Rural Development Department has published Tender For Temporary Piped Water Supply Scheme At.Murdhav Tq.Renapur Dist.Latur. Submission Date for this Tender is 15-04-2024. Water Supply Project Tenders in Latur Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Item No. 1 : Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to theepartmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. 90 mm dia. PE-100, 6Kg/Sq.cm |
| 2 | Item No. 1 A ) HDPE specials etc complete |
| 3 | Item No. 2 : Providing and supplying ISI mark CID/F reflux valves (non-return valves) of following dia including all taxes (Central and Local ), railway freight , inspection charges unloading from railway wagon , loading into truck, transportation upto departmental stores /site , unloading , stacking etc. complete. |
| 4 | Item No. 3 : Providing and supplying Air valves as per IS-10845 and MJP"s standard specifications of approved make and quality of following diameter including all taxes (Central and Local ), railway freight , inspection charges, unloading from railway wagon , loading into truck, transportation upto departmental stores /site , unloading , stacking etc. complete. 50 mm dia Double Ball |
| 5 | Item No. 4 :Excavation for foundation / pipe trenches in earth,soils of all types ,sand,gravel & soft murum, including removing the excavated material upto a distance of 50 meters and lifts as below, stacking and spreading as directed, manual dewatering ,preparing the bed for foundation and excluding backfilling ,etc.complete. |
| 6 | Item No. 5 : Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distace of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 7 | Item No. 6 Excavation for foundation / pipe trenches by blasting in soft rock and old cement and lime masonry foundation asphalt road includingremoving the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed by Engineering -in -charge, normal dewatering ,preparing the bed for foundation and excluding backfilling ,etc.complete. |
| 8 | Item No. 7 :Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction complete.Murum from excavated stuff |
| 9 | Item No. 8 Lowering,Laying and Jointing H.D.P.E. / M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II 140 mm dia. PE-100, 6Kg/Sq.cm |
| 10 | Item No. 9 Lowering , laying and jointing in position following C.I.D/F reflux valves, Butter fly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulictesting etc. complete. ( Rate for all class of valves) 80 MM DIA |
| 11 | Item No. 10 Providing and laying in situ 1:2:4 (M-150) grades of C.C. of trap/granite/ quartzit/gneiss metal for foundation and bedding including dewatering, form work, compacting and curing, finishing , etc. complete. With initial lift of 1.5 M below / above ground level. M-150/ 1:2:4 |
| 12 | Item No. 11 Providing and fixing in position air valve shaft including providing and fixing GI medium class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee , providing PCC block of M-150 concrete , 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (Type design attached) Foundation on Murum and Harder strata |
| 13 | Item No. 12 Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15cm layers with all leads and lifts including consolidation , surcharging, etc. complete. |
| 14 | SUBWORK :- PUMPING MACHINERYItem No1:- 150mm dia Sub pump set.Providing, erecting and giving test of7.5 HP/ 8 Stage 150 mm dia Sub pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump sheel be suitable for various delivery head and discharge with stainless steelshaft. Motor suitable for working on 415(+/-)10% volt 3 ph 50 c/s a.c. supply ,thrust corban bearing with stand entire hy .thrust. pump set shall be direct coupling with suitable strainer .pump should havesuitable discharge out late as per manufacture design .antithrust stream lined non return valve shallbe provided with pump 3mtr submersible copper conductor cable in single /double run, two pairs erection clamp 32 mm wx10mm thickshall be provided with pump. Q-LPH; H- M (MJP Mech. CSR 2023-24 page no. 1 item No pm 1-2-7 ) |
