Military Engineer Services-MES has published Tender For Special Rep To Centrifugal Pump Set Of Capacity 25 Hp For Mandir Pump House And 75 Hp For Old Pump House Under Age E / M-Ii Subroto Park And Sr To Ci / Gi Pipeline Of Smq Area Of Hq Wac At Subroto Park. Submission Date for this Tender is 01-05-2024. Submersible Pump Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 24-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-05-2024 |
| FileName | File Description | File Size |
| 4ed289f7-4e91-4236-b5a6-27ca9cb7c068.html | Tender Notice | 0 KB |
| BOQ_726793.xls | Tender Document | 0 KB |
| TenderDocus.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid,bedded and pointed in any mortar complete all as specified and directed by Engr-In-Charge. |
| 2 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20 mm screed bed in cement mortar 1:6 complete all as specified and directed. |
| 3 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed by Engr-In-Charge. |
| 4 | M&L forglazed ceramic coloured tiles of size 350 x 250 x 7mm/450 x 350 x 7mm thick over and ncluding 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces,set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specifed and directed. |
| 5 | M&L for Vitrified coloured tiles(600x600)x9/10mm thick in floors etc.Set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including over screed bed or bedding layer ofmortar15 mm thick laying floor finished in cement mortor 1:6 complete all as specifed and directed. |
| 6 | M&L for Vitrified coloured tiles(600x600)x9/10mm thick in skirting etc.Set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick plastering in CM 1:4 as in backing coat of tiles complete all as specifed and directed. |
| 7 | Dismantlinglooseconcrete coverof RCCcolumns,beams,slabschajjas andthelikeasdirected,rougheningandcleaning concretesurfacewithsteelwire brushes,washed withwater and allowedtodry, inclderusting ofsteel reinforcement,providingfabric mildsteelwiremesh75 mmx 75 mmx 2 mmdia asreinforcementtoconcrete. Afterplacingtheadditionalreinforcementallconcretesurfacesshallthoroughlyscrubbedwithbrushes,washedwithwaterandalloytodry.Tothissurfacesapplychemicalpolycreteadmixtureattheratenotlessthan2%byweightofcement andproviding minimum30 mm thick (average thickness)gunniting mix(using1 partofordinaryPortland cement53 Gradeand2parts ofghaggarsandmixedwithadhesive/ admixtureattherateas directed) with apressureof2to2.5 KgperSq cmbygunnitingmachineandsurfacesfinishedevenandfair,inclnecessarypadding,shuttering / formwork. Including5 mmthick cementplasterinCM(1: 4 )complete allasspecifiedanddirectedbyEngineer - in -charge. Note:- (a) The rate is inclusive forscaffolding or reqd necessary arrangement for multi-storey bldg external gunniting. |
| 8 | M & Lforcompleteremovalofexistingrooftreatment (Mud puska, Cement Tiles or Old APP Roof treatment) including bedding layer in cement mortar/Mud anddisposedfrom MoD landcomplete all as specified and directed by Engineer-in-charge. |
| 9 | M&L for PCC 1:2:4type B1 using 20mm graded aggregate mixed with3.00% liquid water proofing compound of weight of cement laid 25 mm thickness as in padding over roof slabs for providing proper slope to the concrete padding, surface finished even and smoothwithout using extra cement complete all as specified and directed by Engineer-in-charge. Note:- WPC shall be measured and paid seperately. |
| 10 | Supply only integral water proofing compound complete all as specified and as directed. |
| 11 | M&L for five layer prefabricated atactic polypropylene polymer (APP) modified 3 mm thick membrane ( weight not less 3 kg/sqm) reinforced with 160 gms polestar non-woven fabric with scratched tool before finishing roof surface. When the concrete surface is still green, 10 mm thick 1:4 cement plaster shall be laid, the roof surface shall be thoroughly wire brushed washed dried up and cleaned of all foreign matter and dust prior to the application of primer on the dried surface, one coat of approved bituminous primer having density in the range of 0.87 to 0.89 / kg at 25 degree and viscosity of 70 to 160 CPS manufactured by the same manufacturer @ 0.40 litres/sqm shall be applied. APP membrane shall be laid on primed surfacetorch application method after allowing 24 hours of primer to dry. Laying of APP membrane shall be commenced at the lowest level and worked upto the crest. APP membrane will normally be laid in length at right angle to the direction of slope. The overlaps shall be of minimum 100 mm on longitudinal direction and 150mm on the transverse direction. All overlaps shall be bonded with bitumen primer and levelled by the heating the overlaps with butane torch. This treatment shall be done by theapproved authorized applicator. Guarantee of treatment shall be for 10 years. Thereafter APP membrane shall be painting with two coat of water proofing paint with aluminum finish. (ii) Independent testing of membrane for the approval technical parameters specified hereinafter shall be carried out the approved laboratories like National test house any other Govt approved laboratory having facilities for the testing of membrane. |
