Tender For Construction Of Balance Work Of Accommodation Hut Comprising Of 10 Rooms In Two Stories By Way Of Covering Of Newly Installed Frame Structure Of Huts And Providing And Fixing Of Puf Panels For Walls And Ceilings Including Electrification
Tender Value
19 Lakhs
Estimated cost
Bid Submission
26 Apr 2024
0 days left
EMD
38000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pahalgam → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Balance Work Of Accommodation Hut Comprising Of 10 Rooms In Two Stories By Way Of Covering Of Newly Installed Frame Structure Of Huts And Providing And Fixing Of Puf Panels For Walls And Ceilings Including Electrification, Etc. Complete With Alied Works For Yatra -2024.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Apr-2024 | Correction in BOQ | BOQ | 19-Apr-2024 |
| 2 | 19-Apr-2024 | Date Extension | Date | 23-Apr-2024 |
| 3 | 23-Apr-2024 | DE | Date | 26-Apr-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing PUF insulated sandwich panels for walls and roofing of total thickness not less than 50 mm. Panel shall have 0.5 mm thick precoated GI sheet on both side of Polyurethane foam confirming to IS 12436: 1988. The PPGI sheet should have plastic protective guard film of minimum 25 microns to avoid scratches while transportation . The PU foam shall be self-extinguishing, fire retardant. Also all joints of roofing would be fill with silicon .(Make- Jindal mectec /E Pack polymers/Modern Prefab systems) including all carriages of material etc complete. |
| 2 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including weldingand bolted with special shaped washers etc. complete. Hot finished welded type tubes(Make-JINDAL/TATA/SAIL/JSW) |
| 3 | Providing & fixing false ceiling at all heights with with (Gypsum panals) of size 0.600mmx0.600mx4mmfalse ceiling tiles of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal levelsuspended on inter-locking metal T-Grid of aluminium section of requiredthickness comprising ofmain-T runnerscross - T of required lengthsecondary intermediate cross-T oflength 600mm to form grid module of size 600 x 600 mm, suspended from ceiling fixed with dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.usingsquare edged GRG false ceiling tilesproviding nd fixing of gypsum board ceiling 4mm thick. |
| 4 | Providing and fixing specified board medium density exterior grade (Grade I)to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) :Flat pressed 3 layer particle board or graded wood particle board for atic and first floor.18 mm thick.2x 60\".0\"\"x 20\".0\"\"= 2400 .0 sft or 225 Sqm |
| 5 | Supply and fixing of door composited with50mm PUF panel (polyurethane foam conforming to IS 12436:1988 and PPGIsheet conforming. Sheet shall have guard film of 25 micron to avoid scratches during transportation).Doors with frame work of Aluminum anodized channel (profile) of 60mmx40mmx2mm thick including cost of02 Nos. Anodised Aluminium handles 125 mm,02 Nos. Anodised Aluminium sliding door bolt 250 x16 mm , 02 Nos. Anodised Aluminium tower bolt (barrel type) 200 x10 mm, 04 Nos. Anodised Aluminium butt hinges 75x45x3.2 mm etc complete |
| 6 | (Doors of size 1.00mx2.10m)including cost offrame etc complete |
| 7 | (Doors of size 0.75mx2.10m)including cost offrame etc complete |
| 8 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 andIS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanicallywherever required including cleat angle, Aluminum snap beading forglazing / panelling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-Charge including glazing,panelling and dash fasteners etc with all carriages of material. |
| 9 | Supply and fixing ofVentilator of size 0.45mx0.60mcomposited with mild steel ERW pipes for frames of sectional size 65x50x25mm & 65x35x25 mm and 55x40x20 mm for shutter including safety grill on outer side made with 10 mm thick square bar having centre to centre spacing of 10cm on both longitudinal and transverse axis.Window shutter is fixed with 5mm thickpoly carbonate glass of density not less than 1.20gm/cm3 including cost of02 Nos. 100x58x1.90 mm mild steel butt hinges,125 mm mild steelhandles ,02Nos.150x10 mm mild steel tower bolts etc complete. |
| 10 | Providing and fixing of approved makeelectrical fittings to hut rooms including providing of specified quality wire of required dia for both heating and lighting points with proper controlling arrangements like MCCB.s and electrical panel board etc complete job. ( Havels, BHEL , Crompton , Bajaj . V.Guard, Poly Cab, and GM etc or eqvillant make.) |
| 11 | Providing and fixing Stainless Steelcurtain rods on PUF Walls with two brass bracketsandBrass side Latoos fixed with brass screws and wooden plugs etc. or any other fixing arrangementwherever necessary complete. 20 mm diameter. |
| 12 | Providing and fixing Stainless Steel towel rodscomplete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour 600 mm long towel rod. |
| 13 | Providing and fixing Stainless Steel soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, |
AI Tender Summary
Tender Timeline
Apr 23, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Apr 19, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 23, 2024
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 26, 2024
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedApr 26, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 27, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender