Road And Building Department-RBD has published Tender For Repair And Renovation Of 5 Nos F Type Quarters At Chc Gurandi In The District Of Gajapati (Civil, Electrical Installation And Ph).. Submission Date for this Tender is 10-06-2024. Electrical Maintenance Tenders in paralakhemundi Odisha. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 1a572793-aacd-43b9-90fa-9dd32ae0f5ac.html | Tender Notice | 0 KB |
| BOQ_500860.xls | Tender Document | 0 KB |
| DTCN5.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Tendernotice_2.pdf | Tender Document | 0 KB |
| Tendernotice_3.pdf | Tender Document | 0 KB |
| Tendernotice_4.pdf | Tender Document | 0 KB |
| Tendernotice_5.pdf | Tender Document | 0 KB |
| Tendernotice_6.pdf | Tender Document | 0 KB |
| Tendernotice_7.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | 2 Nos F type Quarter Removing old cement/lime plasterfrom walls including racking out joints 12mm deep and removing the debris with in 50m leadincluding cost of all labour, Labour CESS and T&P. etc required to complete the work in all respect, as per direction of Engineer-in-charge. |
| 2 | Providing fitting and fixing of false ceiling with aluminum anodized T section No.3215 with 2"-0"" center to center , L section No 1705 up to 15 microne in 4 walls to be fixed by means of steel screews and PVCplug and the aluminum grid 2"-0"" x2"-0"" with prelaminated particle board suspended from ceiling etc.as per deirection of the Engineer in charge |
| 3 | Providing 12 mm thick cement plaster with cement mortar (1:6) with screened and washed sharp river sand for mortar and finished smooth to the rough surface of walls after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, Labour CESS,T&P, and scaffolding as requiredto completethe workin all respectas per the Direction of the Engineer-in-charge . |
| 4 | Providing 16 mm thick cement plaster with cement mortar (1:6) with screened and washed sharp river sand for mortar and finished smooth to the rough surface of walls after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, Labour CESS,T&P, and scaffolding as requiredto completethe workin all respectas per the Direction of the Engineer-in-charge . |
| 5 | Dismantling and removing old tile flooring including removing the base course including stacking the usuful materials for re-use and removing the debris with 50.00m lead including cost of all and complete finished in all respectcompletethe workin all respectas per the Direction of the Engineer-in-charge . |
| 6 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. completeincluding the cost of all materials, hardware fittings, cost of all labour, conveyance, loading, unloading, T&P, etc, complete as per the direction of engineer-in-charge. |
| 7 | Supply & Fixing 32 mm thickpanel windowshutter with 2/3rd panel and 1/3rd glazed with all cost & material inwindowetc. completeincluding the cost of all materials, hardware fittings, cost of all labour, conveyance, loading, unloading, T&P, etc, complete as per the direction of engineer-in-charge. |
| 8 | Supplying, fitting and fixing Colour vitrified tile 60x60cm8 to 10 mm thick in floorsof approved makeconfirming to IS : 13755 with application oSupplying, fitting and fixing vitrified tile 60x60cm colour printed 8 to 10 mm thick in floorsof approved makeconfirming to IS : 13755 over 20 mm thick CM 1:4and filling joints with white cement of approved quality including cost of all materials, takes labour T&P etc required for the work. |
| 9 | Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make (JK White/ Birla white or equivalent make duly approved by Engineer-in-Charge) and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. |
| 10 | Wall painting 2coats with weather coat of approved shade on outer wall surface over a coat of cement primerto give an even shade including cost of brushes and putty including cost of paint scrapping, cleaning rubbing, scaffolding including all costs of labour etc. complete as per direction of E.I.C. |
| 11 | Painting two coat with Plastic Emulsion Paint over a coat of primer to make in even finished surfaces in all floors and heights to wall surface o approved make and shade including cost, conveyance, royalties , cost of all labour, labour cess, T&P etc. required for the work complete as directed by the Engineer-in-Charge. |
| 12 | Painting two coat with approved synthetic enamel paint to new wood & iron work over a coat of Red oxide primer including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. (Make-Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-charge).. |
| 13 | Supplying, fitting and fixing Glazed vitrified tile 60x60cm8 to 10 mm thick in Dados of approved makeconfirming to IS : 13755 with application oSupplying, fitting and fixing vitrified tile 60x60cm colour printed 8 to 10 mm thick in floorsof approved makeconfirming to IS : 13755over 12 mm thick CM 1:3 and filling joints with white cement of approved quality including cost of all materials, takes labour T&P etc required for the work. equivalent make duly approved by Engineer-in-charge).. |
| 14 | Supplying fitting and fixing Fibre Reinforced Polymer FRP composite doorFrame with hinge as per approved section with glass fibre reinforced plastic moulded skins and a special sandwiched core, so as to impart monolithic composite structure as per approved technology (DST) to satisfy IS: 14856 door testing performance criteria including all complete, make duly approved by Engineer-in-charge).. |
