Indian Oil Corporation Limited-IOCL has published Tender For Supply,Installation, Testing And Commissioning Of 04 Nos Of 30 M High Masts At Erpl Haldia (Phbpl). Submission Date for this Tender is 02-05-2024. High Mast Tenders in haldia West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Apr-2024 | Sale Period Extension | Date | 02-05-2024 |
| 2 | 25-Apr-2024 | Technical Corrigendum | Technical Bid | 02-05-2024 |
| 3 | 26-Apr-2024 | Technical Corrigendum-3 | Technical Bid | 02-05-2024 |
| FileName | File Description | File Size |
| e9dfc10d-f0a9-4c16-af7c-a3c18531e865.html | Tender Notice | 0 KB |
| Bidders_help_Document_for_1.pdf | Tender Document | 0 KB |
| BOQ_186615.xls | Tender Document | 0 KB |
| FAQs-IOCL-Online-EMD.pdf | Tender Document | 0 KB |
| GCC.pdf | Tender Document | 0 KB |
| PPEMatrix_Revised.pdf | Tender Document | 0 KB |
| Special_Instructions_to_t_2.pdf | Tender Document | 0 KB |
| Tender-Acceptance-Format.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Tender_Doc_New_merged.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | SITC OF 30M High Mast |
| 2 | "Supply, erection, installation and testing of 30M high mast: Supply, erection, installation and testing of 30M high mast shaft in three sections suitable for wind speed as Per IS-875, with rais ing lowering system comprising, head frame, luminaries carriage suitable to install 24 nos luminaries of BENP-20FL-350W LED of BajajMake or Equivalent in symmetrical arrangement, double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral po wer tool motor, manual handle, junction box, lightening finial, including 1 set foundation bolts manufactured from special steel alo ng with nuts, washers, anchor plates and templates. This includes Supply and installation of 24 nos. Integral LED Flood Light Lumina ire with the following components: 02 nos Aluminum Cast luminary body, 02 nos Electronic Circuit & LED drivers, 02 nos Weather proofTransparent Cover, 02 nos Luminary Mounting Clamps, 02 nos LED Assembly. 350 Watts and 1 set Within Luminary Interconnection. Suppl y and installation of 2 nos. LED type single dome aviation obstruction light is also required with one high mast. This also includesSupply and installation of 1 no. outdoor stand mounted feeder pillar with 63A, 4-pole MCCB incomer, single dial time switch, 45A TPcontactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incomi ng 25/35 sq. mm and outgoing 16 & 2.5 sq. mm terminals. The Control Panel shall be of flame proof type suitable for gas group IIA/II B. Complete Design, Construction of foundation with M25 grade concrete for the highmast considering the safe soil bearing capacity a t site (provided by IOC) with all materials and labour. Lightning Finial shall be insulated from body and head frame of High Mast an d a separate down conductor (1Rx1Cx(25/35) sq mm Aluminium Flexible Cable) shall run from the lightning finial to an earthing bolt i ndependent of the high Mast structure. Electrical accessories like plug & socket, power tool motor etc at the bottom of high mast sh all be flame proof type suitable for gas group IIA/IIB. Electrical Accessories like plug & Socket, Power Tool etc at the bottom of h igh mast shall be of flame proof Type Suitable for Gas Group-IIA/IIB. Ref.- Technical specifications." |
| 3 | ALLIED CIVIL WORKS |
| 4 | "Suuply of Power cable for High Mast: Supply of Aluminium LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type S T-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40% AL,3.5CX35mm²,A2XFY" |
| 5 | " GI Cable Tray: Supply, installation & fixing of prefabricated perforated GI cable trays with tray cover of width 150 mm, 300 mm, 450 mm & 600 mm asper site requirement for laying of cables with standard rung spacings. Load for support span of 2.5 meter as 30, 60, 75 & 90 (in Kg /Mtr) respectively with concentric static load as 70 Kg at the centre, with materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge." |
| 6 | "Steel work (single section) for Cable Tray support: Supplying, fabricating and fixing M.S. structural steel work made of joists, tubes, pipes, channels, angles, plates, flats, bars etc ., for struts, chain link fencing posts as per drawing including gate, ladders, safety grills, walkways, collapsible gate, signboard s, supports for cable trench, making slots for barbed line, wire hoisting, placing in position, embedding in concrete, applying two coats of epoxy paint ""EPILUX 155"" High Build Enamel over a coat of EPILUX 610 Primer of M/s Berger or any other approved equivalen t make as per manufacturer’s recommendation, complete in all respect including cutting to required size welding of joints, fixing an chor plates,bolts, theading, nuts, washers, sleeves etc. and necessary lettering of approved pattern on main gate, signboards etc.co mplete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction s of the Engineer-in-Charge. (excluding the cost of concrete work)." |
| 7 | "Reinforcement for RCC Cable Tray Support: Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto pli nth level : Thermo-Mechanically Treated bars of grade Fe-500D or more" |
| 8 | "PCC for cable tray support: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1.5:3 [1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources]" |
| 9 | "RCC for cable tray support: Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishi ng and reinforcement - All work up to plinth level : 1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3graded stone aggregate 20 mm nominal size derived from natural sources]" |