| 15 | Item No. 2:- 63 mm dia H.D.P.E. pipe.providing and errecting ISI mark,63 mm dia HDPE pipe in position for suction etc complete |
| 16 | Item No. 2b :-M.S.Special.providing and errecting M.S.Special for various diameter of pipe(MJP /Civil DSR 2023-24 page no 70 item no 7f) |
| 17 | Item No. 3:-Earthing. providing and errecting rod type earthing (electrode of20mm dia solidG.I. Rodor G.I. Pipe of40mmdia ) 2.5 mtr burried in earth or( driven in the earth with blows of moderate force ) with necessarydoubleG.I. earth strip complete errected connected to nearest switch gear earth terminal. (PWD electrical DSR page no 159 / 9-1-4) |
| 18 | Item No.4:- Flat flexible sub cableproviding and errecting flat flexible submersible cable with copper conductor 3 core , pvc insulated & pvc sheathed cable wire.size : 4sq mm (PWD electrical DSR 22-23 page no 204 / 12-4-9) |
| 19 | Item No.5:- Armoured cable.providing and errectingAluminium conductor, XLPE / PVC insulated Armoured cable 3.5 or 4core cable size 16 sq mm(PWD electrical DSR 2022-23 page no126 / 7-1-11) |
| 20 | Item No.6:- Rain Prinventive box.providing , errecting Box type Rain Prinventive box size=1.5X1X0.35& 16SWG with lock arrangement A( panel box)=5sqmtr (PWD electrical CSR 22-23 p. no. 106 / 6-1-6) |
| 21 | Item No.7:- plywood . providing , errectingplywood19mmthickness fixed to angle frame with necessary material( PWD electrical DSR 22-23 p. no.107 / 6-1-14) |
| 22 | Item No. 8:- Fuse bridge.providing , errecting H C pattern porcelain fuse bridge with base and H C fuse links 415/ 500 volt, 63Amp.capacity( PWD electrical DSR 2022-23 p. no102 / 5-10-3) |
| 23 | Item No. 9:- Triple Pole Switch. providing , errectingtriple pole iron clad /metal cladswitch& fuse32Amp 415/500 volt. ( PWD/DSR p. no. 84 item no. 5-1-1 ) |
| 24 | Item No. 10:- Volt meter. providing & errectinganalog type moving iron Voltmeterfor ACvoltage 0 to 500 volt range,50 c/s, flash type.( PWD/DSR 22-23 p. no.110 item no 6-3-8 ) |
| 25 | Item No. 11:- Ammeter. providing & errecting analog type moving iron Ammeterfor ACcurrent o to 30 Amp, directrange, 500 volt, 50 c/s flash type. (PWD/DSR 2022-23 p. no. 110 item no. 6-3-7 ) |
| 26 | Item No. 12 :- Indicating Lamp. providing & errecting LED type indicating pilot lamp with LED colours RED/ Yellow / Green] 230 / 250 Volt on provided box /panel with necessary material, wring & connectons. ( PWD/DSR 22-23 p. no. 115 item no.6-5-5 ) |
| 27 | Item No. 13:- Capacitor.providing & errectingbank of metalisedpolypropylene condensers with standard capacities of 1 , 2 , 3 , 5 , 7 , 12 , 15 , 20 & 25 kvar unit P.F. corre-ction operation on 3 ph 50 c/s500 volt + or- 10 %externally dischaging resis-tancs earthing terminals & built up angle iron or chennel iron framework&provided with terminal cover box completed& tested. (MJP Mech. CSR 2022-23 page no17 /cp-1) |
| 28 | Item No.14:- DOL /FASD Starter.providing & errectingDOL /FASD starterto operate squirrel cage induction motor working on 380-440 volt, 3 phase,50 c/s with no volt coil and over load Relay (range 30 Amp )with nacassary material and connected to supply, etc completed.for Up to 7.5 hp capacity(MJP Mech. CSR 2022-23 page no 18 / LG1-1) |
| 29 | Item No. 15:- RefluxValve 50 mm dia. providing & errecting in position RefluxValve 80mm dia and class including necessary jointing accessories (flanges, nut, bolts and rubber packing) as per the specification.(MJP /Civil DSR page no 131&135 item no SECXII-1a(iv)&4(iv) |
| 30 | 18 % G.S.T |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