| 12 | M&L for two coat of water proofaluminum paint incl preparation of newly or previously untreated surfaces of any description, over 10cm width or girth, not otherwise described complete all as specified and directed by Engineer-in-charge |
| 13 | S&Finrepair110 mmborePVC (SWR ) pipesinglesocketedinany lengthwithrubber ringjoints, laidintrenchesorinfloorsetcincludingremovingfromsite complete all as specified and directed by Engineer-in-Charge. |
| 14 | S&F 110mm bore pipe PVC (SWR) bends any radius with oval acess door complete all as specified and directed by Engineer-in-Charge |
| 15 | Dismantling water tank and removing to storeexeeding 250 but n.exc 500 ltrs complete all as specifed and directed. |
| 16 | S&F for rotational moulded polyethylene water storage tanks triple layers of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule complete all as specifed and directed. |
| 17 | Demolition of concrete of any description and in any position not otherwise specifically provided for.complete all as specified and directed by Engr-In-Charge. |
| 18 | M & L for 75mm thick PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in plinth protection complete as directed by Engr-in-Charge. |
| 19 | M&L for 75 mm thick PCC type D-2, 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and directed. |
| 20 | M&L for Sand filling under floors or in foundationincluding watering and consolidationcomplete all as specified and directed. |
| 21 | M&L for 60mm thick, M-30 Grade Machine pressed precast concrete pre-painted interlocking paver block any shape and size casted in plastic moulds and compated on vibratory table confirming to IS 15658-2006 with grey cement and pigmentcomplete all as specified and directed. |
| 22 | M&L for Providing, cement concrete in roof/side kerbs or mud stops, rounded or chamfered on edges making good disturbed surface of ground complete all as specified and directed. |
| 23 | Taking down cementplaster of any description on brick or concrete surfaces of walls or ceilingetc incl. Raking out joints ,haking for key and scrubbing down with waterincluding removing debries out site MOD land complete all as specified and as directed by Engr-in-Charge. |
| 24 | M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished surafaceseven and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge. |
| 25 | M&L for complete removal of existing treatment from external surfaces of walls by brushes and washing down and stopping of surface and levelling / edging the disturbed portion plane/edges using necessary filling compound of putty to obtain smooth/regular/even finish surface with using of sand paper etc and prepare surface , applying two coats ofexterior weather proof (coat) paint on plastered/conrete surfaces of walls, paths , etc.,over a coat of cement base paint primer complete all as specified and as directed by the Engineer-in-Charge. |
| 26 | Taking down chowkhat or frames with shutters (with out taking of shutter from the frame) exc 1.5 sqm but n. exc 4sqm each complete all as specified and directed. |
| 27 | Taking down chowkhat or frames with shutters (with out taking of shutter from the frame) exc 1.5 sqm each complete all as specified and directed. |
| 28 | S &F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type, Thickness of laths in 1.25mm complete all as specifed and directed. |
| 29 | S and F Anodised power coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 30 | S&F Anodised power coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.® |
| 31 | S & F Anodised power coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 32 | M&L for 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber/aluminium frame work complete all as specified and directed. |
| 33 | S&F for 4.8 mm thick tinted sheet glass,fixed to aluminum frame work in panels n.exc 0.5 Sqm in each pane, complete all as specified and directed. |
| 34 | S&F in repair for 0.56mm nominal dia wire galvanised mild steel wire cloth and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specifed and directed. |
| 35 | S&F for Brass Mortice lock, vertical type, size 100mm 4 levers vertical complete all as specified and directed. |
