}

Tender For Special Repair Of Road From Main Gate (Rp Gate) To Helipad Ground, Main Gate (Rp Gate) To Rear Gate And Near Csd Canteen To Jcos/Or Md Accn At Nainital Udner Ge Ranikhet, Ranikhet-Uttarakhand

Military Engineer Services-MES has published Tender For Special Repair Of Road From Main Gate (Rp Gate) To Helipad Ground, Main Gate (Rp Gate) To Rear Gate And Near Csd Canteen To Jcos/Or Md Accn At Nainital Udner Ge Ranikhet. Submission Date for this Tender is 02-05-2024. Road Work Tenders in Ranikhet Uttarakhand. Bidders can get complete Tender details and download the document.




Tender Notice

43144050
Corrigendum : Tender For Special Repair Of Road From Main Gate (Rp Gate) To Helipad Ground, Main Gate (Rp Gate) To Rear Gate And Near Csd Canteen To Jcos/Or Md Accn At Nainital Udner Ge Ranikhet
Open Tender
Indian
Uttarakhand
Ranikhet
02-05-2024

Tender Details

Special Repair Of Road From Main Gate ( Rp Gate ) To Helipad Ground, Main Gate ( Rp Gate ) To Rear Gate And Near Csd Canteen To Jcos / Or Md Accn At Nainital Udner Ge Ranikhet

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 25-Apr-2024 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 02-05-2024

Key Value

Document Fees
INR 500 /-
EMD
INR 95900.0 /-
Tender Value
INR 47.95 Lakhs /-

BOQ Items

Name of Work: SPECIAL REPAIR OF ROAD FROM MAIN GATE (RP GATE) TO HELIPAD GROUND, MAIN GATE (RP GATE) TO REAR GATE AND NEAR CSD CANTEEN TO JCOs/OR MD ACCN AT NAINITAL UDNER GE RANIKHET
Sl. No. Item Description
1Surface dressing n exc 15 cm deep in hard/dense soil including cleaning/clearing all shrubs, roots, saplings and wild vegetation complete all as specified and directed.
2M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat with bituminous primer at 5 kg per 10 sq metre VG-10 (Paving bitumen)complete all as specified and directed.
3M&L for premix bituminous, macadam with binder content of 4% by weight of total mix using paving bitumen VG-30 grade, laid/ rolled and compacted to required gradient and camber (consolidated thickness 75mm or less)complete all as specified and directed. Note for item No. 03 & 05 :(i)Aggregates for Bituminous works shall confirm to clause No 20.B.2.5of SSR 2009 Part- I(ii) Based on job mix formula, in case the binder content (i.e. Bitumen) is less than the content specified under these items then a minus adjustment @ Rs 55/- per kg of bitumen (less consumption) shall be applied on the quoted rate of contractor against these items, hence the quoted rate of contractor shall be reduced based on less content of bitumen required as per job mix formula. However, no price adjustment on plus side shall be made for increase of quantity of bitumen in case of required as per job mix formula. (iii) Design Mix for bituminous macadam shall be carried out through an authorised testing lab and the cost of testing shall be included in quoted rate.
4M&L for repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal), complete all as specified and directed.
5M&L for bituminous premix asphaltic dense concrete 30mm consolidated thickness with 5.5% binder content of VG-30 by weight of total mix as in semidense asphaltic concrete rolled and compacted to reqd camber complete all as specified and directed
6M&L for applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T & P, cleaning the road surfaces of all dirt, seals, oil, grease and foreign material etc,complete all as specified and directed.
7Dismantling bricks (laid dry, flat or on edge) or brick tiles in floor, channels, kerbs, aprons etc complete all as specified and directed.
8M&L for continuous brick edging with width equal to the width of the bricks, sub class "B" bricks laid dry on end vertically including necessary excavation & earth workcomplete all as specified and directed.
9Demolition of cement concrete(un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and directed.
10Demolition of brick work or stone/ boulder masonry in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and directed.
11M&L for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.
12M&L for PCC 1:4:8type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.
13M&L for PCC 1:2:4 type B-0 using 12.5 mm graded agregate as in copings complete all as specified and directed.
14M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement in any height, complete all as specified and directed.
15M&L for preparing newly plastered surfaces and applying two coat of cement base paint complete all as specified and directed.
16Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.
17S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufacturers instructions complete all as specified and directed.
18S&F metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.
19Supply and fixing solar cat eye aluminium alloy shall ( 100% water proofing design according to 65) of size 125mmx 125mmx 25mm ( shank 65 mm) of high efficiency mono rystafie solar panel 2.4 V/ 0.3 watt one NI-ed rechargeable battery ( 1.2 V/1600MA) consisting os super bright LED with 10000 to 18000 mcd completed as per manufacturers instructions etc. complete all as specified and directed.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail