Military Engineer Services-MES has published Tender For Additional/Alternator/Improvement Of Toilets At Ce (Af) Office Complex And Other Sanction Works At Af Stn Bamrauli. Submission Date for this Tender is 16-05-2024. Toilet Bathroom Tenders in bamrauli Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 24-Apr-2024 | Corrigendum No. 1 | Date | 02-05-2024 |
| 2 | 02-May-2024 | CorrigendumNo. 3 | Date | 09-05-2024 |
| 3 | 02-May-2024 | Corrigendum No. 2 | Other | 09-05-2024 |
| 4 | 09-May-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-05-2024 |
| FileName | File Description | File Size |
| 603448c6-80f2-4b9a-a2f3-74fd4189bd66.html | Tender Notice | 0 KB |
| BOQ_727332.xls | Tender Document | 0 KB |
| Tender.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. |
| 3 | M&L for Solid WPCFrame for door,size of size 125mm x 65mm made out single rebated made frome WPC material supplying & fixing in opening as per specification & drawingcomplete all as specified and directed. |
| 4 | M&L for Solid PVCFrame for door,kitchen cabinet,cupboardof size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawingcomplete all as specified and directed. |
| 5 | S&F Factory made solid 30 mm thick 100 % solid WPC laminated flush shutter suppling & fixing in the frame at site asperspecification &drawing.complete all as specified and directed. |
| 6 | S&F Factory made solid panel PVC door shutter 30 mm thick (style)both side prelam pvc sheet of decortive choice consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat mouldedPVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site asperspecification &drawing.complete all as specified and directed. |
| 7 | S&F Aluminium ( powder coated) frame for sliding window, side hung window and ventilators with necessary joining cleats fasterner etc to fix in existing opening complete. Notes : (i) Thickness of powder (epoxy polyster) coating shall not be less than 50 Micron (iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. (iv)gaps between frame and masonary/ cill/ lintel to be filled with silicon gel for water tightness. (v) Quoted rate shall deem to included making good for jambs soffits and cills etc. |
| 8 | S&F aluminium window (Powder coated ) in three leaf sliding with anodized aluminium frame sliding including wheel powder coated of section 62.5x37x2.5 mm thick shutter with bottom & middle rail of section 112.5x37x2.5mm and style & top rail of section 83x37x2.5mm thick with centrally locking arrangement with lock rail of rebate including joints cleat fixing of builders hardware fittings necessary and gazing with 5mm thick tinted glass including wire mesh shutter necessary fittings fixuters & aluminium snap beads complete. Notes : (i)Quoted rate shall be deemed to include the cost of5 mm thick tinted selected quality Glass panelsand ss wire mess to windows . (ii) Thickness of powder (epoxy polyster) coating shall not be less than 50 Micron (iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. (iv)Aluminium section which is not specified above,shall be as per drg No. CE/ALD/TD-194 sheet No. 1/2 & 2/2 (v) Quoted rate shall deem to included cost ofalumiumum powder coated builder hard ware. |
| 9 | S&F powder coatedanodised aluminium (sliding/ hanging/ fixedtype) ventilator with frame size 60x40x2.00mm thick and shutter with section bearing bottom 25x18x1.50, top 39.4x17.7 X1.50 mm ( suitable for moving over twotrack or fixed over top of frame work , top and side section of size 61.6 x 31.75x1.5mm and bearing bottom track of size 61.6x 31.75x1.5mm or fixing with hinges including necessary aluminium jointing cleats, glazing cleats, rubber packing anodised snape beading, screws etc with 5mm thicktinted glass in panels and wire messincl all fitting and fixture complete all as spesified and directed. Notes : (i)Quoted rate shall be deemed to include the cost of5 mm thick tinted selected quality Glass panelsand ss wire mess to windows . (ii) Thickness of powder (epoxy polyster) coating shall not be less than 50 Micron (iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. |
| 10 | M&L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanksand similar work conforming to Fe 410-0 or Fe 310-0. complete all as spesified and directed . |
| 11 | M&L for preparing new or previously untreated steel surfaces of any description not otherwise describedover 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 12 | S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, typeB-21 complete all as spesified and directed . |
| 13 | S&F 250 mm long Aluminium alloy with dia 16mm, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.complete all as spesified and directed . |
| 14 | S&F 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised.complete all as spesified and directed . |