| 36 | S&F in repair for door closer hydraulically regulated aluminum (dia cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000mmin width and of weight between 61 to 80 Kg,fixed as in repairs, complete all as specified and directed. |
| 37 | S & F in "E" board(Design: LACK & hill) : 605x605x4 mm thick, white pre laminated set embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanized iron imposed grid with 24 mm wide T-section exposed flanges which shall be power coated white. The frame work shall be comprise of main runner made from 0.33 mm thickgalvanised steel sheet and of size 24 mm X32mmX300 mm board spaced at 120 mm maximum center to center, hangers of GI wire4 mm dia to be fixed by approved rawal plug level and fasteners and screws etc.,The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall , flushing fitting of 1200 mm longer cross tee(with double stitching) to be interlocked between main runners at 600 mm center to center from 1200X600 mm modules cross tee longer than 600 mm to be supported independently . 600mm long cross tee centrally between the 1200 mm cross tee(with double stitching) to be interlocked between main runners at 600 mm center to center from 1200X600 mm modules cross Tee longer than 600 mm to be supported independently . The perimeter wall angle shall be 0.45 mm thick GS sheet of size 19 mm X 19 mm and 300 mm long of white colour all as per manufacturer"s instructions complete all as specified and directed by Engr-In-Charge. |
| 38 | Taking down carefully the existingpoint wiring of any size/capacity and type by disconnecting from the terminals complete including fittings and fixtures such as switches, sockets,ceiling rose, regulators and light fittings etcby unscrewing and removing from site complete all as specified and directed by engr-in-charge. |
| 39 | M & L for point wiring for one light /bell/fan point controlled by one 1 way switch with 1.5 sqmm (Nominal Area)PVC insulated un sheathed multi stranded copper conductor,FRLS 1100 Volts grade, with non metallicrigid PVC medium grade duty concealed conduitnot less than 20mm dia with accessories such as junction boxes, bends, tees etc. of suitable sizeincluding sunk cast iron or pressed steel terminal box for mounting switches, sockets fan regulators etc with 3 mm thick plastic laminated sheet top cover including continuous earth wire PVC insulated 1.50 Sq mm multi stranded copperconductor, FRLS 1100 Volts grade, connecting to common earth and earth dolly complete all as specified and directed. |
| 40 | All as per item no 39.00 but for one three pin switch socket 5 Amps plug point on independent board |
| 41 | All as per item no 39.00 but for one three pin switch socket 5 Amps plug point on sameboard |
| 42 | All as per item No 39.00herein before butpoint wiring with 2.5 Sqmm single coremulti stranded copper conductor for one three pin socket 15 Amps on independant board |
| 43 | Supply and fix switch Piano, Flush Button, Single Pole, One Way, 6 Amps, 230 Volts Complete all as specified and directed by Engineer-in-Charge |
| 44 | S&F of socket outlet 2in1, 3 pin 5 Amps flush type suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge. |
| 45 | S&F socket outlet 2in1, 3 pin 15/5 Amps flush type suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge. |
| 46 | S&F switch piano, flush type, 15 amps, single pole, one way suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge. |
| 47 | Supply and fix in replacementceiling rose surface type bakelite 65 x 50 mm with three terminals with ISI mark. Complete all as specified and directed by Engineer-in-Charge |
| 48 | S&F in replacement stepped type electronic fan regulator heavy duty flush type socket size onexisting phenolic laminated sheet Complete all as specified and directed by Engineer-in-Charge |
| 49 | Supply and fix exhaust fan steel body AC sigle phase 230V of size 300mm sweep with blades and frame and louvers complete all as specified and directed. |
| 50 | Supply and fix exhaust fan steel body AC sigle phase 230V of size 450mm sweep with blades and frame and louvers complete all as specified and directed. |
| 51 | Taking down unserviceable submain wiring of alluminiumof any size cable including batten/conduit complete etc and making good disturbed surfaces complete all as specified and directed. |
| 52 | M & L for submain wiring with three run of 4.0 sqmm singlecore PVC insulated butunsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts gradeIS:694 marked and one run of 4.0 sqmm PVC insulated butunsheathed FRLS cable for earth continuty conductordrawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittingsall laid/fixed concealed in wall/ceiling or surface in wall and surface conduit on ceiling complete all as specified and directed by Engr-in-charge. Note:- 4 runs of 4 Sqmm cable including one run of PVC conduit shall be measured as one unit length. |
