|
| 1 | Replacement of over head Electric wire with underground cable of street light pole Near G, IH, B21-B27, & A10- A27 Type Quarters Roadin ResidentialCampus |
| 2 | Supply & laying of 6 sq mm x 4 core aluminium conductor XLPE armored served aseathed cable 1100 volts grade of following size at suitable depth below ground level over cushion of 75 mm thick sand alround and protected with well burnt bricks on & along the cable & back filling after digging the soil & it back filling/ on wall/ floor the cable run concealed manner, with cutting and plastering, complete in all respect as per direction of engineering incharge. The armouring of cable shall be properly connected with the earth terminal of the pole panel and as required lugs,, gland etc.Make- Grandlay, Rallision, RR Kable, Havells,KEI, V-marc, Finolux.. |
| 3 | Supply and fixing offollowing plain or pin type copper pin plated lug to cable lead insulating with tape and making connection. Complete in all respect.6 sq mm |
| 4 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.for loop in loop out fixed on pole. (But without MCB/RCCB/Isolator6 way Double Door for use of Loop in Loop out Box. Make:- L&T , Havells, Legrand, Schinder, ABB, C&S.. |
| 5 | Supplying and fixing6 to 32amps rating, FP , 415 volts, miniature circuit breaker (10kA), C curve, suitable for inductive load of followingpoles in the existing MCB DBcomplete with connections,testing and commissioning etc. as required.complete in all respect.Make- L&T, Havells, Legrand, Schinder, ABB, HPL, C&S. CAT-B |
| 6 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer Incharge 6 Sq mm 4 core |
| 7 | Supplying and drawing 2 x 1.5 sq mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required.Complete in all respect. Make- L&T, Havells,Rallision, Finolex, R R Kable, Kalinga Premium, KEI. V-marc, Grandlay. |
| 8 | Earthing with G.I Earth Plate of 600mm x 600mm x 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ cke and salt as required. |
| 9 | Supplying laying 25 x 5 mm G. I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with G.I . Nut, bolt, Spring, washer etc. as required. ( Jointing shall be done by overlapping and with 2 sets of G. I. nut. Bolt & spring washer spaced at 50 mm ) |
| 10 | Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect |
| 11 | Providing and fixing 6 SWG dia G. I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/ cable as required. |