| 15 | S&F 200 mm longAluminium anodised barrel tower bolts of extruded section.complete all as spesified and directed . |
| 16 | S&F for 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as spesified and directed . |
| 17 | S&F in repairBrass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed. |
| 18 | S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed. |
| 19 | S&F in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm "white" with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc all as specified in Particular specifications. Note : Vitreous china wash down water closet (Pedestal Pattern) cat Part No. CURATOR S1013132 S trap 250mm of "Cera" or equivalent model of make specified in Appendix "B" to particular specifications. |
| 20 | S&F in repair vitreous china wall hung wash hand basin with pedestal snow white miniumum size630mmx450mm including chromium plated brass coupling, bottle trap, chromium plated brass centre hole basin mixer, 450 mm PVC braided connection (two numbers), angular stop cock ( valve) (two numbers) complete all as specified in particular specifications. Note : Vitreous china wall hung wash hand basin cat Part No. CONCORD S2040112, Pedestal cat part No S2090107 & chromium plated brass centre hole basin mixer cat part No F2002461 of "Cera" or equivalent model of make specified in Appendix "B" to particular specifications. |
| 21 | S&F in repairs Vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) and including fixing of the following components viz. pedestal pan with "P" or "S" trap, seat and cover for pedestal pan, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushing rim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper fixed as in repairs complete all as specified and as directed. Note:- Flushing cistern and flush pipe as required shall be measured and paid for under supply only separately. |
| 22 | S&F in repair Vitreous China Urinal, full stall type, white (including flushing cistern, flush pipe and waste pipe complete all as specified in particular specifications. |
| 23 | S&F in repair HEALTH FAUCET (ABS body) mild steel chrominium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making fixed in position complete all as specified and directed. as in repairs complete all as specified and as directed. |
| 24 | S&F in repair 600mmx450mm and 6mm thick bevelled edge looking mirror fancy type mounted on WALL with chromium plated brass screws WITH SPACER and cup washer fixed on wall complete all as specified and as directed. |
| 25 | S&F in repair 900mmx450mm and 10mm thick frosted urinalglass partition bevelled edge fancy type mounted on wall and fixed with fasterners minimum3 nos on each glass complete all as specified and as directed. |
| 26 | S&F in repairs600mm long between flanges brass chromium plated towel rack with brackets fixed to wall with chromium plated brass screwscomplete all as specified in particular specifications. Note :- (i) Towel rackcat part No F5002101 of Cera or equivalent model of make as specified in Appendix "B" to Particular specifications as in repairs complete all as specified and as directed. |
| 27 | S&Fin repair grating doom 100mm dia of CP (Minimum weight 60 Gms)complete all as specified anddirected |
| 28 | S&F in repair CP fancy type towel ring complete all as specified and directed. |
| 29 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 120mm (minimum) wide with chromium plated brass bracket guard and railing 600mm long complete. |
| 30 | S&F in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including dual flushball valve float & handle, waste pipe & brackets complete set complete all as specified and directed. |
| 31 | S&F in repairVitreous China wash basin, flat back, size 450x300mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets. |
| 32 | S&F in repair Waste coupling of PTMT (half or full threaded) . (Minimum weight2mm45gms/40mm 60 gms waste pipe of 40mm dia suitable for WHB, kitchen sink complete all as specifed and directed |
| 33 | S&F in repair angle cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. |
| 34 | S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed. |
| 35 | S&F in repair Pillar taps fancy typecast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot" or `Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 36 | S&F in repairPVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed. |
| 37 | Dismantlingtanks water tank exc 250 but n exc 500 ltr.complete all as specified and directed. |
| 38 | S&F rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with fitting etc. of 20 mm dia directed complete all as specified and as directed. |
| 39 | S&F ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified and as directed. |
