|
| 1 | 4 Nos E Type QuartersRemoving grading concrete from roof slab including stacking the useful materials for reuse and removing the debris with in 50m lead including cost of all labour, Labour CESS and T&P. etc required to complete the work in all respect, as per direction of Engineer-in-charge. |
| 2 | P.C.C (1:2:4) inusing 12mm size black hard granite crusher broken granite chips of approved quality from approved quarryas per approved design including hoisting, lowering, laying and compacting to proper thickness, watering and curing for the required period,including cost of cantering & shuttering and finishing the exposed surface smooth providing grooves or beads where necessaryincluding cost, conveyance, royalty of all materials , cost of all labour, labour CESS T&P etc. required for complete the workin all respectas per the direction of the Engineer-in-Charge. |
| 3 | Providing and laying 4 cm thick Grading Concrete over roof slab with cement concrete (1:2:4) using 12mm size black hard granite crusher broken chips and screened & washed sharp river sand of approved quality from approved quarry and finished smooth, including watering and curing for the required period including cost, conveyance, royalties of all materials, cost of all labour, labour CESS, T&P etc. required to complete the work in all respect as per direction of the Engineer-in-Charge. |
| 4 | Removing old cement/lime plasterfrom walls including racking out joints 12mm deep and removing the debris with in 50m leadincluding cost of all labour, Labour CESS and T&P. etc required to complete the work in all respect, as per direction of Engineer-in-charge.Ground Floor |
| 5 | First Floor |
| 6 | Providing 6mm. thick cement plaster in cement mortar (1:4)to RCC surfaces finished smooth including closed deep chipping and slurry treatment using good quality screened and washed river sand, including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, labour CESS,T&P, and scaffolding as requiredto completethe workin all respectas per the Direction of the Engineer-in-charge .Ground Floor |
| 7 | First Floor |
| 8 | Providing 12 mm thick cement plaster with cement mortar (1:6) with screened and washed sharp river sand for mortar and finished smooth to the rough surface of walls after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, Labour CESS,T&P, and scaffolding as requiredto completethe workin all respectas per the Direction of the Engineer-in-charge .Ground Floor |
| 9 | First Floor |
| 10 | Providing 16 mm thick cement plaster with cement mortar (1:6) with screened and washed sharp river sand for mortar and finished smooth to the rough surface of walls after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, Labour CESS,T&P, and scaffolding as requiredto completethe workin all respectas per the Direction of the Engineer-in-charge .Ground Floor |
| 11 | First Floor |
| 12 | Providing and Finishing surfaces of walls & ceilingwith cement based wall putty [ water based ] of approved make and finished smooth and evensurface to receive paintingincluding cost of scaffolding ,staging and cost , conveyanceof all the materials ,including cost ofall labour, labour CESSandT&P requiredto completethe workin all respect as per specification anddirection of the Engineer-in-charge.Ground Floor |
| 13 | First Floor |
| 14 | Providing & painting exterior surfaces of walls with two coatsofWeather seal coat paint ofapproved quality and shade from a recognized companyto give an even shade, after cleaning the plastered surface perfectly by watering and brushing including cost of scaffolding ,stagingand cost ,conveyance of all materials ,all labour, labour CESSand T&P required to complete the work in all respectas per specification anddirection of the Engineer-in-charge.Ground Floor |
| 15 | First Floor |
| 16 | Finishing interior surfaces of walls with two coatsof Plastic emulsion paint ofapproved quality and shade from a recognized company to give an even shade including preparation of the surface before applying , includingcost of scaffolding ,stagingand cost ,conveyanceof all materials ,cost of all labour, labour CESSand T&P required to complete the workin all respectas per specification anddirection of the Engineer-in-charge.Ground Floor |
| 17 | First Floor |
| 18 | Scrapping old paints including all costs of labour etc. completethe workin all respectas per the Direction of the Engineer-in-charge.Ground Floor |
| 19 | First Floor |
| 20 | Providing two coats of enamel painting over a coat of priming onwood works including all costs of labour etc. completethe workin all respectas per the Direction of the Engineer-in-charge.Ground Floor |
| 21 | First Floor |
