Indian Institute Of Management-IIMA has published Tender For Construction Of Indoor Badminton Court With Peb Structure At Iim Indore.. Submission Date for this Tender is 01-05-2024. PEB Tenders in indore Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Apr-2024 | corrigendum1 | Technical Bid | 24-04-2024 |
| 2 | 25-Apr-2024 | Corrigendum1 | Date | 01-05-2024 |
| Sl. No. | Item Description |
| 1 | FLOORING: Rollable Surface for Badminton (BWF APPROVED ) Synthetic rollable Sports Flooring for Badminton Court should meet following specifications.- SIZE OF COURT 2.7m x 16lmCourt x 3 ROLL dimensions of court 16m x 8.10m 3.9mm thick synthetic rollable badminton sports surface comprising of 100% pure calendered PVC wear layer, protecsol treated with vertical closed cell foam backing. Sanosol treatment for protection from antibacterial and fungicidal, Should have a ‘CANVAS’ texture for good grip, stabilization and no friction burns. Easy to installation with the help of Velcro system. Along with International standard game line marking. Weight should be 1.85 kg per sqm Dimensional stability should be 0.2% Initial Tear Resistance – 7 daN Fire Rating M3 (NFP62-11/EN434. Abrasion resistance 8 N/m as per EN1517 Indentation resistance = 0.5 mm as per EN1516 World Badminton Federation. |
| 2 | Substructure: Substructure of solid wood flooring shall consist of sleeper of Spruce or Pine having 63 mm wide and cross-sec&on of 38 mm and laid perpendicular to the main flooring planks at a spacing 487.5mm centre to centre including 19 mm thick pads at 305mm centre to centre spacing and polyethylene membrane installed over the concrete base beneath the flooring system as a vapour barrier between the concrete and wood floor. Vapour Barrier: .20mm polyethylene membrane installed over the concrete base beneath the flooring system as a vapour barrier between the concrete and wood floor. • Solid Hardwood floor board should be prefinished to eliminate the risk of human error when sanding and lacquering on site and easy and fast installation. • Solid hardwood floor should be long life and low maintenance cost. • Solid hardwood floor should be approved by the following Federation: BWF here means Badminton World Federation. Note: 1. For executing Shuttle court flooring, the contractor should tie up with a Badminton World federation certified company & work should be executed as per the “Grade-1 BWF International elite”. 2. Prior approval should be taken for engaging any certified company as explained above. |
| 3 | Design , Supply and Erection of Pre Engineered Building with 12 m clear internal height over the Prepared structure to receive the said Structure including its detail Structural Designing as per the Architectural drawings including Structural Frame work for Walls and Roof , wall cladding & roofing, Canopies,Cage Ladders, Polycarbonate Corrugated Profiled sheets of 2 mm thk for Skylight and wall light of 2 mm thick etc. complete as per the approved tender drawings, technical specifications and instruction of Engineer-in charge. 1)Built up Members Jindal / TATA/ SAIL/ 345 MPa. 2)Hot Rolled Members. Beams and Columns Jindal/ TATA/SAIL 345 MPa. 3)Cold Formed Secondary Members. Galvanised Steel Coating 275 GSM, 345 Mpa. 4)Galvanised Steel coating E275 GSM, 345 MPa. 5)X Bracing Members - a) RodsGrade E250, Type A, 250 MPa. b) Angles IGrade E250, Type A, 250 MPa. 6)Anchor Bolts ASTM A 36M IS 2062:2006 (Black/ Unpainted Bolts) SAIL material standard. 7)High Strength Bolts ASTMA 325M, complete in all respect to the entire specification of Engineer InCharge. 8 a)Roofing - Single roofing proposed with outer top sheet with approved color coated roofing sheet of 0.50 mm total coated thickness (TCT). 13mm thk XLPE insulation with Aluminum foil. Roofing will be piercing type roofing (Screw down system). 8 b)Wall Cladding - Single skin system proposed withapproved color coated sheet of 0.50 mm total coated thickness (TCT) of 550 MPA strength. 8 c) Sheeting Fasteners: - Standard fasteners shall be self-tapping Zinc plated metal screws with EPDM bonded ZINC plated washers. All screws shall be color coated to match roof and wall sheeting. 9)Canopy Top sheet , flashings, sides & Soffit - 0.5mm Thk.- PPGL Sheeting with 550 MPA strength. 10) All accessories for roofing & wall cladding should include Flashings, Gutter & Downtake Pipes in quoted price. 11)Lifeline(MT & T, Konark or Karam make)onroof walkway 12)02 nos glass pivoted doors with AL/MS frame, Complete:2.00 m x 2.40 m and 01 nos glass pivoted doors with AL/MS frame, Complete:2.00 m x 3.00 m 13) 2.06m x 3.00m Windows with MS / Aluminium frame andpowder coated sheet metal louvres on top and bottom with fixed glass panel in the middle as per Architectural plans. |
