Military Engineer Services-MES has published Tender For Provision Of Toilet Block At Afi Complex Nagpur Under Ge Kamptee. Submission Date for this Tender is 07-05-2024. Toilet Bathroom Tenders in kamptee Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 30-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-05-2024 |
| FileName | File Description | File Size |
| baeb8fd2-69ed-4e99-aecc-f5c13140b2c6.html | Tender Notice | 0 KB |
| BOQ_727338.xls | Tender Document | 0 KB |
| Tender.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Surface excavation in soft/loose soil not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Excavation in trenches not exc 1.5m wide and not exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed. |
| 3 | Material and labour for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation complete all as specified and directed. |
| 4 | Material and labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and directed. |
| 5 | Material and labour for flat and curved formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified and directed. |
| 6 | Material and labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished and for fair surfaces of finished square, circular, rectangular on plan or polygonal concrete complete all as specified and directed. |
| 7 | Material and labour for formwork to soffits of suspended slabs such as roof slab, floor slab, landings and similar works not exc 200mm thick (Horizontal or sloping) and similar work complete all as specified and directed. |
| 8 | Material and labour for mild steel bars 10mm dia and over, cut to length, bent to shape as required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 9 | Material and labour for mild steel bars 5mm dia and over, upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 10 | Material and labour for RCC M-25 (Design mix) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs under-reamed piles and mass concrete complete all as specified and directed. |
| 11 | Material and labour for RCC M-25 (Design mix) as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 12 | Material and labour for RCC M-25 (Design mix) as in beams, cantilevers, bressumers, lintels over 1.5m span complete all as specified and directed. |
| 13 | Material and labour for RCC M-25 (Design mix) as in chajja etc complete all as specified and directed. |
| 14 | Material and labour for RCC M-25 (Design mix), using 20mm graded stone aggregate for roofs, slabs supported on walls, beams and columns in floors, landings, balconies, canopies, deck slabs and in shelves and the like work complete all as specified and directed. |
| 15 | Material and labour for PCC (1:2:4) type B-1 using 40mm graded stone aggregate as in benching /padding / moulding on top of chajja junctions etc complete all as specified and directed. |
| 16 | Material and labour for old size brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 17 | Material and labour for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:4) complete all as specified and directed. |
| 18 | Material and labour for rendering 10mm thick internal using cement plaster in CM 1:6 on fair faces of brick/ concrete work surfaces to be finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 19 | Material and labour for preparing newly plastered surfaces and applying two coats of oil bound distemper over a coat of 1mm thick putty over a coat of chalk whiting primer on wall complete all as specified and directed. |
| 20 | Material and labour for rendering 15mm thick external using cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces to be finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 21 | Material and labour for finishing walls with acrylic smooth exterior paint of required shade: New York (two or more coat applied @ 1.67ltr/ 10Sqm over and including priming coat of exterior primer applied @ 2.20Kg/10 sqm) complete all as specified and directed. |
| 22 | Material and labour for 5mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:3) finished even and smooth (without using extra lime or cement) on ceiling complete all as specified and directed. |
| 23 | Material and labour for preparing surfaces of any description and applying three coats of white wash on ceiling etc complete all as specified and directed. |
| 24 | Supply and fix powder coated aluminium frame for window, ventilator with one or more rebates including joining cleats for fixing etc complete all as specified and directed. |
| 25 | Supply and fix powder coated aluminium ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc complete all as specified and directed. |
| 26 | Supply and fix 4mm thick figured glass and glazing with rubber beading and aluminium glazing bar in each panel but exc 0.5 sqm each complete all as specified and directed. |
| 27 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as per specification & drawing complete all as specified and directed. |
