window opening fitted with aluminium channel, beading clips, etc., complete all as per manufacturer"s specification and as directed by the Engineer-in-charge. Note: Sample of grill shall be got approved before bulk purchase. |
| 21 | Servicing the aluminium glazed windows, frames and sliding shutters of different sizes in various elevations including cleaning guide ways of outer frame and shutter and other minor repairing and correction required for the free movement of sliding for and locking shutter to be properly achieved etc. complete any replacement of wornout item with a new materials will be paid for separately under relevant schedule items all as directed by the Engineer-in-charge. |
| 22 | Servicing the aluminium doors of different sizes at various lifts, fully panelled/partly glazed and panelled including oiling and minor adjustment of hydraulic floor spring and hydraulic door closers, tie rod and dead lock has required for smooth movement of doors with screws, bolts and nuts wherever required for free movement of doors and locking of shutters to be properly achieved etc. complete any replacement of wornout item with a new materials will be paid for separately under relevant schedule items all as directed by the Engineer-in-charge. |
| 23 | Supplying, removing the existing damaged parts and fixing in position the following approved make and type hardware fixtures with suitable screws/nuts and bolts etc. complete as directed by the Engineer-in-charge. |
| 24 | Sliding assembly set with roller etc. |
| 25 | Sliding shutter bottom wheel |
| 26 | PVC switch type Heavy duty sliding aluminium glazed windows, shutter lock of 80mm long |
| 27 | PVC rubber of all types leading gasket etc., for windows, sliding shutter/door shutter |
| 28 | Floor spring top plate |
| 29 | Heavy duty 150mm aluminium hinges. |
| 30 | Openable window handle |
| 31 | Removing carefully the aluminium partition/windows and make them suitable for fixing the same complete all as directed by the Engineer-in-charge. Note: Extra aluminium material used shall be paid separately under relevant item. |
| 32 | Supplying and fixing the following sizes of furniture fittings with necessary bolts, nuts and screws for the door complete. |
| 33 | 250mm long M.S. oxidized aldrop with 20mm dia rod with bolts, nuts, screws complete set. |
| 34 | 250mm long aluminium anodised aldrop |
| 35 | Repairing all types and sizes of defective door closers including changing the broken arms, springs, leavers from the old removed defective door closers including filling hydraulic oil where required tensioning the springs, servicing and refixing it back in position for effective and smooth operation all as directed by the Engineer-in-charge. |
| 36 | Providing and Fixing Homogeneous PVC sheet, 2mm thick, conforming to IS:3462 latest edition in flooringand skirting (Polyfloor or approved equivalent make) in approved pattern, colour & shade on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer like Dunlop-S -758, or Fevicol SR 998, or approved equivalent including cleaning & preparation of surface, levelling small undulations with plaster of paris if required , rolling with light wooden roller weighing about 5 kg all complete all as per specification and as directed by the Engineer-in-Charge Note: The sample tile shall be got approved by the Architect/Engineer before procurement. |
| 37 | Supplying and fixing Notice board lock of size 25mm wide x 100mm approved make / quality with duplicate keys after removing the old serviceable lock complete. |
| 38 | Operating the Miscellaneous works for quantified jobs for department as directed Engineer-in-charge and necessary accessories will be borne by department. Note: If Job is allocated to the contractor he has to engage minimum one Fitter under general shift 9.00 to 17.30 hours per day for 1 unit. |
| 39 | Providing and fixing double Tubular scaffolding system using H-Frames / APS system or (cup lock type) on the exterior side upto seven story height made with 40mm dia M.S. tube 1.5m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in-charge. The elevation area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding. |
| 40 | Overall rebate (Optional) |
| 41 | INR Zero Only |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