| 4 | Rate should be inclusive of welding/ fixing of PEB members with Precast members as per drawing to the complete satisfaction of Engineer In Charge. Structural Paint: - All Primary members shall be supplied with factory applied one coat of zinc chromate red oxide primer finished at site as per finish paint specifications. Shop primer provides protection for elements while in transit and construction, and is not intended to be permanent protection. for finish paint it is recommended to apply 2 coats of synthetic enamel paint in to be applied at site by spray painting method. Rate should be inclusive of welding/ fixing of PEB members with Precast members. 14) Indoor lighting including badminton court 150W LED inclined lights of Philips + LT Company + WIPRO maketo achieve 1000 lux evenly across each portion of each court with complete wiring, switches, control gears and control panel. Note: This item does include the (i) required size of electrical outdoor control panels & LT power cables(for internal as well as required for tapping from existing feeder pillar located within 100 m distance), porch(entries/exits) lighting arrangements, external peripheral lighting at every 15m interval for adequate illumination of all around the structure, store area lighting etc. |
| 5 | Supplying and fixing of PUF panels of 30 mm thickness, with microribbed / superribbed finish of RAL 9006 or 9002 of approved colour on horizontal as well as vertical surface as per direction of Engineer in charge, horizontally cladded of 1m height and cut to make length as per design with all accessories and supporting structure. Fixing as per manufatcurer’s guidelines. |
| 6 | Internal 1 mm MS sheet panels with CNC cut graphics and Duco painted mounted on a MS frame of 50 x 50 mm as per design along the longer walls cladded on the inner face of the PEB external cladding sheets as per the Architectural drawings. |
| 7 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 8 | Horizontal seatsand vertical cladding : 25mm thick Superior class teak wood on the top with under layer of 19mm thick green platinum plyor equivalent. The item includes polishing,finishing,adhesives,teak wood beading, nails etc. all complete job as per the site requirement & in accordance with the direction of Engineer-in-charge. |
| 9 | Net and Poles: Supply of Nets and Posts pairs for all 4 courts as per BWF specification with one additional spare post"s pair as well as net |
| 10 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 11 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 12 | Pre – construction anti-termite treatment to buildings/ structures with water emulsified chemicals as per IS: 6313 – Part 2 (latest revision). The Work shall be carried out by an approved specialized sub-Vendor having experience of anti-termite treatment work.Including the cost of all materials, tools and labour involved in the operations including all safety measures, making holes and refilling and making good the same |
| 13 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. |
| 14 | 1:3:6 (1 Cement : 3 coarse sand (zone-lll) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 15 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 16 | Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. Concrete of M25 grade with minimum cement content of 300 kg /cum |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 18 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 19 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 20 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand) |
| 21 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 22 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm |
| 23 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer in-Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 |
| 24 | Trimix or equivalent system including the side formwork channels, levelling to the specified accuracy, screed board vibration, vacuum de-watering, Power floating, troweling, making concrete joints, etc. complete with necessary reinforcement steel, floor hardener and groove cutting with filling |
| 25 | Cutting construction and dummy joints of the concrete slabs by mechanical saw cut means up to required depth and width as directed by the Engineer & Dressing the transverse & longitudinal joints of concrete slabs with polysulfide sealant confirming to BS 5212 (Part 2) including cleaning the joints and ramming, etc |
