Ministry Of Road Transport And Highways has published Crf 2023-24 Resurfacing Of Itvai-Vadpada-Borikuva-Fulvadi Road Ch Km 0/00 To 16/4 (Working Section Ch Km12/8 To 17/200, Ta.Kukarmunda, Dist. Tapi. Submission Date for this Tender is 15-04-2024. Road Work Tenders in Tapi Gujarat. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting trunk vegetation, grass bushes, shrubs, saplings and tree girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials (C) by mechanical means in area of light jungle |
| 2 | Box cutting the road surface to proper slope & camber for making a base for road work including compacting at O.M.C. and removing the excavated stuff, and depositing on the road side slopes as directed with all lead and lift. |
| 3 | Construction of granular sub-base 100 mm thick by providing machine crushed B.T. material satisfying MORT&H specification (Fifth revision) of grading III including spreading in uniform layer with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density etc. complete. |
| 4 | Construction of granular sub-base 200 mm thick by providing machine crushed B.T. material satisfying MORT&H specification (Fifth revision) of grading V including spreading in uniform layer with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density etc. complete. |
| 5 | Providing and laying wet mix macadam base course 250 mmthick in two layers as per MORTH specification using machine crushed B.T. chips as per required gradation, mixing with required optimum quantity of water, conveying the mix to site of work, spreading in to grade and camber withpaver/mechanical means and consolidation each layer with vibratory roller to aschieve the desired density including cost of material labour plant and equipment etc. complete. |
| 6 | Providing and applying priming coat with Emulsion SS-I at the rate of 7.50 kg/ 10 Sq.mt. including cost of asphalt and preparing the surface heating, and applying etc. complete. |
| 7 | Earth work for embankment including breaking clods, dressing with all lead and lift including watering, rolling and consolidation of sub grade in layers at O.M.C to required dry density including filling the depression which occur during the process using vibratory roller 8 to 10 Tonne (E) From borrow area within 3.0 Km. lead |
| 8 | Rolling and watering of earth work in layers with power roller including filling in depression which occur during the process |
| 9 | Earth work in cutting in all sorts of soil and soft murrum including conveying and spreading the stuff embankment as and where directed within 200 meter from the end of cutting with all required lead and lift. |
| 10 | Excavation for foundation up to 1.50 mt depth including sorting out and stacking of useful material and disposing of the excavated stuff up to 50 mt. lead (1) Loose or soft soil |
| 11 | Providing and filling in foundation with ordinary cement concrete M100 mix and providing necessary vertical pin headers including form work,vibrating, ramming and curing complete. |
| 12 | Providing and casting in-situ ordinary cement concrete M150 mix and providing necessary pin headers including shuttering, scaffolding, laying, vibrating and finishing without V-grooves ( A ) Height from 0.0 to 5 Mt. |
| 13 | Providing and fixing in position ISI mark TMT (Fe-500) bar for temperature reinforcement for mass concrete pier/abutment returns including cutting bending and tying as required complete. |
| 14 | Supplying and fixing reinforced concrete heavy duty non pressure pipes with collars for culverts carrying heavy traffic as per Indian Railway Standard Specifications including setting thepipes in C.M. 1:2 watering and laying (to level or slope)of class NP3 1200mm diameter. |
| 15 | Providing and filling sand around the pipe including hand packing ramming, watering, filling measure boxes etc. complete as directed. |
| 16 | Wall painting two coats with plastic emulsion paint of approved brand and manufacturer on wall surfaces to give an even shade including throughly brushing the surface to remove all dirt, dust, mortar drops and other foreign matter. |
| 17 | Providig and fixing Guard stone as per IRC type design including white washing etc complete (I) Fixing in CC.C. 1:5:10 |
| 18 | Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts including setting and joining the pipes in C.M. 1:2 watering and laying (To level of slops of I.S. 458 / 1971 Class NP3 casted by vertically vibrated technology of following internal diameter. (iv) 300 mm dia. |
| 19 | Providing temporary all weather diversion suitable for double lane traffic during the construction period of box culvert including providing earthwork for embankment/Cutting as per site requirement,supplying, spreading and compacting 200 mm thick GSB grade IIin 5.50 mt. carriageway with providing all safety measures including red lamps/ signals at night for traffic and maintaining the diversion in condition till completion of work etc.complete as directed. |
| 20 | Providing and laying 50 mm thick compacted B.M. with B.T. aggregate as per MORT&H specification using Emulsion grade RS-1 for coat at 2.5 Kg./10Sq.mt. with mechanical sprayer and bitumen grade VG-30 for mixing at the rate 34.0Kg/M.T. i.e. 3.4 %of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibratory roller including providing all materials, equipments, tools and plants, oil, kerosene, fire wood, labour charges etc. complete |
| 21 | Providing and laying 50 mm thick Dense graded bituminous macadam with tack coat at 2.50 Kg/10 Sq.mt. of Emulsion RS-I by mechanical sprayer and using stone chips as per MORT&H gradation and asphalt VG-30 grade @ 4.50% (As per mix design)by total weight of mix for binder by batch mix hot laid process including transporting the mix and spreading the same by paver finisher and consolidation by vibratory roller including providing and operating required drum mix plant & machinery cost of fuel, asphalt, oil, lubricant & labour charges etc. complete. |
| 22 | Providing and laying 25 mm thick compacted Semi Dense Bituminous Concreteusing stone chips as per MORT&H gradation & VG-30 grade asphalt for mixing @ 5.0% by weight of total mix for binder of bitumen including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibratory roller including providing all materials, equipments, tools and plants, oil, kerosene, fire wood, labour charges etc. complete |
| 23 | Providing and laying quarry spall of approved quality including spreading, watering consolidation with vibratory roller including loading and unloading etc. complete. |
