Military Engineer Services-MES has published Tender For Provision Of Parking Shed Including Covered Pathway Connecting To Comd Offrs Mess And Other Allied Services Under Ge (Fw) Kolkata. Submission Date for this Tender is 24-04-2024. Footpath Work Tenders in kolkata West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil. |
| 2 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc. and getting out in soft/ loose soil complete all as specified and directed |
| 3 | Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil complete all as specified and as directed. |
| 4 | Returning,filling in, including,spreading,levelling,watering and well ramming in layers not exc. 25cm in soft loose soil complete all as specified and directed. |
| 5 | Removing excavated material exc.250 m but n.exc.500 m and depositing where directed. |
| 6 | Material and labour for plain cement concrete type C-2, 1:3:6 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and directed |
| 7 | Material and labour for brick work with sub class B brick straight or curved on plain exc 6m mean radius built in CM (1:6) and pointedin CM (1:4) complete all as specified and as directed. |
| 8 | Material and labour for rendering 10mm thick on brick wall or concrete surface in cement mortar (1:4) finish even and smooth without using extra cement complete all as specified. |
| 9 | Material and labour for hardcore of gauge n exc 63 mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface using broken stone or boulderscomplete all as specified and as directed. |
| 10 | Material and labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed . |
| 11 | Supply and fix plate girder or single stanchions ,Rolled sections as in main and cross beams, built up of beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connectionswithout any attachment of grade Fe-410- W(Gde- E-250) quality- B complete all as specified and directed |
| 12 | Supply and fix mild steel screw bolts neck dia 10 to 16mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and directed |
| 13 | Supply and fix mild steel screw bolts neck dia 10 to 16mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm but n exc 15cm long complete all as specified and directed |
| 14 | Supply and fix mild steel bolts dia of neck exc 16 mm but n. exc 20 mm. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long complete all as specified and directed |
| 15 | Supply and fix ornamental MS framed work such as grills of railing ,gate,gratings etc with end of bars shouldered and revets welded etc framed guard bars barrel iron door ladder framed balusters walk ways,railing, conforming to Fe-290, Gde-E-165,including, complete all as specified and as directed. |
| 16 | Supply and fixfor plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe-410- W(Gde- E-250) quality- B complete all as specified and directed |
| 17 | Material and labour for preparation of new and previously un-treated steel surfaces of any description, not otherwise described over 10cmwidth or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed. |
| 18 | Material and labour for preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed. |
| 19 | Material and labour for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 20 | Material and labour for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 21 | Supply and fix for 1.25mm thick plain, black, mild steel sheeting, in doors, valley gutters, drip and straight flashings (length and girth as fixed) in provided to welding complete all as specified and directed. |
| 22 | Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 23 | Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 24 | Material and labour for 100 mm thick, D-2, 1:4:8(using 40mm graded crushed stone aggregate) as in sub base of concrete finished even and smooth without using extra cement complete all as directed.. |
| 25 | S&F 35mm thick precast cement concrete Type B-0 (1:2:4)(using 12.5 mm graded crushed stone aggregate) louvers and jallies including all moulding, but excluding frameset in cement morter 1:4 as in repair, complete all as specified and as directed. |
| 26 | Material and labour for use and waste for form work to sides and soffits of floor or roof beams , beam haunching , girders , bressummers , lintels , cantilevers , shelves including supports , overhangs etc also splays between floors and beamsfor rough finished surfaces of concrete flat complete all as specified and directed |
| 27 | Material and labour for RCC type B1 1:2:4 (nominal mix) ( 20mm grade aggregate ) as in beams, cantilevers, bressummers , lintels over 1.5 mtr spanspecified and as directed. |
| 28 | Material and labour for TMT Bars 10 mm dia and over, cut to length, bent to shape required including crank-ing, bending and bindingwith and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed. |
| 29 | Material and labour for Mild steel TMT bars 6mm and 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed. |
| 30 | Material and labour for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups , spacers and binders cut to length , bent to shape requiredas in reinforcement and binding with MS wire ( annealed ) not less than 0.90 mm dia complete all as specified and directed . |