| 53 | Taking down old unsv MCB DB SPN of any size. |
| 54 | Supply and fixingin replacement MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCAmild steel sheet surface mounting SPN 8 way 230 volts double door type regal gray horizontal type complete all as specified and as directed by Engineer-in-Charge.Note :- MCB shall be measured and paid seperately. |
| 55 | Taking down unserviceable SP/SPN MCBs of any capacities from the MCCB DBs /MCB DBs after disconnecting the electric supply,complete all as specified. |
| 56 | S&F MCB SP 6 to 32 Amps 10 KA, 240 volt "C" Series all as specified and directed by engineer-in-charge. |
| 57 | S&F MCB SP 40 Amps 10 KA, 240 volt "C" Series all as specified and directed by engineer-in-charge. |
| 58 | S&F MCB SPN 40 Amps 10 KA, 240 volt50 Hz "C" Series all as specified and directed by engineer-in-charge. |
| 59 | Supply and fixing LED lights fitting 1x 20 W, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 60 | Supply & fixing in replacement GI bracket for fixing street/ security light fitting made out of GI pipe medium grade 40 mm dia 1.50 Mtr long bent to required angle/ shapecomplete with MS flat iron clamp of size 40x5 mm, nut, bolt, washer of suitable size as per site requirement etc and fixed in pole/wall including two coats of aiuminium paint over a coat of redoxide primer to MS clamps , nut ,bolts etc complete all as specified and directed by Engineer-in-Charge. |
| 61 | Supply and fix in replacement of Street light fitting LED type,60 Watts 240 Volts luminous energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device., mounted on wall/pole/building,connection Complete all as specified and directed by Engineer-in-Charge |
| 62 | M&L for diamantling of Centifugal pumpset with induction motor of capacity 75 HP from the base and shifting it to MES Store all as specified and directed by Engineer-in-charge. Note:- T& P and machinery required for shifting and dismantling all included in the unit quoted rate. |
| 63 | M&L for dismantling of Centifugal pumpset with induction motor of capacity 50 HP from the base and shifting it to MES Store and after repairing work of pump house refixing it on the base frame in pump house including all necessary arrangmentsall as specified and directed by Engineer-in-charge. Note:- T& P and machinery required for shifting and dismantling all included in the unit quoted rate. |
| 64 | M&L for dismantling of Centifugal pumpset with induction motor of capacity 25 HP from the base and shifting it to MES Store all as specified and directed by Engineer-in-charge. Note:- T& P and machineryrequired for shifting and dismantling all included in the unit quoted rate. |
| 65 | Supply, installation, testing and Commissioning of Centrifugal Pump set with induction motor of capacity 75 HP, 1450 RPM,415 volt, 50 Hz coupled with Multistage horizontal split casing type pump , 50000 GPH water discharge ,60 mtr head mounted on heavy iron base frame,coupling angd guard complete with mandatory accessories all asspecified and directed. Note:- Heavy iron base frame with necessary fixing arrangments also included in the unit quoted rate of item. |
| 66 | Supply, installation, testing and Commissioning of Centrifugal Pump set with induction motor of capacity 25 HP, 1450 RPM,415 volt, 50 Hz coupled with horizontalsplit casing type pump , 15000 GPH water discharge, 60 mtr headmounted on heavy iron base frame,coupling angd guard complete with mandatory accessories all asspecified and directed. Note:- Heavy iron base frame with necessary fixing arrangments also included in the unit quoted rate of item. |
| 67 | Taking out existing MSpipe of size80mm dia fromsuction/trenches / walls / roof / floor etccomplete all as specified and as directed by Engineer-in-charge |
| 68 | All as per above item No 67.00 here-in-before but size 100 mm bore |
| 69 | All as per above item No 67.00 here-in-before but size 150 mm bore |
| 70 | Supplying, laying, jointing, welding & testing MS Pipe of size 80mm dia bore (Heavy duty class"C"),as per IS 3589 (1981) thickness 5.4 mm suitable for welded joints and flanged joints as per site requirement including painting with two coats of anti corrosive paint ,laid in trenches/bore or laying on floors for connections to centrifugal pump sets for suction and to connected outgoing water main pipe line complete including welding works and taking down unserviceablecomplete all as specified and directed. |
| 71 | All as per above item No 70.00 here-in-before but 100mm dia |
| 72 | All as per above item No 70.00 here-in-before but 150mm dia |
