Military Engineer Services-MES has published Tender For Repair To Wooden Furniture And Re Canning Of Chairs Under Ge (W) Agra. Submission Date for this Tender is 07-05-2024. Wooden Furniture Tenders in agra Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 16-Apr-2024 | Corrigendum | Other | 30-04-2024 |
| 2 | 30-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-05-2024 |
| Sl. No. | Item Description |
| 1 | Hard Bed wooden (FD) ;- Removing of old u/s parts and S&F in repair following parts of as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed Engr in-Charge. |
| 2 | Head rest |
| 3 | Foot Rest |
| 4 | Long rails shall be made of Ist class hard wood (Teak) |
| 5 | Short rails shall be made of Ist class hard wood (Teak) |
| 6 | Stiffener shall be made of Ist class hard wood (Teak) |
| 7 | MS bracket of flat iron 25x3mm,200mm long fixed with screw |
| 8 | Ply wood top 12mm thick BWR type as per existing shapeand size in One piece |
| 9 | M&L for polishing of bed Ply wood top with melamine polish to all exposed surfaces except top & bottom after preparation of surfacescomplete all as specified and directed Engr in-Charge. |
| 10 | DINING CHAIR :- Removing of old u/s parts and S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing ccomplete all as specified and directed Engr in-Charge. |
| 11 | Rear Legs |
| 12 | Front Legs |
| 13 | Side rail of seat frame includingdrilling holes for weaving (spacing of holes shall be as per existing) |
| 14 | Front/back rails of seat frame including drilling holes for weaving (spacing of holes shall be as per existing) |
| 15 | Bottom stiffener |
| 16 | Back stiffener |
| 17 | Taking out old u/s cane from chair dining and re-canningwith new 2 mm wide half round Godrej pattern white plastic cane and border shall be woven with new 4 mm half round plastic cane of superior quality complete all as specified and directed. |
| 18 | M&L for polishing of chair dining with melamine polish to all exposed surfaces except inside of seat frame ( 4 sides) incl matching with new component with old one after preparation complete all as specified and directed. |
| 19 | CHAIR WRITING (FD-20(M)/202/280) :- Removing of old u/s parts and S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed Engr in-Charge. |
| 20 | Rear legs |
| 21 | Front Legs |
| 22 | Side rail of seat frame including drilling holes for weaving(spacing of holes shall be as per existing) |
| 23 | Front/Back rails of seat frame including drilling holes for weaving(spacing of holes shall be as per existing) |
| 24 | Bottom stiffener |
| 25 | Back stiffener |
| 26 | Arm rest |
| 27 | Taking out old u/s cane from chair writing and re-canningwith new 2 mm wide half round Godrej pattern white plastic cane and border shall be woven with new 4 mm half round plastic cane of superior quality. complete all as specified and directed Engr in-Charge. |
| 28 | M&L for polishing of chair writing with melamine polish to all exposed surfaces except inside of seat frame (4 sides) incl matching with new component with old one after preparationcomplete all as specified and directed Engr in-Charge. |
| 29 | CHAIR EASY:- Removing of old u/s parts and C15S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed Engr in-Charge. |
| 30 | Rear Legs |
| 31 | Front Legs |
| 32 | Side Rails |
| 33 | Front/Back Rails |
| 34 | Back Stiffener |
| 35 | Bottom Stiffener |
| 36 | Arms rest |
| 37 | Taking out old u/s cane from chair writing and re-canningwith new 2 mm wide half round Godrej pattern white plastic cane and border shall be woven with new 4 mm half round plastic cane of superior quality. complete all as specified and directed Engr in-Charge. |
| 38 | M&L for polishing of chair easy with melamine polish to all exposed surfaces except in side of seat frame(04 sides) incl matching with new components with old one after preparation complete all as specified and directed Engr in-Charge. |
| 39 | TEAPOY : Removing of old u/s parts and S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed Engr in-Charge. |
| 40 | legs |
| 41 | long rail |
| 42 | short rail |
| 43 | side stiffener |
| 44 | Taking out old u/s top and S&F new top of made of 18/19mm thick mdf board with 0.8mm thick lamination sheet both side lamination duly post formed with industrial grade superior specificationcomplete all as specified and directed Engr in-Charge. |
| 45 | M&L for polishing of teapoy with melamine polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed Engr in-Charge. |