| 22 | Dismantling and removing old tile flooring including removing the base course including stacking the usuful materials for re-use and removing the debris with 50.00m lead including cost of all and complete finished in all respectto completethe workin all respectas per the Direction of the Engineer-in-chargeGround Floor |
| 23 | First Floor |
| 24 | Dismantling and removing old tiled cladding from walls including racking out the joints 12mm deep including stacking the usuful materials for reuse and removing the debris with 50.00m lead including cost of all and complete finished in all respect .Ground Floor |
| 25 | First Floor |
| 26 | Providing ,Supplying fitting and fixing of Polished Vitrified floor tiles of premium grade having thickness 8mm to 10mm confirming to IS 15622:2006 (Group-B la) of size600mm x 600mm, Plain Ivory, in floors and treads on steps and landing on 20mm thick bed of cement mortar 1:4(1 cement : 4 screened and washed river sand ) jointed with neat white cementmixed with pigment to match he shades of the tiles ,curing for required days , including cost of pre cast tiles , cost , conveyance , royalty of all materials,cost of all labour , labour CESS and T&P required to complete the workin all respect as per specification and direction of Engineer-in-charge.Ground Floor |
| 27 | First Floor |
| 28 | Providing ,Supplying fitting and fixing ofPolishedVitrifiedtiles of premium grade having thickness 8mm to 10mm confirming to IS 15622:2006 (Group-B la) of size 600mm x 600mm . Plain Ivory,in Dados skirting and rises of steps on 12mm thick cement plaster1:3 (1 cement :3 screened and washed river sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles , ,curing for required days , including cost of pre cast tiles , cost , conveyance , royaltyof all materials,cost of all labour , labour CESS and T&P required to complete the workin all respect as per specification and direction of Engineer-in-charge.Ground Floor |
| 29 | First Floor |
| 30 | Supplying of properly welded M.S gate s made of M.S. angles, flats and square bars as per approved drawing and design. Cost shall be including one coat of metallic primer and required hardware fixtures such as hinges, screws etc.including cost of all labour , materials , fabrication , conveyance etc complete as per direction of the Engineer in charge. |
| 31 | Dismantling and removing of doors and windows and ventilators including removal of frames , hinges ,fastening andstacking the same for reuse and removing the debris with in 50m lead including cost of all labour, Labour CESS and T&P. etc required to complete the work in all respect, as per direction of Engineer-in-charge. |
| 32 | Supplying fixing 32 mm thick Flush Door made out of 30 mm thick Block Board and pasing both side with 1 mm thick mica including cost of fittings and fixtures etc completethe workin all respectas per the Direction of the Engineer-in-charge. |
| 33 | Supplying fixing32 mm thick 2/3 rd panel 1/3rd glazedpiasal panel shuttersincluding cost of fittings and fixtures etc completethe workin all respectas per the Direction of the Engineer-in-charge. |
| 34 | Supplying fitting and fixing Fibre Reinforced Polymer FRP composite doorFrame with hinge as per approved section with glass fibre reinforced plastic moulded skins and a special sandwiched core, so as to impart monolithic composite structure as per approved technology (DST) to satisfy IS: 14856 door testing performance criteria including all completethe workin all respectas per the Direction of the Engineer-in-charge. |
| 35 | Factory made single leaf rigid FRP (alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) mpregnatedwith orthopthalicpolyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone (EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre\"s standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour as per specification and direction of the Engineer in charge. |
| 36 | Supplying, diluting & preparing chemical emulsion like imidaclosed 30.5% SC or other chemicals approved by central insecticides Board or as directed by manufacture and spraying the mixture uniformly by sprayer as Pre- Constructional Anti Termite Treatment confirming to IS 6313 (Part-II) and creating a chemical barrier under and around the column pits, wall treanches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding of pipes and conduits etc. at the rate of 7.5liters per sqm on vertical surface and 5.0liters per sqm on horizontal surface, 50% of the emulsion to be filled in the holes made in treanches at 150mm centre to centre (or as directed directed by the manufacture) including the cost of all material, cost of all labour, conveyance, loading, unloading, T&P, etc all complete as per the direction of Engineer-in-charge. (Approved rate for MPH building Sl no-1) |