| 15 | Supplying fitting and fixing Fibre Reinforced Polymer FRP composite door shutteras per approved section with glass fibre reinforced plastic moulded skins and a special sandwiched core, so as to impart monolithic composite structure as per approved technology (DST) to satisfy IS: 14856 door testing performance criteria including all complete, make duly approved by Engineer-in-charge. |
| 16 | Supplying, diluting & preparing chemical emulsion like imidaclosed 30.5% SC or other chemicals approved by central insecticides Board or as directed by manufacture and spraying the mixture uniformly by sprayer as Pre- Constructional Anti Termite Treatment confirming to IS 6313 (Part-II) and creating a chemical barrier under and around the column pits, wall treanches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding of pipes and conduits etc. at the rate of 7.5liters per sqm on vertical surface and 5.0liters per sqm on horizontal surface, 50% of the emulsion to be filled in the holes made in treanches at 150mm centre to centre (or as directed directed by the manufacture) including the cost of all material, cost of all labour, conveyance, loading, unloading, T&P, etc all complete as per the direction of Engineer-in-charge. (Approved rate for MPH building Sl no-1) |
| 17 | Supplying, fitting & fixing of Chequered Tiles of in in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge. |
| 18 | 2 Nos F type Quarter (AC Sheet) Dismantling 2.50 cms thick A.S.Flooring height including stacking the usuful materials for re-use and removing the debris with 50.00m lead including cost ofall and complete finished in all respect .etc. required for the work all complete as per direction of the Engineer-in-charge. |
| 19 | Supplyng and fitting ,fixing,A.C sheet,Ridges with J&L hooks with nuts& washers etc. required for the work all complete as per direction of the Engineer-in-charge. |
| 20 | Supplying fixingof wooden members such as Purlines,Rafters etc complete. etc. required for the work all complete as per direction of the Engineer-in-charge. |
| 21 | Removing old cement/lime plasterfrom walls including racking out joints 12mm deep and removing the debris with in 50m leadincluding cost of all labour, Labour CESS and T&P. etc required to complete the work in all respect, as per direction of Engineer-in-charge. |
| 22 | Providing fitting and fixing of false ceiling with aluminum anodized T section No.3215 with 2"-0"" center to center , L section No 1705 up to 15 microne in 4 walls to be fixed by means of steel screews and PVCplug and the aluminum grid 2"-0"" x2"-0"" with prelaminated particle board suspended from ceiling etc.as per deirection of the Engineer in charge |
| 23 | Providing 12 mm thick cement plaster with cement mortar (1:6) with screened and washed sharp river sand for mortar and finished smooth to the rough surface of walls after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, Labour CESS,T&P, and scaffolding as requiredto completethe workin all respectas per the Direction of the Engineer-in-charge . |
| 24 | Providing 16 mm thick cement plaster with cement mortar (1:6) with screened and washed sharp river sand for mortar and finished smooth to the rough surface of walls after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, Labour CESS,T&P, and scaffolding as requiredto completethe workin all respectas per the Direction of the Engineer-in-charge . |
| 25 | Dismantling and removing old tile flooring including removing the base course including stacking the usuful materials for re-use and removing the debris with 50.00m lead including cost of all and complete finished in all respectto completethe workin all respectas per the Direction of the Engineer-in-charge . |
| 26 | Supplying fitting and fixing Fibre Reinforced Polymer FRP composite doorFrame with hinge as per approved section with glass fibre reinforced plastic moulded skins and a special sandwiched core, so as to impart monolithic composite structure as per approved technology (DST) to satisfy IS: 14856 door testing performance criteria including all complete, to completethe workin all respectas per the Direction of the Engineer-in-charge . |
| 27 | Supplying fitting and fixing Fibre Reinforced Polymer FRP composite door shutteras per approved section with glass fibre reinforced plastic moulded skins and a special sandwiched core, so as to impart monolithic composite structure as per approved technology (DST) to satisfy IS: 14856 door testing performance criteria including all complete, to completethe workin all respectas per the Direction of the Engineer-in-charge . |
| 28 | Supplying, fitting and fixing Glazed vitrified tile 60x60cm8 to 10 mm thick in floorsof approved makeconfirming to IS : 13755 with application oSupplying, fitting and fixing vitrified tile 60x60cm colour printed 8 to 10 mm thick in floorsof approved makeconfirming to IS : 13755 over 20 mm thick CM 1:4and filling joints with white cement of approved quality including cost of all materials, takes labour T&P etc required for the work.to completethe workin all respectas per the Direction of the Engineer-in-charge . |
| 29 | Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make (JK White/ Birla white or equivalent make duly approved by Engineer-in-Charge) and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. |
| 30 | Wall painting 2coats with weather coat of approved shade on outer wall surface over a coat of cement primerto give an even shade including cost of brushes and putty including cost of paint scrapping, cleaning rubbing, scaffolding including all costs of labour etc. complete as per direction of E.I.C. |