| 46 | SIDE BOARD: Removing of old u/s parts and S&F in repair to the following parts as per existing shape and size duly planned complete all as specified and directed Engr in-Charge. |
| 47 | Top |
| 48 | Bottom |
| 49 | Side |
| 50 | Shelves |
| 51 | Drawer shall be made of 6mm thick commercial plywood with 18mm thick pre-laminated particle board front |
| 52 | Shutter with 40mm size knob |
| 53 | Back shall be made of 6mm thick commercial plywood. |
| 54 | Bottom frame with 4 Nos of legs shall be made of Ist class hard wood (teak) |
| 55 | M&L for polishing of side board with melamine polish on all exposedsurfaces except topand bottom incl after preparation of surfaces complete all as specified and directed |
| 56 | TABLE DRESSING GENTS;-Removing of old u/s parts and S&F in repair to the following parts as per existing shape and size duly planned complete all as specified and directed Engr in-Charge. |
| 57 | Looking Glassof 5mm thick as per existing shape and size. |
| 58 | Back ply of class and fixing 6mm thick Commercial plywood of existing shape & size |
| 59 | Drawer of 6 mm thick ply wood commercial as per existing shape and size |
| 60 | Top of table drsessing gents of 18mm th pre-laminated particle board as per existing shape & size. |
| 61 | M&L for polishing of Table dressing Gents with melamine polish on all exposedsurfaces except topand bottom incl after preparation of surfaces complete all as specified and directed |
| 62 | TABLE DRESSING LADIES;- Removing of old u/s parts and S&F in repair to the following parts as per existing shape and size duly planned complete all as specified and directed Engr in-Charge. |
| 63 | Looking glass of 5mm thick as per existing shape and size. |
| 64 | Back ply 6mm thick Commercial plywood of existing shape & size |
| 65 | sliding glass 3mm thick as per existing. |
| 66 | Top of table dressing ladies of 18mm th pre-laminated particle board as per existing shape & size. |
| 67 | Legs of ist class hard wood (teak) |
| 68 | Drawer of 6 mm thick ply wood commercial with front 18mm pre-laminated particle board as per existing shape and size |
| 69 | M&L for polishing of Table dressing Ladies with melamine polish on all exposedsurfaces except topand bottom incl after preparation of surfaces ccomplete all as specified and directed Engr in-Charge. |
| 70 | TABLE BED SIDE Removing of old u/s parts and S&F in repair to the following parts with 18mm prelaminated particle board exterior grade teak face as per existing shape and size duly planned complete all as specified and directed Engr in-Charge.:- |
| 71 | Top |
| 72 | Side |
| 73 | Shelf |
| 74 | Bottom |
| 75 | Back shall be made of 6mm thick ply wood commercial. |
| 76 | 1st class hard wood (teak) frame with 4 nos of legs duly melamine polish. |
| 77 | TABLE PEG:- Removing of old u/s parts and S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed Engr in-Charge. |
| 78 | Legs |
| 79 | Long rail |
| 80 | Short rail |
| 81 | Side stiffener |
| 82 | Taking out old u/s top and S&F new top of made of 18/19mm thick mdf board with 0.8mm thick lamination sheet both side lamination duly post formed with industrial grade superior specification complete all as specified and directed Engr in-Charge. |
| 83 | M&L for polishing of table Peg with melamine polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed. |
| 84 | TABLE 900mm X 600mm WITH DRAWERRemoving of old u/s parts and S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed:- |
| 85 | Legs |
| 86 | Long rail |
| 87 | Short Rail |
| 88 | Bottom Side stiffener |
| 89 | Bottom centre stiffener |
| 90 | Drawer with 6mm th commercial ply at bottom only and sides, back shall be 12mm th Ist class hard wood (teak) with knob. |
| 91 | Taking out old u/s top and S&F new top of made of 18/19mm thick mdf board with 0.8mm thick lamination sheet both side lamination duly post formed with industrial grade superior specificationcomplete all as specified and directed Engr in-Charge. |
| 92 | (h) M&L for polishing of table 900x600mm with drawer with melamine polish on all exposed surface except top & Bottom incl matching new components with old one after preparation of surface complete all as specified and directed Engr in-Charge. |
| 93 | TABLE 900mm x 600mm WITH OUT DRAWER:-Removing of old u/s parts and S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed Engr in-Charge. |
| 94 | Legs |
| 95 | Long Rail |
| 96 | Short Rail |