| 37 | Providing fixing 100 mm dia PVC rain water spouts including all costs of labour etc. completethe workin all respectas per the Direction of the Engineer-in-charge. |
| 38 | Dismantling of AC Sheet Building and Construction of Paver Block PathDismantling of damaged AC Sheets from the roof and cleaningand stacking debries at GF etc completethe workin all respectas per the Direction of the Engineer-in-charge. |
| 39 | Dismantling and removal of damaged brick masonry workand cleaningand stacking debries at GF etc completethe workin all respectas per the Direction of the Engineer-in-charge. |
| 40 | Carriage of debris to outside by mechanical means within 5 km lead etc completethe workin all respectas per the Direction of the Engineer-in-charge. |
| 41 | Supplying and filling clean course river sand with watering compacting etc completethe workin all respectas per the Direction of the Engineer-in-charge. |
| 42 | Supplying, laying and compacting GSB Gr III with watering compacting etc completethe workin all respectas per the Direction of the Engineer-in-charge. |
| 43 | Providing and laying factory made 80mm thick cement concrete interlocking paver blocks of m-30 grade made by block making machine with strong vibratory compaction of approved size and shape laid over compacted bed of course sand layer including filling sand in the interstices / joints including cost of all materials , labour and T&P required for the work etc. complete in all respect s per direction of Engineer in charge.. |
| 44 | Providing laying pre cast kerb stone 600X300X150 mm of M30 grade concrete as per specification etc completethe workin all respectas per the Direction of the Engineer-in-charge. |
| 45 | E.I. WorksRecessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard) Group-A-L.P-30F.P6 C.B.P- |
| 46 | Group-B L.P-38F.P-28 C.B.P- |
| 47 | Supply and fixing of 3 pin 6Amp plugwith 6Amp switch on existing board (Modulartype ) |
| 48 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 49 | Supply and fixing of Modularmetal box on surface or in recess with suitable size of Modular coverin front including providing and fixing of 6pin 6Amp& 16Amp socket outlet and16Amp Modular switches connection(make-Anchor/ Legrand /Roma) |
| 50 | Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Finolex/L&T/Anchor/Havells/V-Guard)1 X 1.5sqmm |
| 51 | 2 X 2.5sq.mm +1 X 1.5sqmm |
| 52 | 2 X 4sq.mm +1 X 1.5sqmm. |
| 53 | Supply and fixing of following way single pole and neutral, sheet steel, MCB distribution board consumer unit, 240 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic covr for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( But with out MCB / RCCB / Isolator)12 WAY DOUBLE DOOR |
| 54 | Supply and fixing of 5Amp to 32A rating 240V \"B/C\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S)Single pole (SP) |
| 55 | Double pole (DP) |
| 56 | Supply and fixing Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required Standard earthingas per Govt. spcn. |
| 57 | Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required |
| 58 | Supply and fixing of different type of fitting with lamp20 watt LED T-5fitting( Make-Bajaj/ Philips /Crompton) |
| 59 | S/F of 09Watt LED Square/Round surface mountfitting (Make-Havells/Philips/C&S/Crompton) |
| 60 | Bulk head in die cast aluminium housing & frosted glass |
| 61 | Supply and fixing of fan (make-Usha/Orient/V-Guard/Khaitan/Havells/Crompton/Almonard)9\" Metal exhaust fan |
| 62 | S/F of 1200mm High speed Ceiling fan, Heavy Duty,durable, copper winding,Aluminium blade(ISI mark) Crompton /Khaitan /Orient /Polycab /Bajaj |
| 63 | Supply and fixing of Modularfan regulator, cll bell push, TV Socket Outlet(Cona/ Anchor/ Usha/Bajaj)Electronics step type Regulator (Modular type) |
| 64 | P.H. WorksSupplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipesconforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge.Ground Floor25mm dia PVC ASTM pipe (sch-80) |
| 65 | 32mm dia PVC ASTM pipe (sch-80) |
| 66 | 40mm dia PVC ASTM pipe (sch-80) |
| 67 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.250mmthick wall Ground Floor |
| 68 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing GI pipes / PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of theEngineer in charge. Ground Floor |
| 69 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge. (Fixtures make of Brass / G.M / C.P fittings are to be pre-approved by the E.I.C) 15mm dia CP bib cock (Plaza/Aquatic/Amber) |
| 70 | 15mm dia CP Long body bib cock (Plaza/Aquatic/Amber) |
| 71 | 15mm dia CP angle stop cock(Plaza/Aquatic/Amber) |
| 72 | 15mm dia CP long neck pillar cock(Plaza/Aquatic/Amber) |