| 26 | Providing & laying non shrink grout in 1:2 cement: coarse sand mortar for machinery/equipment installation, steel column supports, anchor bolt installation, pockets of machine/ equipment foundations, etc. Rate to include for necessary formwork, tools, finishing the edges, curing and wastage. Measurement shall be on m3 basis of the net volume grouted. |
| 27 | Only Fixing in position holding down bolts as shown in drawings. Bolts shall be fixed in position by making pockets or by means of vendor supplied templates. Bolts shall be placed and fixed securely in position and level as shown while pouring of foundation/pedestal concrete. Rate to include for providing any temporary arrangement of steel/ other material – to keep the assembly of Bolt in position and shall also include for maintaining the projected portion of the Bolt and coating the threads of the Bolt with grease, till erection of the Structure is taken up. Measurement shall be on unit basis. |
| 28 | Supply, Installation, Testing, and Commissioning of turbo ventilator(wind-powered air turbo ventilator) with the following specifications: > Size: 610 mm (24" throat dia) >Number of wings: 42 numbers > Weight: 5.5 kg for head and 5.5 kg / 5.8 kg for FRP/polycarbonate base. > Fan blade ; Aluminium alloy .5 mm thick. > Top plate: Aluminium alloy 1 mm thick. > Connecting Rods: 15 mm dia high carbon steel galvanized support Bottom ring |
| 29 | SS units brassings of galvanized carbon steel of 2 mm thick. > Rotary axle: Integral bearing housing FRP/Nylon high grade. > Fan blade OD: 813 mm (32" maximum dia) >Blade mounting inner ring: Aluminium 1.2 mm > Static Balancing: Spider of SS with 6mm high carbon steel galvanized. >Bearing: 6000 ZZ / 622 ZZ self-lubricating 2 numbers >UV stabilized base plate size & and thickness: UV stabilized FRP/polycarbonate 1.8 m (L) X as per profile (W) from 2 mm sheet. >Warranty: 5 years against any manufacturing defect. >Complete in all respect including all required accessories, mountings, installation, testing, commissioning, molded to suit the roof sheet profile for ensuring leakproof installation, all complete job & as per direction of Engineer-in-Charge. |
| 30 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern |
| 31 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 32 | Name plate and signage as per the site requirement and direction of the Engineer-in-Charge. Made up with SS and florescent material. |
| 33 | SITC of commercial water purifier of AG pure chill 80 L/Hrdischarge with SS RO+UV of eureka forbes or equivalent |
| 34 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS : 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in-charge INTERNAL WORK - EXPOSED ON WALL |
| 35 | 1620 (20 mm OD) pipe |
| 36 | 2025 (25 mm OD) pipe |
| 37 | Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS : 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc. |
| 38 | 1216 (16 mm OD) pipe |
| 39 | 1620 (20 mm OD) pipe |
| 40 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall |
| 41 | 25 mm nominal dia Pipes |
| 42 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVCsolvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 43 | 15 mm nominal dia Pipes |
| 44 | 20 mm nominal dia Pipes |
| 45 | 25 mm nominal dia Pipes |
| 46 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 47 | 20 mm nominal bore |
| 48 | 25 mm nominal bore |
| 49 | Providing and fixing & painting, uPVC pipes 6Kg/cm2 (IS: 4985) including all fittings (plain or door) to perform the job e.g. bends, junction, cowls, offsets, access pieces, jointing with rubber ring/solvent cement joints including cutting chase or holes in wallsfloors and making good where required. inclusive of clamps/clips for fixing (for rain water pipe,waste pipes, ASP pipe & other required locations as directed and at inside or outside the building) all complete job and as per the Engineer-in-charge : |
| 50 | 40 mm OD |
| 51 | 75 mm OD |
| 52 | 110 mm OD |
| 53 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge |
| 54 | Providing and fixing Urinal Hindware make of model Venenzia standard CAT no. 60012 or equivalent consists of concealed water spray holes which makes the process of flushing easy, high durability, scratch resistant with angular stop cock with flange of CAT No. SOL-6053 of Jaguar or equivalent make including all requisite fittings, C.P. brass waste coupling, Bottle trap, spreader and brackets, cutting/core cutting and making good the openings wherever required all complete job & as per the direction of Engineer-in-Charge. |
