Delhi University has published Tender For Making Provision Of Attached Toilet For Study Room, Wooden Cupboard In Office Area, Wooden Tv Panel In Bedroom And Other Repair Works In A-2 ( 29-31) Probyn Road, University Of Delhi.. Submission Date for this Tender is 15-04-2024. Toilet Bathroom Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
2 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
3 | 1:5:10(1cement:5coarsesand(zone-III):10 graded stone aggregate 40 mm nominal size) |
4 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand) |
5 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. |
6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). |
7 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform |
8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
9 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). |
10 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand) |
11 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
12 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
13 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead |
14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood |
15 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. |
16 | Door chowkhats . |
17 | Window chowkhats . |
18 | Clerestory window chowkhats |
19 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood 35 mm thick shutters |
20 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Second class teak wood |
21 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick |
22 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters. With ISI marked stainless steel butt hinges of required size - Second class teak wood |
23 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. |
24 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood 50 x 20 mm |
25 | Providing and fixing bright finished brass door latch with necessary screws etc. complete : 300x16x5 mm |
26 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 150 x10 mm |
27 | Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 200 mm |
28 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. |
29 | 125 mm |
30 | 100mm |
31 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. With cement mortar 1:4 (1cement: 4 coarse sand) |
32 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm. |
33 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
34 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. |
35 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. |
36 | 15 mm dia. nominal bore |
37 | 20 mm dia. nominal bore |
38 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
39 | 15 mm nominal bore |
40 | 20 mm nominal bore |
41 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
42 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
43 | 25 mm nominal bore |
44 | 20 mm nominal bore |
45 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
46 | 15 mm nominal bore |
47 | 20 mm nominal bore |
48 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes,havingthermalstabilityforhot& cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00mspacing.Thisincludesjointing ofpipes & fittingswithonestepCPVCsolventcementand thecostofcuttingchasesandmakinggoodthe sameincluding testingofjointscompleteasper directionofEngineerinCharge.Concealedwork, includingcuttingchases andmakinggoodthe walls etc 20 mm nominal outer dia Pipes |
49 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. |
50 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick. |
51 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
52 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter |
53 | Marble stone flooring with 18mm thick marble stone as per sample of marble shall be approved by Engineer-in-charge over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with : Makrana white second quality. |
54 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm |
55 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400 micron, finished with 12mm cement plaster 1:3 (1 cement :3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
56 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes.110 mm diameter |
57 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
58 | Single tee with door 110x110x110 mm |
59 | Single tee without door 110x110x110 mm |
60 | Bend 87.5° 110 mm bend |
61 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm |
62 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work |
63 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989. |
64 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe |
65 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
66 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore |
67 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
68 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
69 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). |
70 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : |
71 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
72 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
73 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
74 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks. |
75 | Demolishingcementconcretemanually/by mechanicalmeansincludingdisposalofmaterial within 50 metres lead as per direction of Engineer in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
76 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. In cement mortar |
77 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
78 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
79 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia |
80 | French spirit polishing : Two or more coats on new works including a coat of wood filler. |
81 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
82 | Providing, Fixing PVC pipes of approved quality, thickness, heavy duty 6kg pressure ( Supreme/finolex or approved make ) for sewer work/underground work etc. wherever required as per the direction of Engineer-In-Charge i/c making the joints leak proof with pvc solution : 110mm |
83 | Providing and fixing 5mm looking mirror with beveled edge (of approved quality) complete fixed on wall with Stainless Steel stud screws and washers etc complete as per direction of Engineer-in-charge. |
84 | Providing and fixingSoap Dish Holder Jaquar Continental ACN-CHR-1131N make as per direction of Engineer-in-charge |
85 | Providing and fixingTumbler Holder Jaquar Continental ACN-CHR-1141 make as per direction of Engineer-in-charge |
86 | P/F Table Top Basin white vitreous china wash basin Range Continental Series, CNS-WHT-905 Table Top Basin, Size: 420x420x155mm with C.I. /M.S. bracket, 32mm C.P. brass waste etc. complete wherever requiredas per direction of Engineer-in-charge |
87 | Providing and fixing SINGLE LEVER BASIN MIXER - CHROMEVignette Prime Jaquar (VGP-CHR-81011B ) as per direction of Engineer in charge. |
88 | Providing and fixingAngular Stop Cock with Wall Flange Jaquar ( VGP-CHR-81053) make as per direction of Engineer-in-charge |
89 | Providing and fixing white viterous china European Rimless,Blind installation wall hung Wc with UF soft close slim seat cover,Hinges,Accessories set , size360x500x335mm with single piece slim concealed cistern Tank with Installation kit with Flush Control Plate, making good the walls wherver required . (KUS-WHT-35953BIUFSM) , JCS-WHT-2400, JCP-CHR-852415) complete as per direction of engineer in charge |
90 | Providing and fixingTowel Ring Square Jaquar Continental ACN-CHR-1121N make as per direction of Engineer-in-charge |
91 | Providing and fixing toilet paper holder : C.P. brass(Jaquar make) ACN-CHR-1153S)make as per direction of Engineer-in-charge |
92 | Providing and fixing Single Towel Rail 600mm Long - Chrome (Jaquar make) ACN-CHR-1111SM make as per direction of Engineer-in-charge |
93 | P/F CORNER GLASS SHELF - CHROME etc of approved quality complete (Jaquar make ACN-CHR-1173 ) as per direction of Engineer-in-charge |
94 | Providing and fixing Hand Shower (Health Faucet) with 8mm Dia 1.2 Meter Long Flexible Tube and Wall Hook ( ALD-CHR-573 )make as per direction of Engineer-in-charge |
95 | Providing and fixing Concealed stop cock Regular body aid ( ALD-CHR-083) and Exposed Part Kit Conc Stop Cock( VGP-CHR-81083K ) complete as per direction of engineer in charge |
96 | Providing and fixing Jaquar Concealed body for single lever high flow diverter( ALD-CHR-079N ) with exposed kit of Hi-flow diverter (VGP-CHR-81079NK)as per direction of Engineer-in-charge |
97 | P/F Jaquar make Bathtub Spout with Wall Flange (SPJ-CHR-81429) as per direction of engineer in charge |
98 | Providing and fixing Overhead Shower ø180mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System with shower arm of approved quality, 15 mm nominal bore complete. (Jaquar make) OHS-CHR-1759,SHA-CHR-479L450 complete as per direction of Engineer in charge. |
99 | Providing and fixing 2 Way Bib Cock with Wall Flangeof 15 mm nominal bore VGP-CHR-81041 (Jaquar make)etc complete as per direction of Engineer-in-charge |
100 | Providing and fixingbib cock with Wall Flange Jaquar ( VGP-CHR-81037 ) make as per direction of Engineer-in-charge |
101 | Provding and fixing commercial cupboard (Duro/Centuary) of depth upto 300mm with shelves, sides, top bottom & shutter with 19mm thick teak board(Duro/Centuary) and laminated with 1mm thick sunmica (Merino make) i/c multipurpose lock(Godrej) , fittings, painting of inner sides all complete as per direction of Engineer-in Charge. (Front area measurement will be made for face /front of cupboard taken for payment) |
102 | P/F PVC water storage tank cover 500 to 1000 ltr of approved quality and make capacity with locking arrangement etc complete as per direction of Engineer in charge |
103 | Cleaning of roofs, vertical rain water pipes, spouts, sunshade, removing of peepal trees, grass and unwanted vegetations from parapet and roof, vertical stacks and collecting malba / kooda at ground floor complete. For disposal. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail