Delhi University has published Tender For Making Provision Of Ramp With Stainless Steel Railing, Tactile, Cupboards And Other Repair Works At Delhi University Student Union Office, And Signage For Law Center-Ii And Vac Office Dream Building, University Of Delhi.. Submission Date for this Tender is 18-04-2024. Ramp Work Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 2 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 3 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab upto 0.50 sqm |
| 4 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work |
| 5 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 6 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). |
| 7 | Providing and fixing wooden moulded beading to door and window frames ith iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood 50x12 mm |
| 8 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 9 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm |
| 10 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm |
| 11 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 12 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube |
| 13 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 14 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
| 15 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 16 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all completeas per drawings, pecification and direction of the engineer-incharge.( Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage |
| 17 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
| 18 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes |
| 19 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 20 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 25 mm nominal bore |
| 21 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 22 | P/F minimum 8 mm thick laminated [Mat finished] wooden flooring of approved make consisting of panels of standard size with interlocking system. The panels having clcick system touge and groove joint. The floating laminated flooring shall be laid over a 0.20 mm thick polythene film a vepour barrier and 2 mm to 3 mm thickthick foam or equivalent under layer to reduce inpact sound etc in approved shall all complete as per manufacturers specification and direction of Engineer-in-charge all height and levels etc Pergo original or equivalent for flooring (Vista and equalent Make) |
| 23 | P/F PVC flooringof approved quality 2 mm thick with adhesive ccomplete. as per the direction of Engineer-in-charge. |
| 24 | P/F PVC pipe of approved quality, thickness, ISI marked as per IS:4985 (Finolex or equivalent) as per direction of Engineer-in-charge i/c making the joints leak proofa) PVC pipe 80 mm dia nominal bore. |
| 25 | P/F PVC floor trap (nahni trap) 100 mm inlet and 100 mm outlet cutting space in floor and fixed with necessary cemetn cocnrete (1:1.5:3) and PVC solvent etc all complete. |
| 26 | Providing and fixing stainless steel name plate with digital printed plates with direction symbol etc. complete as direction at site. |
| 27 | P/Fwooden cupboard of depth upto 450 mm with shelves, top, bottom, sides & shutters with19 mm thick commercial board (Duro/ Centuary or equivalent)and cover with 1 mm thick laminate i/c 6 mm thick commercial ply (Duro/ Centuary or equivalent) on back, teak wood beading on edges, multipurpose lock, polishing and painting etc all complete as per direction of Engineer-in-charge (Measurement will be made for front portion only) |
| 28 | P/F 8 mm thick table top glass of required size i/c buffering the edges alround the glass with corborandum stone etc complete as per direction of Engineer-in-charge. |
| 29 | P/F CPVC F T A/ M T A with reducer sokit 20 mm dia. of approved quality(ISImake) |
| 30 | P/F CPVC F.T.A./ M.T.A. (Brass Insert)with reducer sokit 25 mm dia. of approved quality (Suprimemake) |
| 31 | P/F gun metal gate valve 25 mm dia.(DRP make or equiavlent) of approved quality |
| 32 | Taking out and refixing brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: avalible free of cost at site etc completeas per direction of Engineer-in-charge. |
| 33 | Repairing the steel A.C (BRC cage) by ccutting, welding etc complete as per direction of Engineer in-charge. |
| 34 | Taking out and refixing wooden signage bord with vinayal computerized digital star flax printing color and shade including removing old latter etc complete as per direction of Engineer in-charge. |
| 35 | Repair the damaged GI pipe line with required GI pipe and fittings etc complete as per direction of Engineer –in-charge (15 to 25 mm) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