| 97 | Bottom Side stiffener |
| 98 | Bottom Centre stiffener |
| 99 | Taking out old u/s top and S&F new top of made of 18/19mm thick mdf board with 0.8mm thick lamination sheet both side lamination duly post formed with industrial grade superior specification complete all as specified and directed Engr in-Charge. |
| 100 | M&L for polishing of table900x600mm w/o drawer with highclass melamine polish on all exposed surface except top& Bottom incl matching new components with old after preparation of surface complete all as specified and directed Engr in-Charge. |
| 101 | TABLE CENTRE:-Removing of old u/s parts and S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed:- |
| 102 | legs |
| 103 | long rail |
| 104 | short rail |
| 105 | side stiffener |
| 106 | Taking out old u/s top and S&F new top of made of 18/19mm thick mdf board with 0.8mm thick lamination sheet both side lamination duly post formed with industrial grade superior specification complete all as specified and directed Engr in-Charge. |
| 107 | M&L for polishing of Table Centre with melamine polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed Engr in-Charge. |
| 108 | TABLE DINING 06/08 PERSON :-Removing of old u/s parts and S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed Engr in-Charge.:- |
| 109 | Taking out old u/s top and S&F new top of made of 18/19mm thick mdf board with 0.8mm thick lamination sheet both side lamination duly post formed with industrial grade superior specificationcomplete all as specified and directed Engr in-Charge. |
| 110 | Legs |
| 111 | Long rail |
| 112 | Short rail |
| 113 | Stiffener |
| 114 | M&L for polishing with melamine polish on all exposed surfaces except top & bottom complete all as specified and directed Engr in-Charge. |
| 115 | RE-CANNING:-Taking out old u/s cane from chairs etc and re-canning of Bin solied linen, Couch etc with new 2 mm wide half round Godrej pattern white plastic cane and border shall be woven with new 4 mm half round plastic cane of superior quality. complete all as specified and directed Engr in-Charge. |
| 116 | Chair Dining JCO/ORsRemoving of old u/s parts and S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed by Engr-in-charge :- |
| 117 | Front legs |
| 118 | Rear legs |
| 119 | Front rails |
| 120 | Side rails |
| 121 | Back rails |
| 122 | Back rest |
| 123 | Stiffeners |
| 124 | PVC Seat 4mm thick with holes screwed with rails. |
| 125 | New nylon buffers on legs. |
| 126 | M&L for polishing with melamine polish on all exposed surfaces except top & bottom complete all as specified and directed. |
| 127 | Chair Dining OfficersRemoving of old u/s parts and S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed by Engr-in-Charge :- |
| 128 | Curved back restof size 25X45mm. |
| 129 | Vertical stripsof back restof size 15X30mm. |
| 130 | Back rail of back restof size 25X90mm. |
| 131 | Front and rear legs of size 35X50mm. |
| 132 | Stiffner of size 20X25mm. |
| 133 | Front and side rail of size 25X65mm. |
| 134 | Stopper of size 75X75X25mm fixed with main frame and legs. |
| 135 | Cushion seat foam of75mm thick 40 Density covered with coloured fabric as approved. |
| 136 | Seat bottom of 12mm thick BWR Phenol bonded plywood . |
| 137 | Nylon buffers on legs. |
| 138 | M&L for polishing with melamine polish on all exposed surfaces except top & bottom complete all as specified and directed. |
| 139 | Sofa set Five/Four seater : Removing of old u/s parts and S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed by Engr-in-Charge :- |
| 140 | Seat Rails Right and leftof Sofa set (Single/Three Seater) |
| 141 | Seat Rails Front and Back of Sofa set (Single Seater) |
| 142 | Rails of back frame Top and bottom of Sofa set (Single Seater) |
| 143 | Back and bottom support of Sofa set (Single Seater) |
| 144 | Long rails of seat front and back of Sofa set (Three Seater) |
| 145 | Long rails of Back frame Top and bottom of Sofa set (Three Seater) |
| 146 | Long Back and bottom support of Sofa set (Three Seater) |
| 147 | Legs of Sofa Single seater/Three seater |
| 148 | Arms of Sofa set. |
| 149 | Bearers of Seat and Back rest of Sofa set. |
| 150 | S&F of cushion foam for sofa set size 525x525x100mm, 40 density duly covered with best quality tapestry cloth complete all as directed and specifiedNote:-Rate of tapestry cloth shall not be less than Rs 550- per RM |