| 40 | S& F Stop valves/Gate valves 25 mm dia cast copper alloy,screwed down, high pressure with crutch or butterfly handel, screwed both ends for iron pipe or for unions and fixed.complete all as specified and directed. |
| 41 | Taking up or down old steel tubing 15 mm dia complete all as specified and directed. |
| 42 | Taking up or down old steel tubing 20 mm dia complete all as specified and directed. |
| 43 | S&F 15 mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid infloors including taking up or down old steel tube complete all as specified and directed. |
| 44 | S&F 20 mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid infloors including taking up or down old steel tube complete all as specified and directed. |
| 45 | Dismantling of cast iron or renforced drain pipe 100mm/75mm dia of any description complete all as specified and directed. |
| 46 | S&F Cast iron soil, waste and vent pipe100 mm dia in any length with or without ear, with cement joint, laid in trenches or in wall complete all as specified. |
| 47 | S&F 100 mm cast iron sanitary connection socket to fitwc out let complete all as specified and directed. |
| 48 | S&F 100 mm cast iron sanitary connection S branch with branch 370 to 450 mm long excluding jointcomplete all as specified and directed. |
| 49 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories). |
| 50 | S&F of 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed |
| 51 | S&F of 75 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed |
| 52 | S&FPVC SWR (110) bends any radius comlete all as specified and directed. |
| 53 | S&F 75 mm PVC (SWR) junction single, (singl T)(equal or unequal), ordinary or inverted ( spigot or socket type) or with paralle oval access doorsbranches .complete all as specified and directed. |
| 54 | S&F 110 mm PVC (SWR)vent cowl. Complete all as specified and directed. |
| 55 | M&L 75mm PVC (SWR)floor trap, plain with grating including jointing with solvent cementcomplete all as specified and directed. |
| 56 | M&L PVC(SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified directed. |
| 57 | S&F stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 100mm complet all as specified and directed. |
| 58 | S&F stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 75 mm complet all as specified and directed. |
| 59 | Dismentling of floor, hearth or wall tilingincluding cement mortar bedding (but not backing)complete all as specified and directed. |
| 60 | M&L forNon Skid ceramic coloured tiles 7 to 8 mm thickjoint free (square/ rectagular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm ,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6) complete all as specified and directed. |
| 61 | M&L for Glazed ceramic tiles in vertical surface 450x 300x7 mmthick joint lesstiles set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe shade tile over and inclduing 10mm thick rendering in CM (1:4) complete etc. (1st quality/Premium Quality).complete all as specified and directed. |
| 62 | Demolition of brickwork or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed. |
| 63 | M&L for Brickwork with subclass "B" bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 of using class designation 100 of bricks in lieu of 75all as specified and as directed. |
| 64 | Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed |
| 65 | M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed |
| 66 | M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, with mixing WPC @ 3% by wt of cement surfaces finished even and fair without using extra cement complete all as specified and directed |
| 67 | M&L for rendering 5mm thick in CM 1:3 finished even and smooth with out using extra cement in ceilingcomplete all as specified and directed |
| 68 | M&L for preparing new plaster surfaces of ceiling and applying two coats of oil bond distemper over a 1.5 mm wall care putty complete all as specified and directed. |
| 69 | M&L for preparation of new plaster surfaces of walls and applying two coats of oil bound distemper over 1.5 mm wall care puttyr complete all as specified and directed by Engg-in-Charge. |
| 70 | M&L for applying twocoats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over new plaster surfaces of walls complete allas specified and directed. |
| 71 | M&L for complete removal of existing treatmenton ceiling surface and applying two coats of oil bond distemper over a 1.5 mm wall care putty complete all as specified and directed. |
| 72 | M&L for complete removing existing treatment on wall surface andapplying two coats of oil bound distemper over 1.5 mm wall care putty complete all as specified and directed by Engg-in-Charge. |
| 73 | M&L for complete removal of existing treatment and applyingtwocoats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over old surfaces of walls complete allas specified and directed. |