| 73 | Supplying, Installation, testing & commissioning in replacement of cubical type LT starter panel suitable for 415 V, 3 Phase, 4 wire 50 Hz AC supply system having front surface areafabricated in compartmentalized type tested assembly (prefrebly)having IEC code IEC-60439/IS 8623 designd from CRCA sheet steel of 3.00 mm thick , cleaning & finishing complete with suitable no of tank process for powder coating in approved shade, having 250 Amps. capacityTPN aluminium alloy bus bars of high conductivity, bottom base channel of MS section not less than 100 mm x 50 mm x 5 mm thick, fabrication shall be done in transportable sections. Incoming:-(a) MCCB 100A, FP, 415V 25kA - 01 Nos(b)Phase indicating lights (RYB) -one set (c) Phase sequence corrector -01 No . Outgoing(a) MCCB 63 Amp 3 Pole 25 KA- 4 Nos .(b) star delta starter suitable for 25 HP motor - 02 Nos (c) star delta starter suitable for 30 HP motor - 01 No (d)Start/Stop Push Button.-04 set(e) CTs of suitable size(f) Digital Amp Meter-04 Nos (g)Digital Voltmeter-01 No. Note:- Excavation & PCC work required to erect the panel and dismantaling of unserviceable panel ,removing connection also included in the unit quoted rate of item. |
| 74 | Supply and fixingof fully automatic star delta starter in sheet metal encloser with relay range 45-70 Amp with single phase protection featurefor 75 HP motor rating 415V , 50Hz 3 phase complete all as specified and directed. |
| 75 | Supply and fixingin replacement cast iron non return valve flanged end conforming to IS 5312 of size 80mm dia complete with rubber flange, MS nuts & bolts complete all as specified and as directed by Engineer-in-charge. |
| 76 | All as per above item No 75.00 here-in-before but 100mm dia all as specified and as directed by Engineer-in-charge. |
| 77 | All as per above item No 75.00 here-in-before but 150mm dia all as specified and as directed by Engineer-in-charge. |
| 78 | Supply & fixing in replacement of 100 mm foot valve complete all as specified and as directed by Engineer-in-charge. |
| 79 | Supply & fixing in replacement of 150 mm foot valve complete all as specified and as directed by Engineer-in-charge. |
| 80 | Supply, Installation, Testing and Commissioning of 150 mm dia, single phase, Motor Actuated Butterfly Valve with disc material of SS-304 & stem material of SS-410, with EPDM seat & nylon coating, hand wheel for manual operation and having 05 nos. limit switches for Open / Close condition and valve position indicator.The mounting shall be directon valve type and provided with top cover for actuator made out of CRCA sheet. Input Voltage: 230 V, A.C. Designed line pressure: 16 kg/sq cm. In built CPU:- Quad-core 64-bit ARM Cortex A53 clocked at 1.2 GHz Inbuilt 4 USB 2 ports In built Base Ethernet Port In built Micro SD port for loading your operating system and storing data In built wireless LAN and Bluetooth Low Energy The mounting shall be directtype using specialized arrangement of GI pipe of suitable size/thickness, complete all as specified and directed. |
| 81 | Supply, Installation, Testing and Commissioning of 100 mm dia, single phase, Motor Actuated Butterfly Valve with disc material of SS-304 & stem material of SS-410, with EPDM seat & nylon coating, hand wheel for manual operation and having 05 nos. limit switches for Open / Close condition and valve position indicator.The mounting shall be directon valve type and provided with top cover for actuator made out of CRCA sheet. Input Voltage: 230 V, A.C. Designed line pressure: 16 kg/sq cm. In built CPU:- Quad-core 64-bit ARM Cortex A53 clocked at 1.2 GHz Inbuilt 4 USB 2 ports In built Base Ethernet Port In built Micro SD port for loading your operating system and storing data In built wireless LAN and Bluetooth Low Energy The mounting shall be directtype using specialized arrangement of GI pipe of suitable size/thickness, complete all as specified and directed. |
| 82 | Supply, Installation, Testing and Commissioning of 80 mm dia, single phase, Motor Actuated Butterfly Valve with disc material of SS-304 & stem material of SS-410, with EPDM seat & nylon coating, hand wheel for manual operation and having 05 nos. limit switches for Open / Close condition and valve position indicator.The mounting shall be directon valve type and provided with top cover for actuator made out of CRCA sheet. Input Voltage: 230 V, A.C. Designed line pressure: 16 kg/sq cm. In built CPU:- Quad-core 64-bit ARM Cortex A53 clocked at 1.2 GHz Inbuilt 4 USB 2 ports In built Base Ethernet Port In built Micro SD port for loading your operating system and storing data In built wireless LAN and Bluetooth Low Energy The mounting shall be directtype using specialized arrangement of GI pipe of suitable size/thickness, complete all as specified and directed. |