| 151 | Material & Labourfor polishing of two coats of melamine polish internal and external to the Sofa Set 5 seater including cleaning and preparing the old surfaces complete all as specified and as shown on drgs and as directed. |
| 152 | All as per item no 18 (m) here-in-before but for Sofa set 4 seater. |
| 153 | Table Bed side (MAP) :Removing of old u/s parts and S&F in repair following parts as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directedby Engr-in-Charge. |
| 154 | Top of 18mm prelaminated particle board with PVC edging of size 450X450 mm fixed to steel frame with 25mm projection on three sides. |
| 155 | Bottom portion of upper and lower drawers of 6 mm BWR Gr commercial plywood. |
| 156 | Front portion of upper drawers with 18mm prelaminated particle board with PVC edging screwed to 12 mm plywood. |
| 157 | Front portion of lower drawers with 18mm prelaminated particle board with PVC edging screwed to 12 mm plywood. |
| 158 | Sides of upper drawers of 12 mm BWR Gr commercial plywood. |
| 159 | Sides of lower drawers of 12 mm BWR Gr commercial plywood. |
| 160 | 1st class hard wood teak runner of 25X20 mm of upper and lower drawers. |
| 161 | 1st class hard wood teak wood stopper of 25X20 mm of upper and lower drawers. |
| 162 | Frame work made of 18 mm MS square pipe (18 Gauge) powder coated with black colour enamel paint. |
| 163 | Back with 6mm plwood inside the top frame work. |
| 164 | Handle of upper and lower drawers as per approved sample. |
| 165 | Rubber Shoes for legs as per approved sample. |
| 166 | M&L for paintin with black enamel paint to all MS portion complete all as specified and directed. |
| 167 | Table Dressing Ladies with Stool :Removing of old u/s parts and S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed by Engr-in-Charge :- |
| 168 | Looking mirror of size 1230 x 425 mm & 5mm thick |
| 169 | Frame and back support of the mirror including back side with 6 mm thick commercial plywood |
| 170 | Top of size 380x350/450mm made out of 18mm thick pre-laminated particle board incl4mm thick Teakwood beading on all exposed sides of top. |
| 171 | Drawers made out of 12 mm thick commercial plywood with 18mm thick pre-laminated particle board teak faced front portion providing 4mm thick Teakwood beading on all exposed sides and provided with stainless steel moving telescopy. |
| 172 | Shutters made of 18mm thick pre-laminated particle board teak facedproviding 4mm thick Teakwood beading on all exposed sides fixed to the frame with SS piano hinges. |
| 173 | 50 mm Long "D" shaped Stainless Steel handle. |
| 174 | Magnetic catcher for shutters. |
| 175 | Side of stool made of 18mm thick pre-laminated particle board teak facedproviding 4mm thick Teakwood beading on all exposed sides. |
| 176 | Openable shutter of dressing stool made out of 12 mm thick commercial plywood fitted with MS folding Handle. |
| 177 | 50 mm dia heavy duty revolving nylon wheel of stool. |
| 178 | 75 mm thick foam cushion 40 density of make covered with superior quality tapestry duly stiched on four sides making good shape (Tapestry cloth not less than Rs.400/- per mtr) colour & pattern as approved by GE/Engr-in-Charge. |
| 179 | Material & Labourfor polishing of two coats of melamine polish of best quality to the table after preparation of old surfaces as specified and as directed. |
| 180 | Hat Stand ; Removing of old u/s parts and S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed Engr in-Charge.:- |
| 181 | Looking mirror of size 300 x 440mm & 5mm thick |
| 182 | 4 mm thick plywood one side teak face on front of size 1000 x 710 mm |
| 183 | Aluminium Pegs 100 mm long |
| 184 | Teak wood edging of size 6 x 35 mm alround the hat stand |
| 185 | Men & Labour for polishing of two coats of melamine polish of best quality to the table after preparation of old surfaces as specified and as directed. |
| 186 | LOCKER BED SIDE WOODEN :- Removing of old u/s parts and S&F in repair following parts as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed Engr in-Charge.:- |
| 187 | Shutter of 18 mm thick teak pre-lamintaed particle board one side teak wood other side white including 4 mm thick TW beading on three side of shutter complete all as specified and directed Engr in-Charge |
| 188 | S & F back & sides with 6mm thick BWR plywood as per existing shape and size complete all as specified and directed Engr in-Charge |
| 189 | S & Fbottom of 1st class hard wood all complete all as specified and directed Engr in-Charge |