| 74 | M&L for preparation of old painted steel surfaces of any description,over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint), complete all as specified and directed. |
| 75 | M&L for preparation of old woodenSurfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 76 | M&L for sunkan portion incl demolation of existing PCC,WC,P/S Trap and removing the material out side MD land.& (a)preparation of RCC surface of sunken slab (floor) by brushing and cleaning throughly with water (b) application of two coats of poly urethane based chemical treatment (as per manufracture instruction DR FIXIT/FOSROC/CICO/STP) (c) 15 mm thick (1:4) plaster over chemical coating incl finished even & smooth without using extra cement all as directed. NOTE:- 1. continuty with cementitious water treatmentbeyond sunken portion in toilet shall be maintained. |
| 77 | M&L for cement concrete type E2 1:5:10 (40mm graded stone aggregate) as lean concrete in filling / Mass concrete complete all as specified and directed |
| 78 | Taking down carefully aluminium batten point, wiring for light/fan/socket/bell or power point including. All fittings i.e. switch, sockts, ceiling rose, regulators, batten holders etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings. Note:- (i) Contractors qotted rate of this item deemed inclusive of unscrerwing of the serviceable fittings and fixture as directed and deposit in MES store yard. (ii) Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii) Decision of GE shall be final and binding in respect of serviceability of fittings/fixture. |
| 79 | M&L for point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through new PVC concealed conduit mediem grade, ISI marked and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for husing switches, socket outlet and fan regulators etc, complete all as specified and as directed for the followings:- |
| 80 | (a) One light/fan/bell point controlled by one switch single pole one way |
| 81 | (b) All as per item No 79 here-in-before but one 3 pin 6 amp switch socket outlet independent. |
| 82 | (c) All as per item No 79 here-in-before but one 3 pin 6 amp switch socket outlet on the same board with other switch complete. |
| 83 | All as per item No 79 here-in-before but using 02 Nos 4.0 sqmm size for main cable and 01 No 2.5 sqmm size as earth conductor for one 16 amp switch socket outlet on independent board. |
| 84 | S&F switch modular flush 10A single pole one way ISI marked. |
| 85 | S&F modular sockets 10 Amp 2 in 1 2/3 pin combined all as specified and directed. |
| 86 | S&F switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked. |
| 87 | S&F modular sockets 16 Amp 2 in 1 3/5 pin cobined all as specified and directed. |
| 88 | S&F ceiling rose surface bakelite 60x25mm three terminal. |
| 89 | S&F LED lights fitting 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 90 | S&F LED batten extruded surface mounting fitting 2 feet long aluminium housing 10 watt input voltage 220 volt inbuilt LED and driver complete all as specified and as directed. |
| 91 | S&F Ventilating Fan 250mm sweep, 1250RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of making holes and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all as specified and as directed. |
| 92 | S&F MCB DB SPN 4 way, double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting complete all as specified and directed. |
| 93 | S&F MCB, single pole and neutral, 230 volts, 32 Amp rating, "C" series fixed in DBs catered here-in-before. |
| 94 | S&F MCB SP 6-32 Amps 240 volts 10 KA 50 HZ "C" curve complete all as specified and directed by Engineer-in-Charge. |
| 95 | Demolition of un reinforced Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 96 | M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work complete. |
| 97 | M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in leveling course to floor complete all as specified and directed. |
| 98 | M&L for rendering 10mm thick in cement mortar (1:4) over concrete surfaces of roof, complete all as specified and directed |