| 83 | Supply, Installation, Testing and Commissioning of 80 mm dia, single phase, Motor Actuated Butterfly Valve with disc material of SS-304 & stem material of SS-410, with EPDM seat & nylon coating, hand wheel for manual operation and having 05 nos. limit switches for Open / Close condition and valve position indicator.The mounting shall be indirecton valve type and provided with top cover for actuator made out of CRCA sheet. Input Voltage: 230 V, A.C. Designed line pressure: 16 kg/sq cm. In built CPU:- Quad-core 64-bit ARM Cortex A53 clocked at 1.2 GHz Inbuilt 4 USB 2 ports In built Base Ethernet Port In built Micro SD port for loading your operating system and storing data In built wireless LAN and Bluetooth Low Energy The mounting shall be indirecttype using specialized extended type arrangement of GI pipe of suitable size/thickness, so that actuator mounting is at least 6 inches above ground level complete all as specified and directed. |
| 84 | S&F as in repairs mild steel work in framed work such as valve chamber frame and doors, straps, Ties Clamps, Motor pumpset base etc. and similar work confirming to Fe-290 Gde E-165 and incl painting to surfaces using two coats of metallic paint over a coat of red oxide primer of desired colour complete all as specified and directed. |
| 85 | M&L forearthing complete with GI earth plate electrode 600mmx600mmx6.0mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to and including galvanized iron strip of size 25X4 mm as earth strip by means of GI bolts, nuts, check nuts and washers earth pit surrounded by picked layer of coal dust and 15 mm thick layers of common salt and charcoal dust statting from ground below 15 cm of eartgh plate and upto 15 cm above the same and top and watering pipe 20mm bore of GI medium grade with funnel all as shown in electrical plateNO 5 of SSR Part I (1991)and connecting to earthing test point, including CI cover, frame and PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in earthing pit with CI cover and framing including necessary earth work etc, complete all asspecified and directed . |
| 86 | M&L for earth continuity conductor of size 25X4 mm galvanised strip fixed on walls / burried in ground with and including fixing arrangments on walls like porcelain insulators screws washers etc complete all as specified and as directed by Engineer-in-charge |
| 87 | S&F as in replacement flat PVC insulated submersible copper cable of size 10.0 sqmm 3 core,1100 volt grade complete all as specified anddirected by Engineer-in-charge. |
| 88 | S&F in replacement flat PVC insulated submersible copper cable of size 25.0 sqmm 3 core,1100 volt grade complete all as specified anddirected by Engineer-in-charge. |
| 89 | Disconnecting and removing unserviceable under ground cable 1100 volts grade from trenches / poles / walls / floors etc of size 185 sqmm 3.5 core complete all as specified and directed. |
| 90 | Supplying, spreading and compacting river sand in trenches for cable cushioning at bottom 8 cm andtop of cable 15 cm after punning downand stretching the cable all as specified and as directed by Engineer-in-charge. Note:- Only punned thickness will be measured & paid. |
| 91 | Supply & lay burnt bricks sub class "B" of old size laid dry in trenches as protection to cable all as specified and directed by Engineer-in-charge |
| 92 | Supply laying & jointing of PVC insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade laid in trenches / poles / on walls etc of size 185 sqmm 3.5 core complete all as specified and directed. |
| 93 | Supply & laying GI pipe light grade 50mm dia on poles / on walls / floor etc including S&F MS clamps made of 40mmx3mm iron strip complete all as specified and directed. |
| 94 | M&L for Construction of brick masonary valve pit of size 80cmx100cmx100cm (internal dimensions of chamber) depth to be reckoned from the top of PCC in foundation to top of MS cover with MS sheet cover 3 mm thick including frame of angle iron 40mmx40mmx 6mm with fixing arrangement, hinges and locking arrangement and two coat of synthetic enamel paint over a coat of red oxide primer on MS cover and frame including necessary excavation and earth work in any type of soil, returning filling in approved soil, removal of surplus soil to a distance not exceeding 50 Mtrs where directed, 150mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, brick work in cement mortar 1:6 and 15mm thick plastering in CM 1:4 to brick/concrete surfaces of walls, 100 mm thick PCC 1:2:4 type B-1 as in copping complete including dismantling of damaged valve pit all as specified and directed. |