| 73 | Two-way Bib cock(Plaza/Aquatic/Amber) |
| 74 | Health Faucet(Plaza/Aquatic/Amber) |
| 75 | Sink Cock (Plaza/Aquatic/Amber) |
| 76 | 15mm dia CP revolving shower with arm(Plaza deluxe make) |
| 77 | 25mm dia brass or gun metal fullway valve (Shakti Make) |
| 78 | 32mm dia brass or gun metal fullway valve (Shakti Make) |
| 79 | 40mm dia brass or gun metal fullway valve (Shakti Make) |
| 80 | 15mm dia CP Extension Piece |
| 81 | 15mm dia CP Flange |
| 82 | 125mm dia. CP grating |
| 83 | Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class Fly ash brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering,watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. Fixing 1000Ltr Roto-moulded water storage tank (Syntax Make) on the roof of Ground Floor |
| 84 | Supplying all materials, labour, T&P and fitting and fixing10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge10 litres capacity pvc low level cistern with 32mm dia CP long flush bendSlimline white(Hindware / Parryware Make) |
| 85 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricantby non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge In ground floor110mm dia U-PVC SWR pipe (Ashirbad /Sentinity/Supreeme) |
| 86 | 110mm U-PVC door tee |
| 87 | 110mm U-PVC Plain tee |
| 88 | 110mm U-PVC door bend |
| 89 | 110mm U-PVC plain bend |
| 90 | 110mm dia U-PVC \"P\" trap |
| 91 | 110mm dia U-PVC Plain Shoe Bend |
| 92 | 110mm dia U-PVC offset with out ear |
| 93 | 110mm dia U-PVC cowl |
| 94 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all completeas per PH specification and direction of the Engineer in charge.250mm to 375mmthick wall |
| 95 | Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge. |
| 96 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge. European water closet with ‘S’ trap plain (Parryware / Nycer make) |
| 97 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste,etc all complete as per specification and direction of the Engineer in charge. 550mmx440 mm size wash hand basin With porcelain pedestal(Parrywaremake) |
| 98 | Supplying all materials, labour, T&P and fixing wash kitchen sink with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge. 600x450x250 mm stainless steel kitchen sink-glossy-IS:13983 - 1994 (Jayna make) |
| 99 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete withCP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mmx600mm long CP towel rail |
| 100 | CP Towel ring |
| 101 | Supplying all materials ,labour ,T&P andfixing CP Soap Holder complete with CP brass bracketsfixed to wooden plugs with chromium plated brass screws etc.all complete as perspecification and direction of Engineer-in-charge. CP soap holder |
| 102 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to woden plugs with CP screws as per specification and direction of the Engineer in charge.600mmx125mm glass shelf with CP/NP guard rails |
| 103 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5m thick on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge. Mirror(Bevellededge) 600mmx450mm |
| 104 | Supplying fitting and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mmx19mm for stile & 15mmx15mm for top and bolt rails set with PVC door frame(Choukatha)of size 50mmx47mm is made out of 5cm thick sheet properly joined with solvent cement adhesive as per section view with MS square tube of 19mm of 19mm gauge to be inserted inside to give extra structural strength the price is inclusive of all cost of all materials labour,T&P etc.complete in all respect as per direction of the Engineer-in-charge. |
| 105 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasingincluding concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia U-PVC Alround Concrete |
| 106 | 160mm dia U-PVC Alround Concrete |
| 107 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge.Inside size 250mmx250mm |
| 108 | Supplying all materials, labour, T&P and constructing inspection chamber of the following sizewith cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class fly ashbrickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mmx760mmx460mm |
| 109 | ---- do --- addl depth of 0.15m upto 0.90m |
| 110 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.1.40m dia x 2.00m deep soakway pit |
| 111 | Supplying submerssible pump with sqirrel cage induction type submersible type submerssible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034 - 2002 with following specifications1H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm |
| 112 | DOL Control panel |
| 113 | 40mm dia steel short piece |
| 114 | 50mm size CI bracket |
| 115 | 2.50sqmm flat cable |
| 116 | 20mm dia rigid UPVC pipes |
| 117 | Labour charges for lowering including transportation |
