Military Engineer Services-MES has published Tender For Special Repair For Security Light / Street Light/High Mast Light And Certain Sanctioned Works Under Ge Saugor. Submission Date for this Tender is 09-05-2024. Street Lighting Tenders in saugor Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Apr-2024 | Corrigendum No. 01 | Date | 09-05-2024 |
| FileName | File Description | File Size |
| 0039acbf-cc0c-49b8-9457-2eb3cdba95ba.html | Tender Notice | 0 KB |
| BOQ_727372.xls | Tender Document | 0 KB |
| GP_SC_TOK10.pdf | Tender Document | 0 KB |
| PS_TOK10.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes)each n exc 0.5 cum ,getting out ,in soft/loose soil, and removing/spread and levelled at site complete all as specified and directed . |
| 2 | M&L PCC 1:2:4 type B-2 using 40 mm graded stone agg as in fdn filing mass concrete complete all as specified and directed. |
| 3 | S&F rolled mild steel work in purlins / rafters/ post with round / rectangular/ square hollow mild steel tube section Fe 410-w (Gde-250 quality-A) complete all as specified and directed. |
| 4 | S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 290 Gde E 165) complete all as specified and directed. |
| 5 | S&F roof mild steel trusses ( Framed), trusses purlins, crane ganttires, rails and fastenings and heavy brackets framing ( Beams, tee, angle, channel or Flat Section) including distance pieces, cleats etc with round / rectangular/ square hollow mild steel tube section Fe 410-w (Gde-250 quality-A)complete all as specified and directed. |
| 6 | S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long dia of shank 16 to 20 mm complete all as specified and directed. |
| 7 | S & FPre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 8 | M&L preparation or new steelsurfaces and apply 2 coats of syntheticenamelled paint over a coat of red oxide primer over 10cm width or girth complete all as specified and directed. |
| 9 | Excavation over areas n.exc1.5m deep and getting out in soft/ loosesoil complete all as specified and directed. |
| 10 | M &L for Brickwork with subclass "B"bricks, straright or corved on plan exc 6m mean radius built in Cement mortar 1:6complete all as specified and directed. |
| 11 | M&L rendering 15 mm thick on surface other than fair face of brickwork with CM 1:6 finished even & smooth complete all as specified and as directed |
| 12 | M&L for applyingthree coats of white wash over wall surfaces including preparation of surfaces of new plaster surfacescomplete all as specified and directed |
| 13 | Moorum/red bajri filling in floors or pavings laid in layers n.exc 15cm thick spread levelled and rammed including watering complete all as specified and directed. |
| 14 | M&L PCC 1:4:8 type D-2 using 40 mm graded stone agg as in foundation filing mass concrete complete all as specified and directed. |
| 15 | S & F Machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigmentetcover and incl 40mm thick uniformly levelled surface ofstone dust cushioningcomplete all as specified and directed. |
| 16 | M&L PCC 1:4:8, Type D2 (using 40 mm graded stone aggregate), 100mm thick, as in sub base/ mass concretecomplete all as specified and directed. |
| 17 | M&L PCC 1:2:4, Type B2 (using 40 mm graded stone aggregate), 100mm thick, as in sub base complete all as specified and directed. |
| 18 | M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in , coping, benching and other similar work with weathering slightly rounded edges and throating etc as req with and incl all necessary form work complete all as specified and directed. |
| 19 | Removing excavated materialexc 50mtr but n.exc 250mtr and depositing where ditected at a level n.exc 1.5mtr above the starting point complete all as specified and directed. |
| 20 | M&L damp proof course to horizontal or vertical surfaces in cement concrete 1:2:4, type B-0, 40 mm thick, with and including WPC including necessary formwork complete all as specified and directed. |
| 21 | M&L 75mm thick PCC type C-2, (1:3:6) using 20mm graded stone aggregate as in plinth protection surface finished even and smooth without using extra cement complete all as specified and directed. |
| 22 | M&L for walling of random rubble uncoursed well bounded bedded and solidly hearted in Cement mortar 1:6complete all as specified and directed. |
| 23 | M&L for rendering 15 mm thick on fair face of brick work or concrete surfaces in CM 1:6 and finished even and smooth with out using extra cement complete all as specified and directed. |
| 24 | S&F aluminium windowssliding type three track powder coated consisting of frame bottom with gutter of sizemin 92.34 X 39 mm,sideand top of size min 92.34X29.70, shutters vertical 39X20 mm,shutter top &bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 4 mm thick tintedglass with rubber gasket,brush and aluminium beading , ,aluminium wire mess 0.45 mm diaetcincluding necessarycutting holes on wall and floor and confirming to IS complete all as specified and directed. (Aluminium section thickness 1.50 mm) |