| 99 | M&L forone coat ofPrimeseal primer dilute with water in the ratio 2:1 spreading at the rate of 8.0 – 10.0 / Sq.mt / Litre in the SSD condition. Apply 1st coat of Roofseal Ultra without dilution spreading at the rate of 0.70/litre/Sq.mt/Coat until all surface is covered. Lay a 45 GSM Fibre glass mesh as a reinforcing material which is incorporated in the coating when the first coat is still in wet condition. Allow the first coat to dry for approximately 4-6 hours before applying the 2nd coat at 90° to the first coat. Ensure there are no pinholes or air bubbles on the membrane surface. Apply second coat of Roofseal Ultra without dilution spreading at the rate of 0.70 litre / Sq.mt /Coat to achieve total dry film thickness of 850 to 1000 microns at forced coverage at the rate of 1.40 litre / Sq.mt in 2 coats. Meet and exceeds the ASTM D 6083 - 97a standard specification. Attains a Tensile strength of = 4.00 N/mm2 with 45 GSM glass fibre mesh confirming to ASTM D 412; Elongation at break =300% and crack bridging ability up to 3 mm, Solar Reflectance Index as per ASTM E 1980 – 105, Water permeability @5 bar – Nil as per EN12390 - 8:2019. Air cures the coating for 7 days. System comes with 12 years waterproofing warranty For vertical surfaces and parapet walls should be enveloped & coated / painted withRaincoat Select Waterproof coating system. Note – Coating should be terminated below the drip mould on the vertical surface. |
| 100 | Surface dressing n exc 15 cm deep in soft loose soil complete all as specified and directed. |
| 101 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 102 | Removing excavated material exc. 250 m but n. exc. 500 m and depositing where directed. |
| 103 | M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base / mass concrete complete all as specified and directed. |
| 104 | M&L for 80 mm thick rubber moulded interlocking paver block rubber moulded and coloured pattern any shape and size confirming to IS 15658-2006 of M-35 with coloured cement and pigment complete all specified and directed. |
| 105 | Sand filling under floors or foundations includingwatering and consiladition complete all as specified and directed. |
| 106 | Returning filling in, including of spreading, levelling watering and well rammed in layers n exc 25 cm complete all as specified and directed. |
| 107 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, benching, bed block, cills like including weathering and slightly rounded etc including form work. complete all specified and directed. |
| 108 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below and above ground level) and removing the unserviceable materials to a distance not exceeding 100m all as specified and as directed. |
| 109 | M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub base / mass concrete complete all as specified and directed. |
| 110 | M&L for PCC 1:2:4 type BO, 25mm thick as in levelling course |
| 111 | M&L for providing and laying 20 to 25mm thick Mastic flooring as per IS 1195 specification using blown bitumen and coarse dust including a coat of primer using bituminous emulsion and above with mastic flooring with given level and slope, including materials, labor, staging etc. aggregate less than 6mm as per manufacurer specification. |
| 112 | M&L for Preparation of new plastered surface of wall and applying three coats of whitewash on surface of wall incl cornice etc complete all as specified and directed |
| 113 | M&L for preparation of new plastered surface of wall and applying two coats of two coat of ACE exterior emulsion paintcomplete all as spd & directed. |
| 114 | M&L for preparation of old decorated surface of wall and applying two coats of ACE exterior emulsion paintroof or sheet any type and applying(Asian Paint) complete all as specified and directed |
| 115 | S&F plain weave woven LPG gas godown brass wire mesh having size 30 mesh and mesh size of 10-50 per inch complete all as specifed and directed. |
| 116 | Demolition of Wallandceilingboards(fibre, pulp, insulation, etc.) or insulationboards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 117 | M&L for Providing & fixing false ceiling at all height with GRG (Glass Fibre reinforced Gypsum) false ceiling tile of size 595x595mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 99%,NRCO.50 to 0.75 as per IS 8225:1987, non combustible as per BS 476(Part4)-1970 and light reflectance of 85% (minimium) to be laid in true horizontal level suspended on interlocking metal T-grid of hot dripped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per Sqm including both sides) comprising of main T-runner of size 15x32mm of length 1200mm and sectinally intermediate cross T of size 15x32mm of length 600mm to form grid module of size 600mmx600mm, suspended from ceiling using galvanised mild steel items (galvanised @80 grams per Sqm) i.e. 50mm long,8mm outer diameter M-6 dash fastners 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partitionwith the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per direction of the Engineer in Charge |
| 118 | M&L for Complete removal of existing finishes on wall and applying two coats of oil bound distemper over a coat of primer including chalk whitning and application of paint through mechanical means complete all as specified and directed. |
| 119 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