| 28 | Supply and fixing 30mm thick factory made polyvinyl chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30mm and wall thickness 2mm (+ 0.2mm), with inbuilt decorative moulding edging on one side. The style and rails mitred and jointed at the corners by means of MS galvanised /plastic brackets of size 75 x 220mm having wall thickness 1.0mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised MS tube of size 25x20mm and 1mm (+ 0.1mm) wall thickness. The lock rail made up of "H" section, a UPVC hollow section of size 100x30mm and 2mm (+ 0.2mm) wall thickness fixed to the shutter styles by means of plastic/galvanised MS "U" cleats. The shutter frame filled with a UPVC multi chambered single panel of size not less than 620mm, having overall thickness of 20mm and 1mm (+0.1mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised MS rod and fastened with nuts and washers as specified by the manufacturer complete all as specified and directed. |
| 29 | Supply and fix 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified and directed. |
| 30 | Supply and fix 150mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 31 | Supply and fix 250mm long aluminium alloy anodized sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 32 | Supply and fix 150mm long aluminium handles cast type, anodized complete all as specified and directed. |
| 33 | Material and labour for anti termite treatment to the under plinth protection, top surface of filled earth, bottom and sides of excavation at rate of 5 ltrs of emulsion per square meter of surface area complete all as specified and directed. |
| 34 | Material and labour for ATT to treating the backfill in contact with foundation at the rate of 7.5 ltrs of emulsion per square meter of vertical surafce complete all as specified and directed. |
| 35 | Material and labour for hardcore of guage not exc 63mm deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface of 100mm thick broken/ stone/ boulders complete all as specified and directed. |
| 36 | Material and labour for 100mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed. |
| 37 | Material and labour for 25mm thick cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) complete all as specified and directed. |
| 38 | Material and labour for coloured non skid ceramic tiles 7 to 8mm thick area of each tile exc 0.18 sqm but not exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and joint free complete all as specified and directed. |
| 39 | Material and labour for coloured glazed ceramic tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement mortar 1:3 complete all as specified and directed. |
| 40 | Supply and fix steel water tubing 15mm bore galvanised medium grade with and including provision of all fittings of ISI marked and concealed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 41 | Supply and fix steel water tubing 20mm bore galvanised medium grade with and including provision of all fittings of ISI marked and concealed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 42 | Supply and fix rotational moulded polyethylene water storage tanks (cylindrical verrtical with closed top) of 1000 ltrs capacity hoisted and fixed in position and including dismantling water tank and removing from site complete all as specified and directed. |
| 43 | Supply and fix 20mm bore ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 44 | Supply and fix 20mm dia gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 45 | Supply and fix 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floor/wall complete all as specified and directed. |
| 46 | Supply and fix 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floor/wall complete all as specified and directed. |
| 47 | Supply and fix 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 48 | Supply and fix 110mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 49 | Supply and fix 75mm bore PVC (SWR) junction double (Double T), equal or unequal complete all as specified and directed. |
| 50 | Supply and fix 110mm bore PVC (SWR) junction double (Double T), equal or unequal complete all as specified and directed. |
| 51 | Supply and fix 110mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 52 | Supply and fix 75mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 53 | Supply and fix 100mm cast iron nahni, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. |
| 54 | Supply and fix PVC 100mm gully, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. |
| 55 | Supply and fixin repairs vitreous china wash basin, size 555 x 410 x 205mm wall hung basin with full pedestal and fixing accessories complete all as specified and directed. Make:- Essco by Jaquar Cat No ECS-WHT-801, ECS-WHT-301 or techno commercially equivalent as approved. |
| 56 | Supply and fix in repairs single lever basin mixer without pop up waste with 450mm long braided hoses complete all as specified and directed. Make:- Essco by Jaquar cat No APR-101011NB or technocommercially equivalent as approved. |
| 57 | Supply and fix angular stop cock with wall flange complete all as specified and directed. Make:- Jaquar cat No ORP-10053PM or technocommercially equivalent as approved. |
| 58 | Supply and fix 15mm bore chromium plated bib taps with wall flange, cast copper alloy, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- Jaquar cat No ORP-10037PM or technocommercially equivalent as approved. |
| 59 | Supply and fix in repairs 2 way bib cock with wall flange complete all as specified and directed. Make:- Essco by Jaquar cat No APR 101041 or technocommercially equivalent as approved. |
| 60 | Supply and fix in repairs bowl for coupled WC with PP normal close slim seat cover, hinges, fixing accessories and accessories set, size 395x680x770mm, P/S trap 180mm/220mm (Essco by Jaquar cat No AIS-WHT-101751NSN / AIS-WHT-101751NSN) and cistern with cistern fittings (Essco by Jaquar Cat No AIS-WHT-101201) complete all as specified and directed. |