| 10 | "Concrete Breaking for cable laying: Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per the directionsof Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obta ined. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations] : Nominal co ncrete 1:4:8 or reacher mix (including equivalent design mix)" |
| 11 | "Earth excavation for underground cable laying: Excavation in unpaved areas of earth in work sites for conventional cable trenches for a depth upto 1.5 metres including shoring, st rutting etc. (if necessary), backfilling the trench, job complete in all respects, including all labour and materials complete as pe r drawings, specification and directions of Site Engineer / Engineer-in-Charge" |
| 12 | "Earth excavation for cable tray support: Earth work in excavation in all kinds of soil, both wet & dry condition (except hard rock requiring blasting, chiselling / pneumaticdrilling) for foundation, substructures, trenches, sumps, pits etc. to the following depths including shoring, strutting, trimming of sides of the trenches, dressing, ramming and levelling the bottom of the trenches correct to level, grade etc. including bailing out of water (if any), stacking selected excavated earth for backfilling, filling available excavated earth in trenches, foundation,plinth etc. and/or disposing the excess earth outside IOCL premises to an unobjectionable area with all leads & lifts, etc. complet e in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of t he Site Engineer/EIC. All kind of soil except hard rock (Measured from original ground level)" |
| 13 | "Road cutting & Repairing for cable crossing: WBM Road/concrete breaking for cable trenches including required shoring strutting etc., and repairing of the road/dyke to original condition and disposing off excess materials (within the work site) job complete in all respects including the cost of labour, tools , materials, load, lift hire charges of equipments, if any, complete as per drawings, specification and directions of Site Engineer / Engineer-in-Charge." |
| 14 | "Sand filling in UG cable trench: Supplying and spreading of approved quality fine dry river sand in cable trenches including the cost of all material, transport, loa d and lift charges, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / En gineer-in-Charge" |
| 15 | "Brick soling in UG cable trench: Supply and laying of approved quality 75 mm thick second class brick flat soling with sand filling in the interstices, in cable tren ches for protectionincluding the cost of all brick and sand, labour, load and lift charges , tools and tackles etc , as per drawings , specification and directions of Site Engineer / Engineer-in-Charge." |
| 16 | "Cable Laying : (Power cables LT : OD above 20 mm and upto 40 mm) Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays,in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and installation of all re quired materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables,pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all labour, tools, consumable m aterials, etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer- in-Charge:" |
| 17 | "Cable marker for UG cable route: Supply, erection & installation of MS cable markers, including excavation, installation of the markers, cement concrete grouting, ba ckfilling, materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge. " |
| 18 | "GI Pipe for cable crossing: Supply, erection & installation of cable conduits made up of GI pipes of medium class "B" subject to owner"s approval in trenches (a lready made), on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends,sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as requiredJob complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of sit e engineer / Engineer-in-Charge: 100 mm" |
| 19 | "Cable Termination-Tagging from MCC Panel to HM JB: Providing end termination of power/control cable including cutting, stripping, providing & fixing lugs, cable insulation, providing & glanding double compression heavy duty FLAME PROOF TYPE brass cable gland conforming to IS-12943 (Dowell"s or approved equivalent) , wherever specified, providing aluminium lugs, crimping/soldering, as necessary, restoration of insulation/clamping of cable, taggi ng with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour and materials as per s tandard and direction of the Engineer-in- charge. 3.5C x 35 sqmm" |
| 20 | "GI Pipe Earthing Pit: Supplying, installation, testing of GI earthing electrode, including the supply and installation of the CI cover, charcoal /special backfill etc. and construction of chamber; complete as per drawings,specifications and directions of the Site Engineer, Including th e cost of all labour, tools, materials etc. complete in all respects." |
| 21 | "50 mm X 6 mm G.I. earthing strip: Supply, installing and testing of earthing strip/wire/rope/cable for completely making the earthing grid system by supplying, layingthe GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc ., complete as per drawings, specifications and directions of the Site engineer/Engineer-in-charge, including the cost of all labour , tools, materials, etc. complete in all respect: 50 mm X 6 mm G.I. earthing strip" |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