| 55 | Providing & Fixingof Counter Top wash basin of Jaquar make (model no. JDS-WHT-25909) or equivalent with required waste coupling (Model no. ALD-729L130) or equivalent and bottle trap (model no. ALD-769L300*190) or equivalent etc. basin mixer of approved quality (having 450mm flexible hose for easy regulation of water flow and temperature, single hole installation, Casting:100% virgin Brass Ingots certified for 63% copper to ensure flawless casting Chrome Plating: Robotic electroplating for everlasting lustrous shine with Dimensions: 26x16x14cm Weight: 2kg) of CAT no OPP-CHR-15005BPM or equivalent make, including all requisite fittings, CP brass waste coupling, Bottle trap and brackets, cutting and making good the openings wherever required all complete job & as per the direction of Engineer-in-charge. |
| 56 | Providing and fixing hand shower ( health faucet) with 1 meter long easy flex tube in chrome finish and wall hook with N.R.V. (backflow preventer) of CAT No. T9961A1 of parryware or equvalent make , including all requisite fittings and making good the openings wherever required all complete job & as per the direction of Engineer-in-charge |
| 57 | Providing and fixing 600 mm long single towel rail CAT no. AKP 3571P of Jaguar or equivalent make, including all requisite fittings and making good the openings wherever required all complete job & as per the direction of Engineer-in-charge |
| 58 | Providing and fixing shower basket large of CAT No. ACN-1179N of Jaguar or equivalent make, including all requisite fittings and making good the openings wherever required all complete job & as per the direction of Engineer in charge. |
| 59 | Providing and fixing toilet paper holder : C.P. brass |
| 60 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 61 | Providing and fixing wall mixer with provision for overhead shower with 115 mm long bend pipe on upper side, conneting legs & wall flanges of CAT No. SOL-6273UPR of Jaguar or equivalent make, including all requisite fittings and making good the openings wherever required all complete job & as per direction of Engineer in charge. |
| 62 | Providing and fixing overhead shower 150x15 mm square shape single flow (body and face plate brass with chrome plated) with rubit cleaning system with shower arm 400x25x25 mm square shape with flanges of CAT No. OHS-1805 & SHA-455L400 of Jaguar or equivalent make, including all requisite fittings and making good the openings wherever required all complete job & as per the directionof Engineer-in-charge. |
| 63 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm |
| 64 | Supply & fixing of 300 ml manually operated wall mounted top push soap dispenser of Approved sample (Make/ Model: Dolphy DSDR0134 or equivalent) made up of ABS transparent/ semitransparent plastic including necessary fixing arrangements etc. all complete as per the direction of Engineer-in-Charge. |
| 65 | Providing and fixing SWR Moulded / uPVC Nahani trap or Multifloor trap or other required type of trap with or without jali of required size self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors along with sealing joints (if any), wter proof grouting and providing due support/encasing as per requirement of site all complete job & as per the direction of Engineer-in-charge |
| 66 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 67 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to 1S: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, wall/dado laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). |
| 68 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. |
| 69 | Area of slab upto 0.50 sqm |
| 70 | Area of slab Over 0.50 sqm |
| 71 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. |
| 72 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. |
| 73 | White Agaria Marble Stone |
| 74 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 75 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 76 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 77 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 78 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 79 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 80 | Providing & fixing of SS 304 heavy duty Connection Pipe for washbasin/Hot and cold water/geyser Connection Pipe/Basin Mixer Connection Pipe,etc of required length with all necessary fittings complete as per the direction of Engineer In-charge. |