| 95 | M&L for Construction of brick masonary valve pit of size 80cmx80cmx80cm (internal dimensions of chamber) depth to be reconed from the top of PCC in foundation to top of MS cover with MS sheet cover 3 mm thick including frame of angle iron 40mmx40mmx 6mm with fixing arrangement, hinges and locking arrangement and two coat of synthetic enamel paint over a coat of red oxide primer on MS cover and frame including necessary excavation and earth work in any type of soil, returning filling in approved soil, removal of surplus soil to a distance not exceeding 50 Mtrs where directed, 150mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, brick work in cement mortar 1:6 and 15mm thick plastering in CM 1:4 to brick/concrete surfaces of walls, 100 mm thick PCC 1:2:4 type B-1 as in copping complete including dismantling of damaged valve pit all as specified and directed. |
| 96 | Material and labourconstruction of brick masonry valve pit size 55cmx55cmx60cm (internal size of chamber)depth of chamber to be reckoned from the top of PCC in foundation to thetop of MS cover with and including 3 mm thick MS sheet and frame of angle iron 40mmx40mmx 6mm with fixing arrangement, hinges and locking arrangement and two coat of synthetic enamel paint over a coat of red oxide primer on MS cover and frame including necessary excavation and earth work in any type of soil, returning filling in approved soil, removal of surplus soil to a distance not exceeding 50 Mtrs where directed, 150mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, brick work in cement mortar 1:6 and 15mm thick plastering in CM 1:4 to brick/concrete surfaces of walls, 100 mm thick PCC 1:2:4 type B-1 as in copping complete including dismantling of damaged valve pit all as specified and directed. |
| 97 | Excavation in trenches in any type soil /rock (soft/loose/hard/dense soil/rock) n.exe 1.5 mtr wide and n.exe 1.5 mtr in depth for foundation laying of pipe etc n.exe 10 sqmm on plan and n.exe 1.5 mtr in depth and getting out complete all as specified and as directed by Engineer-in-charge. NOTE : while removing the pipe line, Contractor shall refixed the oldtiles as per existing . The quoted rates including for all the materials / t&p / machinery used in this item and no material can paid / measured seperately |
| 98 | Returning filling in including spreading levelling watering and well ramming hard / dense soil in layers not.exe 25cm each layers complete all as specified and as directed by Engineer-in-charge |
| 99 | Removal of excavated material & surplus spoil to a distance n.exe 50 mtr and depositing where directed at a level not exe 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-charge |
| 100 | Taking down cast iron water mains of 100mm bore including all fittings with spigot and socket end and lead joints including burning out joints and recovering lead complete all as specified and as directed by Engineer-in-charge |
| 101 | All as per above item No 100.00here-in-before but 150mm bore |
| 102 | All as per above item No 100.00here-in-before but 80mm bore |
| 103 | M&L for Cutting to cast iron pipes upto100mmbore before laying in position for insertion of new tees, branches, bend and new connection etc complete all as specified and as directed by Engineer-in-charge |
| 104 | All as per above item No 103.00 here-in-before but 150mm bore |
| 105 | Supply and laying cast iron pipes of 100mm bore with spigot and socket ends centrifugally cast class LA in any length laid in trenches complete all as specified and as directed by Engineer-in-charge . |
| 106 | All as per above item No 105.00 here-in-before but 150mm bore |
| 107 | All as per above item No 105.00 here-in-before but 80 mm bore |
| 108 | Supply and fixingand testing of CI fittings flange and sockets / all socketed / all flanged type such as bend upto 150mm bore (any type radius and angle) tapers any type (straight, bend, increasing, descreasing or double socket etc), Tee piece single branch, "Y" junction, double branch cross (all sockets or socket and spigot) collors, caps and plugs including dewatering complete all as specified and as directed by engr in charge.NOTE: Excavation earth work in any type of soil/Rockand run lead joints tighten joints rubber gasket shall be measured and paid seperately. |
| 109 | Supply and fixingin replacement of unserviceable sluice valve cast iron with iron spindle PN-1.6 and fly nut flanged both ends and drilled for jointing wheel head type conforming to IS 14846 including two flanged joints with nuts bolts and washers rubber insertion packing etc for 150mm bore pipe as in repairs and ISI marked complete all as specified and as directed. |
| 110 | All as per above item No 109.00 here-in-before but 100mm bore |