| 61 | Supply and fix hand shower (health faucet) (ABS body) with 8mm dia, 1.2 meter long flexible tube and wall hook complete all as specified and directed. Make:- Essco by Jaquar Cat No ALE-ESS-593 or technocommercially equivalent as approved. |
| 62 | Supply and fix towel rack 600mm long with lower hangers, stainless steel fixed to wall with chromium plated brass screws complete all as specified and directed. Make:- Essco by Jaquar cat No AEC-1181 or techno-commercially equivalent as approved. |
| 63 | Supply and fix towel ring square fixed to wall with chromium plated brass screws complete all as specified and directed. Make:- Essco by Jaquar cat No AEC-1121 or techno-commercially equivalent as approved. |
| 64 | Supply and fix glass shelf 600mm long fixed to wall with chromium plated brass screws complete all as specified and directed. Make:- Essco by Jaquar cat No CAN-CHR-1171N or techno-commercially equivalent as approved. |
| 65 | Supply and fix soap dish (polycarbide) fixed to wall with chromium plated brass screws complete all as specified and directed. Make:- Essco by Jaquar cat No AEC-1133 or techno-commercially equivalent as approved. |
| 66 | Supply and fix TOILET PAPER HOLDER fixed to wall with chromium plated brass screws complete all as specified and directed. Make:- Essco by Jaquar cat No AEC-11151 or techno-commercially equivalent as approved. |
| 67 | Material and labour for vitreous china urinal, half stall type, white (excluding flushing cistern) complete providing and fixing plugs bedding urinal against wall, pointing around urinal back side, suitable waste pipe for urinal, CP urinal spreader, connection 15mm CP push cock and grating complete all as specified and directed. |
| 68 | Supply and fix 15mm size PVC connections with PTMT nuts of length 450mm complete all as specified and directed. |
| 69 | Supply and fix in repairs 32mm waste fittings, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 70 | Supply and fix in repair brass chromium plated shower rose 125mm size complete all as specified and directed. |
| 71 | Supply and fix in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial mplywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 72 | Material and labour for PCC 1:4:8 type D-2 as in concrete bed to drain pipes of 200mm bore including packing under and haunching against the sides of pipe after they are laid complete all as specified and directed. |
| 73 | Material and labour for reinforcement concrete pipes, class NP-2 laid and jointed complete with collars for 200mm bore pipe complete all as specified and directed. |
| 74 | Material and labour for precast RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in cover slabs etc set in cement mortar (1:4) including use and waste of form work & placing on drains complete all as specified and directed. |
| 75 | Material and labour for PCC (1:2:4) type B-0 (using 20mm graded stone aggregate) as in coping etc including necessary formwork complete all as specified and directed. |
| 76 | Material and labour for PCC (1:2:4) type B1 (using 40mm graded stone aggregate) as in benching complete all as specified and directed. |
| 77 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends complete all as specified and directed. |
| 78 | All as per item No 77.00 herein before but add or deduct for each 25mm girth or part therof over or under 30 cm complete all as specified and directed. |
| 79 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching and forming branch channel 91/1 round or 3/4 section in cementconcrete 1:2:4 type B-1 smooth finished and reforming benching as original formation complete all as specified and directed. |
| 80 | Material and labour for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3mm thick and weight not less than3.50kg/ sqm over roof and vertical surfaces including preparation of surfaces and applying oil/water based bituminous primer coat @0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100mm overlap on both sides all as per manufacturer"s instruction including 15mm thick plaster in CM 1:3 and aluminium paint over membrane complete all as specified and directed. |
| 81 | Supply only liquid water proofing admixture of complete all as specified and directed. |
| 82 | Material and labour for 75mm thick PCC 1:3:6 type C-2 as in plinth protection fixed even and smooth without using extra cement complete all as specified and directed. |
| 83 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed. |
| 84 | Removing excavated material exc 250m but not exc 500m and depositing where directed complete all as specified and directed. |
| 85 | Supply and fix 18 personal locker (grey) size of width 90.5cm, depth 40cm, height 185cm and each locker size 31 x 35 x 38cm, doors made of 0.8mm thick powder coated CRCA sheet, body black & shelves made of 0.6mm thick powder coated CRCA sheet, locking facility available with a duplicate key, total 15 numbers of individual lockers, completely knock down design simplifies assembly model No Nilkamal Magna LMAG15PLO 18 Personal locker (Grey) complete all as specified and directed. |
| 86 | Excavation in trenches for laying of cable trench, pole and stay foundation in any type of soft/loose soil not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out complete all as specified and directed. |