| 81 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 : 25 mm nominal bore with MTA & reducer complete. |
| 82 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm |
| 83 | Providing & Fixingof two way bib cock of Jaquar make (model no. ALI-CHR-85041) etc. all complete as per direction of Engineer-in-Charge |
| 84 | Providing and fixing torsion spring plank ceiling system Hunter Douglas make of approved finish comprising of plank of 600mm wide and 1200 mm long manufactured out of 0.9mm thick aluminium alloy 3105 perforated 1.5 mm dia with 22% open area. The metal ceiling panels shall be downward accessible with a minimum of four torsion springs per panel. The plank willl be manufactured on advanced CAD/CAM equipment that includes several leveling stages in the manufacturing process. Torsion spring panel with two side legs die formed and two end legs die formed and punched to receive torsion springs. Planks will be square edged. The metal ceiling panels shall be downward accessible with a minimum of four torsion per panel. The plank shall be polyester powder coated in design colour. All comlete as per drawing, specification and direction of Engineer in charge. All ceiling products shall adhere to Green Pro Certification. The metal ceiling is tested for seismic Zone V compliance as per IS 1893 part 1-2016 Main Runners: 24 mm deep, inverted Tee section, 3.6 long, with factory punched flanges to receive totsion spring assembly. Main Tee on centre spacing to match panel Length. |
| 85 | Cross Runner:24 mm deeo, inverted Tee section designed to interlock in to web of main tee section on designed spacing. Cross tee length to match panel length Cross tees are spaced spacing 1200 mm on center maximum. Suspention System: As per manufacturer standard considering type of plenum and its height. Paint finish: The panels will be trated in latest nano technology process and electro statically powder coated with automatic caronal syated and cured with gas catalystic technology. Acoustic Felt (optional):Non woven felt made of glass reinforced fiber glued over the perforation for sound absorpation. NRC 0.7 Approved make: Hunter Douglas, SASm Gordan |
| 86 | A) Supply and installation of Merino Besco TITAN or equivalent 12mm BOX UP series cubicles of width and depth as per specifications/site drawings/Site requirement Cubicle height to be 2100mm. B) Made from solid grade compact high-pressure laminate as per IS:2046 and EN 438 manufactured under high specific pressure > 5 MPa and temperature 120°C with bunch of kraft papers impregnated with thermosetting phenolic resin and decorative papers made of cellulose fiber impregnated with thermosetting melamine resin which provide superior scratch, abrasion, heat, chemical, impact, graffiti & moisture resistance along with anti-bacterial properties. Panels have a black core that when machined, presents a distinctive black edge. Doors: All doors will be of single colour and made of 12 mm thick Merino or equivalent HPL compact panel. The doors will have chamfered edges. Each door will be supported by 3 stainless steel made hinges affixed to the pilasters. Stainless steel made coat hook and stainless steel door knob are provided with each door. All the doors will be routed at the vertical ends and the rubber sponge lining will be incorporated at the routed ends. |
| 87 | Pilasters: All pilasters will be made of 12 mm thick Merino HPL or equivalent compact panel with chamfered edge and completed with stainless steel made lock set(comprises of thumb turn and occupancy indicator). Pilasters will be anchored to the floor using steel made L brackets and box up fixtures are used for covering the floor anchored mechanism. All pilasters will be routed at their vertical ends to facilitate closure of doors. Dividers: All intermediate partitions or dividers will be made of 12 mm thick Merino HPL or equivalent compact laminate panels. They are affixed with stainless steel made U-channel at their ends for ultimate stability of the system. Design no. as specified by Arch. / Engr. in suede finish. Size of panels to be as per drawing/as per site requirement and direction of Engineer-in-Charge. |