| 190 | S & Ftop 18mm thick pre-laminated particle board as per existing shape and size complete all as specified and directed Engr in-Charge |
| 191 | S & Fpartition wall of 2nd class hard wood complete all as specified and directed Engr in-Charge |
| 192 | S & Fnew self 15mm thick of 2nd class hard wood complete all as specified and directed Engr in-Charge |
| 193 | Bottom Frame with Legs |
| 194 | Hasp and staples 75 mm long aluminium anodized with required size of screw all as specified and directed. |
| 195 | Handle ‘D’ type aluminium anodized 100mm long with required size screw all as specified and directed. |
| 196 | Hinges piano type chromium plated ISI marked with required size of screws all as specified and directed. |
| 197 | S&F of MS conduit pipe 1.5mm dia 20 gauge as per size required all as specified and directed. |
| 198 | M&L for polishing of old/new surfaces internally and externally with melamine polish incl matching with new component with old one after preparationcomplete all as specified and directed. |
| 199 | CHAIR WB :- Removing of old u/s parts and S&F in repair following parts of the with Ist class hard wood (Teak) as per existing shape & size duly planned and finished as shown on drawingcomplete all as specified and directed Engr in-Charge ;- |
| 200 | Rear Legs |
| 201 | Front Legs |
| 202 | Side rails |
| 203 | Front/Back rails of seat |
| 204 | Back stiffener |
| 205 | Bottom stiffener |
| 206 | Seat of 6mm thick BWR copmmercial ply wood complete all as shown in Drg specified and directed. |
| 207 | M&L for polishing of chair wooden bottom without arms with melaminepolish to all expensed surfaces except in side of seat frame(o4 sides) incl matching with new components with old one after preparation complete all as specified and directed. |
| 208 | TABLE 900mm x 900mm:- Removing of old u/s parts and S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed Engr in-Charge:- |
| 209 | Legs |
| 210 | Sides rail |
| 211 | Taking out old u/s top and S&F new top of made of 18/19mm thick mdf board with 0.8mm thick lamination sheet both side lamination duly post formed with industrial grade superior specificationcomplete all as speciified and directed. |
| 212 | M&L for polishing of table 900x900mm with melamine polish on all exposed surfaces except top & Bottom incl matching new components with old one after preparation of surfacecomplete all as specified and directed. |
| 213 | TABLE 1520X860x760MM;-Removing of old u/s parts and S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed Engr in-Charge:- |
| 214 | Legs |
| 215 | Long rail of table frame |
| 216 | Short rail of table frame |
| 217 | Taking out old u/s top and S&F new top of made of 18/19mm thick mdf board with 0.8mm thick lamination sheet both side lamination duly post formed with industrial grade superior specificationcomplete all as specified and directed Engr in-Charge. |
| 218 | M&L for polishing of table 1520x860x760mm with melamine polish on all exposed surfaces except top & bottom incl matching new components with old one after preparation of surfaces complete all as specified and directed Engr in-Charge. |
| 219 | Table WritingRemoving of old u/s parts and S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed Engr in-Charge:- |
| 220 | Taking out old u/s top and S&F new top of made of 18/19mm thick mdf board with 0.8mm thick lamination sheet both side lamination duly post formed with industrial grade superior specificationccomplete all as specified and directed Engr in-Charge. |
| 221 | Legs |
| 222 | Top Rails |
| 223 | Stiffners |
| 224 | Drawers |
| 225 | Shutter of cupboard of size 405 x 335 mm made out of 18 mm thick pre-laminated particle board teak faced and providing CP Knobs and piyano hinges for hanging with the table. |
| 226 | 6 mm thick commercial ply on back of cupboards |
| 227 | Men & Labour for polishing of two coats of melamine polish of best quality to the table after preparation of old surfaces as specified and as directed. |
| 228 | STOOL DRESSING: - Removing of old u/s parts and S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed Engr in-Charge |
| 229 | Legs |
| 230 | Side rails of seat frame including holes for weaving (spacing of holes shall be match with the existing rail). |
| 231 | Front/Back rails of seat frame incl drlling holes for weaving (spacing of holes shall be match with the existing rail). |