| 87 | Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 88 | Supply and fix double wall corrugated high density polymer ethyl (HDPE) pipe for laying of electric cable of size 50mm outer dia and 38mm inner dia with IS 14930 (part 2) 2001 and 6mm thickness laid in trenches (including cutting of roads or any other hard surfaces and making good disturbed surfaces), wall poles including bends, sockets and other connected accessories complete all as specified and directed. |
| 89 | Supply and laying in trenches or fixing in walls/ poles or drawing through pipe XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium cinductor, 1100 volts grade cross sectional area 16 sqmm, 2 core including testing after laid and jointed complete all as specified and directed. |
| 90 | Cutting existing steel tubing for alterations or additions including insertion of tees, bends etc complete for 25mm bore GI pipe complete all as specified and directed. |
| 91 | Supply and fix GI tubing medium grade with all fittings laid in trenches and fixed complete to wall and ceilings or laid in floors as socket, bends/ elbow, union, tee etc for 25mm bore complete all as specified and directed. |
| 92 | Supply and fix 25mm bore gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed including taking down/ removing old unserviceable valve complete all as specified and directed. |
| 93 | Material and labour for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealedon surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmmmodular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch, complete all as specifed and directed. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate.All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly. |
| 94 | All as per item No 93.00 herein before but One ceiling/ exhaust fan point controlled by oneway switch and regulator, complete all as specified and directed. |
| 95 | All as per item No 93.00 herein before but One 3 pin 5 amp socket outlet point on the same board with other switches, complete all as specified and directed. |
| 96 | All as per item No 93.00 herein before butOne 3 pin 5 amps socket out let point on independent board, complete all as specified and directed. |
| 97 | All as per item No 93.00 herein before but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmmfor 15 amps power point, complete all as specified and directed. |
| 98 | Supply and fixing for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes, complete all as specified and directed. |
| 99 | Supply and fixing for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switchboxes, complete all as specified and directed. |
| 100 | Supply and fixing for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes, complete all as specified and directed. |
| 101 | Supply and fixing for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes, complete all as specified and directed. |
| 102 | Supply and fixing ceiling rose, surface type, three terminals 5 amps, complete all as specified and directed. |
| 103 | Supply and fix highly durable surface mounted 20 watts LED batten constructed of fire retardant engineering grade extruded aluminium body 100 lumen per watt and decorative end cap complete with tube rod, driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and directed. |
| 104 | Supply and fix LED batten fitting 2" length including drivers having energy consumption, 10/11 W, 230V, 50 Hz complete all as specified and directed. |
| 105 | Supplyand fix decorative type mirror light 10W with silver/golden coating as specified by E-in-C, 230V, 50Hz complete all as specified and directed. |
| 106 | Supply and fixing LED light fitting 10W bulk head luminaries with lamp holders etc complete with all accessories and including connecting upto with twin core twisted flexible cable suitable size of 230V, 50Hz complete all as specified and directed. |
| 107 | Supply and fix LED street light fitting 35 watt 230V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including connecting with 3 core 1 sqmm copper conductor cable including mounting GI (made out of 25mm dia light grade pipe 0.8m bent two shape including FI clamps, nut-bolts and making holes complete all as specified and directed. |
| 108 | Supply and fixing Exhaust fan plastic body 250mm sweep, single phase, 230 Volts, 50Hz, with nut and bolts, washers etc., and connecting up with three core twisted flexible copper conductor cable of suitable sizefrom fitting to ceiling rose, and making holes complete all as specified and directed. |
| 109 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed. |
| 110 | Supply and fix sheet metal enclosure single pole & neutral for 240 volts8 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed. |
| 111 | Supply and fix MCB single pole & neutral 240 volt 6 to 40 amps 10 KA, complete all as specified and directed. |
| 112 | Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA, complete all as specified and directed. |
| 113 | Material and labour for earthing complete with galvanised steet earth plate electrode 600 x600 x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the material and labour for :- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric (d) Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protec-tion pipe 7.50 metre long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
