|
| 1 | Class-150 (Non Modular) brick work in 1:6 cement and Coarse sandmortar in super Structure Half brickincluding supply of all materials, labour and T&P etc. required for proper completion of the work. (Chapter_6_Item_1+6) |
| 2 | 12mm Cement plaster with cement mortar in proportion of 1:4 cement & coarse sand ofsingle coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm. In girth and finished even and smooth. (Chapter_13_Item_1) |
| 3 | Distempering Doble coat over old surface with oil bound distemper of approved brand and manufacture and of required shade on undercoated wall surface to give an even shade over & including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian, paints after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of approved synthetic material and sand papered smooth including cost of all materials. (Ch- 15_Item_27) |
| 4 | Cementconcreteflooring1:2:4(1cement:2coarsesand:4gradedstone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 25 mm thick with 20 mm nominal size stone aggregate (Chapter_14_Item_5) |
| 5 | Oiling of greeshing of Rolling shutter |
| 6 | Providing and fixing 27.52 cm long wire spring grade 2 for rolling shutters. (Chapter_10_Item_6) |
| 7 | Dismantling of AC Sheet roofing including ridges hips, velleys, gutters etc. stacking the serviceable materials and disposal of unserviceable materials within 100 meters lead A.C. Sheet roofing (Labour Rate) (DSR_2018_15.28.2) |
| 8 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² (Chapter_11_Item_3c) |
| 9 | P/F ridger of 60 cm width G.S sheet 0.63mm thick with zinc coating (DSR_2018_12.51.1) |
| 10 | Supplying and fixing rolling shutters of approved make made of 8.25mm (3\") x18 gauge cold rolled M.S. path interlocked through out their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brick etc. side guides and arrangement for inside and out side locking with push and pull operation complete with excluding the cost of top cover and spring. (Chapter_10_Item_5) |
| 11 | Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches. (Chapter_4_Item_1) |
| 12 | Providing and laying cement concrete in 1:6:12 (1 cement : 6 Coarse sand : 12 graded stone aggregate 40mm nominal size) including supply of all materials, labour and T&P etc. required for completion of work and curing complete, including cost of form work. In Foundation and floors.(Chapter_5_Item_1) |
| 13 | RCC work Providing and laying in position specified grade of reinforced cement concrete in Raft foundation, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level in :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)(Chapter_5_Item_10) |
| 14 | Class-150 (Non Modular) brick work in 1:6 cement and Coarse sandmortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. (Chapter_6_Item_2) |
| 15 | Class-150 (Non Modular) brick work in 1:4 cement and Coarse sandmortar insuper structure above plinth level upto floor five levelincluding necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than12cm.(Chapter_6_Item_2+5) |
| 16 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. including cost of centering, shuttering, finishing and excluding reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) ii) Above plinth level upto fifth floor lable (Chapter_6_Item_12B) |
| 17 | Mild steel or iron in plain work such as reinforced concreteor reinforced brick work (when not including in over all rates) brought to required shape as necessary including bending for proper completion of the wrok and including supply of all steel its wastage bend, hooks and authorized over lapping shall be measured upto floor to level. 15mm to 32mm for (TMT Bars) NOTE:- Anincrease of Rs.7.00 per floor will be all owed after floor two level labour rate does not include cost of binding wire and other materials. SI-504(II) |
| 18 | Finishing walls with exterior emulsionpaint (Apex) ofapproved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat ofprimer applid @ 0.75Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work.for two coat. (Chapter- 15 Item No- 31) |