| 232 | Re-canningwith new 2 mm wide half round Godrej pattern white plastic cane and border shall be woven with new 4 mm half round plastic cane of superior quality. complete all as specified and directed Engr in-Charge. |
| 233 | M&L for polishing of old/new surfaces with melamine polish to all exposed surfaces complete all as specified and directed Engr in-Charge |
| 234 | TABLE OFFICE CLERK/TYPIST Removing of old u/s parts and S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed:- |
| 235 | Legs |
| 236 | Long rail |
| 237 | Short Rail |
| 238 | Bottom Side stiffener |
| 239 | Bottom centre stiffener |
| 240 | Drawer with 6mm thick commercial ply at bottom only and sides, back shall be 12mm thick Ist class hard wood (teak) with knob. |
| 241 | Taking out old u/s top and S&F new top of made of 18/19mm thick mdf board with 0.8mm thick lamination sheet both side lamination duly post formed with industrial grade superior specificationcomplete all as specified and directed Engr in-Charge |
| 242 | M&L for polishing of table office clerkwith melamine polish on all exposed surface except top & Bottom incl matching new components with old one after preparation of surface complete all as specified and directed Engr in-Charge |
| 243 | TABLE OFFICE OFFICERRemoving of old u/s parts and S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed:- |
| 244 | Legs |
| 245 | Long rail |
| 246 | Short Rail |
| 247 | Bottom Side stiffener |
| 248 | Bottom centre stiffener |
| 249 | Drawer with 6mm thick commercial ply at bottom only and sides, back shall be 12mm thick Ist class hard wood (teak) with knob. |
| 250 | Taking out old u/s top and S&F new top of made of 18/19mm thick mdf board with 0.8mm thick lamination sheet both side lamination duly post formed with industrial grade superior specificationcomplete all as speciified and directed. |
| 251 | M&L for polishing of table office officer with melamine polish on all exposed surface except top & Bottom incl matching new components with old one after preparation of surface complete all as directed. |
| 252 | BOOK CASE:- Removing of old u/s parts and S&F in repair following part as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed:- |
| 253 | S&Fshutter of 18 mm thick teak pre-lamintaed particle board one side teak wood other side white including 4 mm thick TW beading on three side of shutter all as specified and directed. |
| 254 | S&F 6mm thick BWR plywood as per existing shape and size all as specified and directed. |
| 255 | S&Fbottom of 2nd class hard wood all as specified and directed. |
| 256 | S&Ftop 18mm thick pre-laminated particle board as per existing shape and size all as specified and directed. |
| 257 | S&Fpartition wall of 2nd class hard wood all as specified and directed. |
| 258 | S&Fself 15mm thick of 2nd class hard wood all as specified and directed. |
| 259 | Bottom Frame with Legs |
| 260 | S&F knobs with required size of screw all as specified and directed. |
| 261 | S&Fhinges piano type chromium plated ISI marked with required size of screws all as specified and directed. |
| 262 | M&L for polishing of old/new surfaces internally and externally with melamine polish incl matching with new component with old one after preparationcomplete all as specified and directed. |
| 263 | Table Computer ; Removing of old u/s parts and S&F in repair following part with 18mm prelaminated particle board teak faced exterior grade as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed:- |
| 264 | Top of existing size made and providing Teakwood beading 4 mm thick all around the top. |
| 265 | Pull out tray with telesacopic channel. |
| 266 | Keyboard tray pullout with telesacopic channel |
| 267 | Drawer with telesacopic channel |
| 268 | Brass knob on drawers. |
| 269 | Shelfs |
| 270 | Buffers and shoes |
| 271 | Men & Labour for painting iron frame oftable after preparation of old surfaces as specified and as directed. |
| 272 | TABLE DINING JCO/Ors PERSON :- Removing of old u/s parts and S&F in repair following part with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed:- |
| 273 | Taking out old u/s top and S&F new top of made of 18/19mm thick mdf board with 0.8mm thick lamination sheet both side lamination duly post formed with industrial grade superior specificationcomplete all as speciified and directed. |
| 274 | Legs |
| 275 | Long rail |
| 276 | Short rail |
| 277 | Stiffener |
| 278 | M&L for polishing with melamine polish on all exposed surfaces except top & bottom complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