| 24 | Scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm.depth including stacking useful materials on road side and disposing off remaining stuff. |
| 25 | Picking of the bituminous surface using JCB excavator or by any mechanical means, cleaning and removal of loose and unsuitable material on the road surface including cost of fuel, oil, lubricant, labour charges and disposal of loose unsuitable material from site to the disposal site as directed by Engineer in charge. |
| 26 | Providing and laying hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 grams / Sq.mt. area. Thickness of 2.5 mm is exclusive of surface applied. Glass beads as per I.R.C. 35. The finished surface to be level uniform and free from streaks and holes. |
| 27 | Cat Eye/ Road Stud/ RPM:- Supplying Raised Pavement Markers made of polycarbonate and ABS moulded body and reflective panels with Micro compressed molding with microprismatic lens (No Glass bead lens) capable of providing total internal reflection of the light entering the lens face and shall support a load of 13635 kgs.tested in accordance to ASTM D,4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 - DO III Dt 11.06. 1997. The height,width and length shall not exceed 20 mm, 130 mm and 130 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35+/- 5 degree.The body of the marker should having finger grip for easy and accurate placement and application with epoxy / bituminous Adhesive as recommended by the manufacturer of the marker. The color of the marker should be as per the IRC 35-2015 and as directed by Engineer-ln-carge. |
| 28 | Direction (Junction) Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size 244x122 cms. rectangular as per design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ; reflectorised with High Intensity Prismatic Grade retro refiective sheeting of Type-4 as per ASTM D- 4956 and latest M.O.S.T. Specifications; 4.0mtr (2 Nos.) long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 50x50x5mm; painted with bestquality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each leg including excavation, curing etc. complete under the supervision of engineer in charge. A warranty for 7 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (B) Class-B Type-4 Retro Reflective sheeting |
| 29 | Cautionary Warning Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size 90 x 90 x 90 cms. equilateral triangle as per design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T. Specifications; 3.6mtr longstand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and white bends. The details of symbol foreach board shall be as per theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc. complete under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting |
| 30 | Hazard Marker Sign :-Providing and fixing sign boards made out of 2.0 mm aluminium sheet / 4 mm ACP (Aluminum composite Panel); size 90x30 cms. rectangular as per design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 1.8mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and white bends. The details of symbol foreach board shall be as per theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc. complete under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting |
| 31 | Village Name Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size 90x60 cms. rectangular as per design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ; reflectorised with Micro Prismatic Grade retro refiective sheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T. Specifications; 3.3mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and white bends. The details of symbol or inscription/letters /umerals for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg. including excavation, curing etc.complete under the supervision of engineer in charge. A warranty for 10 years for the Retro eflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting |
| 32 | Informatory Signs:- Providing and fixing Informatory Signs made out of 2mm aluminium sheet, size 80 x 60 cms rectangle, as per the design of IRC-67-2012.Pre treated with phospheting process and acid etching coated with one coat of epoxy primer and two coat of best quality epoxy paint, refloctrorized withretro reflective sheeting as per the latest M.O.S.T. specification, 3.1 Mt. long stand post and frame fabricated from suitablesize iron angle of 35 x 35 x 3 mm, 75 x 75 x 6 mm as required painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 cms for each leg, including excavation curing etc. complete under the supervision of Engineer-In-Charge (B) High Intensity grade. |
| 33 | Regulatory / Mandatory Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size 60 cms Dia Circle as per design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type 11asperASTM D-4956andlatest M.O.S.T.Specifications;3.6mtrlong standpost of75x75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with best quality epoxy coatings in black and white bends. The details of symbol foreach board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc.complete under the supervisionofengineerincharge.Awarrantyfor10yearsfortheRetroreflectivesheetingfrom original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting |
| 34 | Chevron Sign:- Providing and fixing sign boards made out of 1.5mm aluminium sheet/3 mm ACP (Aluminium composite Panel); size 60 x50 cm as per design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with Micro Prismatic Grade retro refletivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T. Specifications; 3.3 mtr. long stand post of 75 x 75 x6mm / 65 NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 50 x 50 x 5mm; painted with bestquality epoxy coatings in black and white bends. the deails symbol or inscriptio/ numerals for each board shall be per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blacof size 45 x 45 x 60 Cms. for each leg. Including excavation, curing etc. complete under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeing from originaa manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective Sheeting |
| 35 | Providing and fixing 5th kilometer stone of precast C.C. 1:2:4 including necessary reinforcement as per I.R.C. type design in C.C. 1:4:8 including painting and lettering etc. complete. |
| 36 | Providing and fixing ordinary kilometer stone of precast C.C. 1:2:4 including necessary reinforcement as per I.R.C. type design in C.C. 1:4:8 including painting and lettering etc. complete. |
| 37 | Providing and fixing hectometer as per I.R.C. type design including painting lettering etc. complete fixing in C.C. 1:5:10 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