| 25 | S&F framed work such as grills gratings,sunshed cover fixed with nut bolts incl,cutting drilling holesetc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framedwork or water tanks and similar work conforming to Fe 290gde E 165 complete all as specified and directed. |
| 26 | Supply and fixed 16-18 mm thick Graniteof any shade( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and likein cement mortor 1:4including pointing in whitecement 1:2 using marble dust with admixture of pigment to match shade of the slabs etc complete all as specified and directed. |
| 27 | M& L rounding/ chamferringto edges of stone slabss one edge , such as in steps , cooking plateform and othersimilar situations etc complete all as specified and directed. |
| 28 | Disconnecting and taking down old fitting of fluorescent tube light/HPSV/MH/HPMV of any wattage or sizeflood lights/street light fittings on pole up to 11 mtr complete all as specified and directed. |
| 29 | S&F in replacement of 150 watt LED flood light fittings having long life of high power LED with SMD LED exclusive innovative dia cast aluminium IP-66 built in IP-67 electronic driver with APFC, lower THD, open circuit protection, over voltage protection, surge protection up to 10KV with built in SPD & other safety as per IS-15885 part -2, Sec 13, IEC 60598-1 of operating voltage 140-270V avg life 50,000 hours complete manufacture prove all test certificate as per protection for minimum 2 years from manufacturing companies complete all as specified and directed. |
| 30 | Supply and fixing in replacement of LEDStreet Light fixture with IP-66 protected die-cast aluminium housing and heat resistive toughened glass in the front and peanut lens for batwing light distribution, higher spacing between poles and maintenance free system. LED shall be having LM-79 and LM-80 complied as per L-70 standard. Maximum power consumption shall not exceed 70W and system lumens shall not be less than 9,000. Optics shall be properly designed with Polycarbonate Lenses to avoid dark patches on the road. Street light without lenses will not be acceptable. Driver shall be 3 stage "Constant Current Constant Voltage" with voltage range of 150-270V AC. Output voltage of driver should be complied to Safety Extra Low Voltage norms not exceeding 60 V DC. Note: (i) The item rate shall deem to include provision of weather proof PVC insulated aluminium conductor cable 1.5 Sqmm, 3 core as required. (ii) Contractorshall produce warrintycertificate and LEDs used in the product shall comply with EN-62471 for photo - biological safety and certificate for the same from manufacturer shall be provided.Luminaire manufacturer shall produce certificate of association with LED manufacturer for minimum two years. |
| 31 | Supply and fixing40 mmboreforLED fittingslight grade GI bracket 1.20 mtr long bent to shapeby cutting welding and well finishing including MS clamp of flat iron of size 25x5mm suitable length 2 nos complete for steel tubular poles with nuts bolts and painting with two coats of aluminium paint over a coat of primer on MS clampcomplete all as specified & directed. |
| 32 | M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 Mtr below ground level connected to galvanized iron wire 4mm by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber) 1:2:4 type B-1 using 20mm graded stone aggregate copy shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4 funnel wiht wire gauge of 22 gauge (0.68mm) 8 mesh per liner inch, 50 mm thick cover of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with 8 mm four MS bars @ 80mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision of earth wire protected by 15mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, all excavation and earth work & connectiing the earthing to an earthing test point as specified and testing on complete all as specified and directed. |
| 33 | Supply and fix timer switche for street lights control for 3 KW Single Phase rating consists of the following items :- (a) contactor AC3 25 Amps - 01 No (b) Incoming MCB of 25 Amps - 01 No (c) Outgoing MCB of 25 Amps - 01 No (d) complete single phase circuit wiring |
| 34 | Supply and fix time switches for street lights control for 5 KW three Phaserating consists of the following items :- (a) contactorAC3 16 Amps per phase - 03 No (b) Incoming MCB of 20 Amps - 01 No (c) Outgoing MCB of 20 Amps - 01 No (d) complete single phase circuit wiring |