| 31 | Material and labour for non - skid (Matte finish) coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/ steps treads etc. set and jointed over 15mm thick screed bedin neat cement slurry and pointed in white or coloured cement to match the shade in joint free complete all as specified and as directed. |
| 32 | Material and labour for non - skid (Matte finish) coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting/dado/ steps riser etc. set and jointed over 10 mm thick screed bedin neat cement slurry and pointed in white or coloured cement to match the shade in joint free complete all as specified and as directed. |
| 33 | Material and labour for RCC 1:1½:3, type A1 (using 20mm grade stone aggregate)(NOMINAL MIX); stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, andlandings; etcas specified and ditected. |
| 34 | M&L RCC 1:1½:3, type A1(NOMINAL MIX) (using 20mm grade stone aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. (NOTE: MS reinforcement shall be measured and paid seperately) |
| 35 | Material and labourfor RCC 1:1½:3, type A1 (NOMINAL MIX) (using 20mm grade stone aggregate) as in Columns, pillars, piers, posts and strutscomplete all as specified and as directed. (NOTE: MS reinforcement shall be measured and paid seperately) |
| 36 | Material and labour for RCC type B1 (NOMINAL MIX) (1:2:4) using 20 mm graded aggregatein floors Slabs, roofs, landings, balconies, canopies, deck slabs and in shelvescomplete all as specified and as directed. (NOTE: MS reinforcement shall be measured and paid seperately) |
| 37 | Material and labour for RCC type A1 (1:1½:3) (NOMINAL MIX) using 20 mm graded aggregates in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under reamed piles and mass concrete complete all as specified and directed. (NOTE: MS reinforcement shall be measured and paid seperately) |
| 38 | Use and waste of form workto sides of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batterfor rough finished flat surface of concrete all as specified and directed |
| 39 | Use and waste of form workto sides of columns, pillars, posts, struts, pairs and stanchions, rectangular or square for rough finished flat surfaces of concrete all as specified and directed |
| 40 | Use and waste of form work to stair cases with slopping or stepped soffits including risers and stringers (excluding landing) all as specified and directed. |
| 41 | M&L Preparing new Surfaces of Walls and applying two Coats of Cement Base Paint over one coat of cement primer, complete all as specified and as directed. |
| 42 | Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed.. |
| 43 | M & L for concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables of 1.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including PVC conduit terminated in modular switch boards for fixing of switches, sockets, fan regulators etc for the following(a) One light point or one fan pointor bell point controlled by one switch |
| 44 | All as per item No 43 but one 3 pin socket outlet, 5 Amp independent |
| 45 | All as per item No 43 but one 3 pin socket outlet, 5 Amp on the same board with other switches |
| 46 | S & F Modular switch 1 way 6A, 1 module complete all as specified and as directed. |
| 47 | S & F Modular Socket 6 A- 2/3 pin combined 2 module complete all as specified and as directed. |
| 48 | S & F Modular Bell push 6A, 1 module complete all as specified and as directed. |
| 49 | S & F Modular Fan step regulator, 120W- 2 module complete all as specified and as directed. |
| 50 | S & F Modular type White cover plate with frame 3 module complete all as specified and as directed. |
| 51 | S & F Modular type White cover plate with frame 4 module complete all as specified and as directed. |
| 52 | S & F Modular type Metal Flush box 3 module complete all as specified and as directed. |
| 53 | S & F Modular type Metal Flush box 4 module complete all as specified and as directed. |
| 54 | S&F Ceiling rosethree terminals polycarbonate , isolated body completeall as specified and directed. |
| 55 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specifide and directed. Make: Philips / Bajaj /Havells. |
| 56 | S & F in repair Recess mounting15 W LED Slim round down lighter made of PDCAL with high efficient LEDs & Glare free opal diffuser,IP20complete all as specified and as directed. Make: Havells EDGEPRORDDLR15WLED857Sor equivalent make Philips/crompton |
| 57 | M & L for sub main wiring with 4 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm as earth continuity conductor drawn through and including concealed PVC conduit of size 25 mm including smooth the disturbed surface complete all as specified and directed. |
| 58 | M & L for sub main wiringwith 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through & including PVC conduit of suitable size in Surface/concealed complete all as specified and directed. |
| 59 | S & F Sheet metal enclosure for MCB DB double door 240V single pole & Neutral 8 way with common bus bar complete all as specified and directed. . Make: Legrand or equivalent of L&T/Havells |
| 60 | S & F MCB "C" series single pole 5 to 32 Amps, breaking capacity 10KA complete all as specified and as directed.. Cat No. 408587, Make: Legrand or equivalent of L&T/Havells |
| 61 | S & F MCB four pole , 63 Amps with breaking capacity 10kA,complete all as specified and as directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