| 111 | Taking out existing GI pipe 100mm dia from trenches / walls / roof / floor etc including connection and cleaning for refixing or removal and making good to distrubed area (surface of walls / floor etc) complete all as specified and as directed by Engineer-in-charge |
| 112 | All as per above item No 111.00 here-in-before but size 80mm bore |
| 113 | All as per above item No 111.00 here-in-before but size 50mm bore |
| 114 | All as per above item No 111.00 here-in-before but size 40mm bore |
| 115 | All as per above item No 111.00 here-in-before but size 25mm bore |
| 116 | All as per above item No 50.00 here-in-before but size 20mm bore |
| 117 | All as per above item No 50.00 here-in-before but size 15mm bore |
| 118 | Supply and fixingGI tubing medium grade 100mm dia with all fittings complete laid in trenches / on walls / on ceiling / roof etc incl necessary suitable size of MS clamps / saddling on walls / ceiling etc complete all as specified and as directed by Engineer-in-charge. |
| 119 | All as per above item No 118.00 here-in-before but size 80mm dia bore |
| 120 | All as per above item No 118.00 here-in-before but size 50mm dia bore |
| 121 | All as per above item No 118.00 here-in-before but size 40mm dia bore |
| 122 | All as per above item No 118.00 here-in-before but size 25mm dia bore |
| 123 | All as per above item No 118.00 here-in-before but size 20mm dia bore |
| 124 | All as per above item No 118.00 here-in-before but size 15mm dia bore |
| 125 | Cutting and screwing to existing MS / GI steel tubing for alteration or addition to pipe line upto 50mm dia bore with new fittings and fixtures complete all as directed by Engineer-in-charge |
| 126 | All as per above item No 125.00 here-in-before but size 80 to 150 mm dia bore |
| 127 | Supply and fixingin replacement of unserviceable gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 50mm dia complete all as specified and as directed by Engineer-in-charge. |
| 128 | All as per above item No 127.00 here-in-before but size 40mm dia bore |
| 129 | All as per above item No 127.00 here-in-before but size 25mm dia bore |
| 130 | All as per above item No 127.00 here-in-before but size 20mm dia bore |
| 131 | All as per above item No 127.00 here-in-before but size 15mm dia bore |
| 132 | Supply and fixingin replacement of unserviceable PVC bib tap 15mm dia complete all as specified and as directed by Engineer-in-charge. |
| 133 | Supply and fixing in replacement Bib taps, chromium plated ,screwed down ,high pressurewith crutch or buttterfly handle ,screwed for iron pipe or for union suitable for 15 mm bore pipe completeall as specified and directed. |
| 134 | Supply and fixingin replacement of unserviceable PVC PTMT float valve 20 mm dia complete with PVC ball and connecting rod complete all as specified and as directed by Engineer-in-charge. |
| 135 | M & L for cutting MS pipe of any size and welding of flanged on both sides/single side of MS pipe as required on site for connecting the MS pipe/Valve/ Bend/Tee//NRV complete all as specified and directed. Note:- (i) The unit quoted rate included the rateof flanges, cutting,welding work nut,bolts and rubber packing required at site . (ii) MS pipe ,valve,Bend,Tee and NRV will be paid separately under relevant item of the schedule. |
| 136 | Supply & Fixing in replacement of CI Water Meter 80mm bore including rubber packing sheets, nuts, bolts etc complete all as specified and directed . |
| 137 | M & L for run lead joint suitable for spigot & socket CI/GI pipe 150 mm dia complete all as specified and as directed by Engineer-in-charge |
| 138 | All as per above item No 137.00 here-in-before but 100mm bore |
| 139 | All as per above item No 137.00 here-in-before but 80mm bore |
| 140 | Supply and fixingand testing ofMS Pipe bend of size 150mm dia bore (Heavy duty class"C"),as per IS 3589 (1981) thickness 5.4 mm complete all as specified and as directed by engr in charge. |
| 141 | All as per above item No 140.00 here-in-before but 100mm bore |
| 142 | All as per above item No 140.00 here-in-before but 80mm bore |
| 143 | M&L for making good for road to existing surfaces with using of patch premix bitumenous 25mm thick polymer based material over WBM 75mm thick including rolling etc all as specified and as directed by Engineer-in-Charge |
| 144 | Supply and fixingand testing ofMS Pipe Tee of size 150mm dia bore (Heavy duty class"C"),as per IS 3589 (1981) thickness 5.4 mm complete all as specified and as directed by Engineer-in-Charge. |
| 145 | S&F in replacement pressure gauge analong type 4" dia 0-10 Kg/cm (0-150 PSI) rating complete all as specified and as directed by Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