| 35 | Supply and fix junction box Triple Pole and neutral enclosure compression gland2with connector and clamp for pole mounting with two nos of nut bolt and washers and socket complete of size not less than 12"x10"x4" complete all as specified and directed. |
| 36 | Supply and fix junction box Single Pole and neutral enclosure compression gland2with connector and clamp for pole mounting with two nos of nut bolt and washers and socket complete of size not less than 12"x10"x4" complete all as specified and directed. |
| 37 | Supply, installation, connecting, commissioning and repalcement of LT panel with CPRI approvedmainfactory fabricatedLT distribution panel board, outdoor type, both side openable including loking arrangement with sliding door bolt , cubical type, 3 phase, 4 wire, 415V, factory made free standing, floor mounting, dust and vermin proof, cubical type, fabricated from 3.15 mm thick MS sheet with anticorrosive coating and finally epoxy polyster powder coating of flint grey shade fully compartmentalised design with 4Nos insulated bus bar each made of high conductivity aluminium suitable for 200 Amps, prewired with suitable size of copper cable/insulated copper strip including PCC work and Iron work for fixing arragement at site suitable earth strips conforming to IS, cable glands, lugs etc suitable for and comprising of the following including taking down old LT panel:- (A) INCOMING (i) MCB, TPN, 415V, 50HZ, 63 Amps 10 KA - 01 No. (B) OUTGOING (i) Digital Multifuction meter withselector switch and three current transformers of suitable ratio and capacity -01 Set (ii) LED TypePhase indicator lamps for three phases set of three - 01 set (iii) Busbar chamber having insulated aluminium busbar, each suitable for 200 Amps for three phases and neutral -01 Set (iv) MCB, SPN, 230V, 50HZ, 20 Amps with rupturing capacity 10 KA - 05 Nos (v) Blank space for MCBs SPN - 02 Nos |
| 38 | Supply and Installation of Compact aesthetic ecofriendly & modern integrated solar street ligt 24W in extruded aluminium construction with high efficiency monocrystalline silicon photo volatic panel high efficiency SMD LED 6500K having secondary lens optic for street lighting distribution high performance lithium battery MPPT charge controller and intelligent control module sensor with higher reliability long service life suitable for easy and quick installation complete all as specified and directed. |
| 39 | S&F in repair pipe galvanised iron medium grade ( ISI marked) with all fittings laid in trenches or on pole, crossing of road,fixed on wall for protection of cables complete all as specified and directedof 80 mmdia complete all as specified and directed. |
| 40 | S&F in repairs round flexible PVC insulated copper cable of size 1.5 sqmm 3 core, 1100 volt grading complete all as specified and directed. |
| 41 | S&F for PVC conduit 20mm dia including fixing on wall/pole with necessary fixing arrangement complete all as specified and directed. |
| 42 | Taking down LTUG cable PVC insulated , beddedarmoured heavy duty electric cable 1100 volts grade with aluminium conductor of any size laid in trenches or fixed on wall/floor/poles from trenches for complete all as specified and directed. |
| 43 | Supply, laying, connecting and testing in replacment of cable XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volt grade cross sectional area 35 Sqmm 3.5 core complete all as specified and directed. |
| 44 | All as above item no 43.00 but Size 16 sqmm 4 core complete all as specified and directed. |
| 45 | All as above item no 43.00 but Size 10 sqmm 4 core complete all as specified and directed. |
| 46 | All as above item no 43.00 but Size 10 sqmm 2 core complete all as specified and directed. |
| 47 | Excavation in trenches in hard/ dence soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth for laying of cables/poles or foundation etc and getting outcomplete all as specified and directed. |
| 48 | Returning, filling, including spreeding leveling watering and well ramming in layers not exceeding 25 cmapart complete all as specified and directed. |
| 49 | Removing of surplus excavated soil to distance not exceeding 50 Mtr from starting point and depositing where directed at a level not exceeding 1.5 Mtrs above the starting point complete all as specified and directed. |
| 50 | M&L for sand cushioning with a layer of sand 80mm thickbefore laying of cable and 150mm thick after laying of cable to trenches complete all as specified and directed. |
| 51 | Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250mm x 150mm x 40mm complete all as specified and directed. |
| 52 | Supply and laying and fixing in position galvanized iron pipe 40mm bore light grade fixed to pole with mild steel clamps of required size or laid through wall/under floor/under road/in trenches complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