| 88 | C) • Top rail is made of stainless steel grade 304. A thin plastic film pasted for surface protection. Dimension is 55mmx42mmx1.6 mm. • Corner joinery section made from Stainless steel grade 304. Surface finish to be brush type. A thin plastic film pasted for surface protection. Size to be 35mmx15mmx0.8 mm. • Wall joinery section with hamming profile made from Stainless steel grade 304. Surface finish to be brush type. A thin plastic film pasted for surface protection. Size to be 21mmx16mmx0.8 mm. • Fixed front panel to be anchored to floor with L Bracket of SS 316 and covered with SS 316 Grade Box Type plate from all directions with 100mm clear Height from ground. Surface finish to be matt type. |
| 89 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc complete |
| 90 | Providing and fixing chromium plated brass handles of approved quality including necessary screws etc complete |
| 91 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 92 | Providing and fixing of vanity counter of required size made up of 18mm thick fire retardent ply as per IS:5509 both side 1 mm thick fire retardent laminated fixing all accessories set for each wash basin. |
| 93 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 94 | Supplying & fixing of 1 No. 6/13 Amp International UPS modular socket (shuttered) outlet Controlled by 1 No. 1 way single pole 6/13 amps modular type switch, polycarbonate white cover plate andearthing the 3rd pin painting etc. as required. |
| 95 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 96 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 97 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 98 | 6 way (4 + 18), Double door |
| 99 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 100 | Single pole |
| 101 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 102 | 63 A |
| 103 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 104 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 105 | Supplying and fixing of Deluxe fresh air fan with louvers (ventilating fan ) with self closing louvers of decorative PVC blades mounting square frame of approved make complete with all necessary material as required |
| 106 | 200mm RPM1300/1400 Min. |
| 107 | Supply, Installation, Testing and commissioning ofIndoor LED Strip, 25W, 24V DC Make: Jaquar, Model No. LSTP03X005XW or equivalent in Philips, Crompton Greaves, Bajaj, Wipro, havells etc.Complete with all accessories. (1 Set=5 Mtr.) |
| 108 | Supply, Installation, Testing and commissioning of Energy efficient recessed mounted LED luminaire suitable for 2x2 grid ceiling complete with driver etc as required. Make: Wipro Model No.CRCO10R036HP57G2 or equivalent in Philips, Crompton Greaves, Bajaj, Jaquar, havells etc. |
| 109 | Led luminiare 2" X 2", 36W, 4-6.5K, Model No. CRCO10R036HP57G2 or equivalent |
| 110 | Supply, Installation, Testing and commissioning ofWall Mirror Light Complete with all accessories. 8W/9W LED, 5000KMake: Jaquar Model No. KWB-CHR-MB48012A or equiin Philips, Wipro, Crompton Greaves, Bajaj, Havells etc. |
| 111 | Supply, Installation testing, commissioning of 35 Ltr, 5 Star, Electric Geyzer Including SS flexible connection pipes and complete accessories as per site requirement & direction of Engineer-In-Charge. |
| 112 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 113 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Group C) |
| 114 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in Surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (Group C) |
| 115 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 116 | 25 mm |
| 117 | 32 mm |
| 118 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 119 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 120 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 121 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 122 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 123 | 4 x 16 sq. mm + 2 x 6 sq.mm |
| 124 | Supply, Installation testing, commissioning of Fast energy efficient HEPA–filtered hand dryer of Model No. DYSON 9KJ of DYSON make or equivalent in other makes having specifications detailed below and complete accessories as per site requirement & direction of Engineer-In-Charge. • 10–12 second dry time •Touch free operation • Hygienic performance with HEPA filter •HEPA filer captures 99.97%of particles as small as 0.3 microns from the air • Max and Eco mode available • Sheets of air travelling at 624 km/h follow the contours of your hands, removing water in less time. • hand dryer features silencers made from open-cell foam and perforated discs, reducing noise as airflow passes through the motor. • Spins 75,000 times a minute to quickly and hygienically dry hands. • produes upto 88% less CO2 emissions than single use paper towels • 5-year parts warranty, easy self-service |
| 125 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