| 31 | Painting two coat with Plastic Emulsion Paint over a coat of primer to make in even finished surfaces in all floors and heights to wall surface o approved make and shade including cost, conveyance, royalties , cost of all labour, labour cess, T&P etc. required for the work complete as directed by the Engineer-in-Charge. |
| 32 | Painting two coat with approved synthetic enamel paint to new wood & iron work over a coat of Red oxide primer including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. (Make-Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-charge).. |
| 33 | Supplying, diluting & preparing chemical emulsion like imidaclosed 30.5% SC or other chemicals approved by central insecticides Board or as directed by manufacture and spraying the mixture uniformly by sprayer as Pre- Constructional Anti Termite Treatment confirming to IS 6313 (Part-II) and creating a chemical barrier under and around the column pits, wall treanches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding of pipes and conduits etc. at the rate of 7.5liters per sqm on vertical surface and 5.0liters per sqm on horizontal surface, 50% of the emulsion to be filled in the holes made in treanches at 150mm centre to centre (or as directed directed by the manufacture) including the cost of all material, cost of all labour, conveyance, loading, unloading, T&P, etc all complete as per the direction of Engineer-in-charge. (Approved rate for MPH building Sl no-1) |
| 34 | Supplying, fitting & fixing of Chequered Tiles of in in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge. |
| 35 | 2 Nos Doctors Quarters Dismantling 2.50 cm thick grading concrete from roof slabincluding cleaning the roof surface and lowering andremoving the debris with 50.00m lead including cost ofall and complete finished in all respectmake duly approved by Engineer-in-charge).. |
| 36 | Providing 4.00 cm thick grading concrete(1:2:4) using 12 mm and down grade size HG Chips on new works including all cost of all and complete finished.including cost, conveyance, royalty of all materials with labour, labour CESS , and T&P etc. required to complete the workin all respect including dewatering if required as per direction of the Engineer-in-Charge. |
| 37 | Removing old cement/lime plasterfrom walls including racking out joints 12mm deep and removing the debris with in 50m leadincluding cost of all labour, Labour CESS and T&P. etc required to complete the work in all respect, as per direction of Engineer-in-charge. |
| 38 | Providing 6mm. thick cement plaster in cement mortar (1:4)to RCC surfaces finished smooth including closed deep chipping and slurry treatment using good quality screened and washed river sand, including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, labour CESS,T&P, and scaffolding as requiredto completethe workin all respectas per the Direction of the Engineer-in-charge . |
| 39 | Providing 12 mm thick cement plaster with cement mortar (1:6) with screened and washed sharp river sand for mortar and finished smooth to the rough surface of walls after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, Labour CESS,T&P, and scaffolding as requiredto completethe workin all respectas per the Direction of the Engineer-in-charge . |
| 40 | Providing 16 mm thick cement plaster with cement mortar (1:6) with screened and washed sharp river sand for mortar and finished smooth to the rough surface of walls after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, Labour CESS,T&P, and scaffolding as requiredto completethe workin all respectas per the Direction of the Engineer-in-charge . |
| 41 | Supplying of properly welded M.S gate and M.S. grills to windows made of M.S. angles, flats and square bars as per approved drawing and design. Cost shall be including one coat of metallic primer and required hardware fixtures such as hinges, screws etc.including cost of all labour , materials , fabrication , conveyance etc complete as per direction of the Engineer in charge. |
| 42 | Dismantling and removing old tile flooring including removing the base course including stacking the usuful materials for re-use and removing the debris with 50.00m lead including cost of all and complete finished in all respect . |
| 43 | Dismantling and removing old tiled cladding from walls including racking out the joints 12mm deep including stacking the usuful materials for reuse and removing the debris with 50.00m lead including cost of all and complete finished in all respect . |
| 44 | Supplying, fitting and fixing Colour vitrified tile 60x60cm8 to 10 mm thick in floorsof approved makeconfirming to IS : 13755 with application oSupplying, fitting and fixing vitrified tile 60x60cm colour printed 8 to 10 mm thick in floorsof approved makeconfirming to IS : 13755 over 20 mm thick CM 1:4and filling joints with white cement of approved quality including cost of all materials, takes labour T&P etc required for the work. |
| 45 | Supplying, fitting and fixing Colour vitrified tile 60x60cm8 to 10 mm thick in Dados of approved makeconfirming to IS : 13755 with application oSupplying, fitting and fixing vitrified tile 60x60cm colour printed 8 to 10 mm thick in floorsof approved makeconfirming to IS : 13755over 12 mm thick CM 1:3 and filling joints with white cement of approved quality including cost of all materials, takes labour T&P etc required for the work. |
| 46 | Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make (JK White/ Birla white or equivalent make duly approved by Engineer-in-Charge) and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. |
| 47 | Wall painting 2coats with weather coat of approved shade on outer wall surface over a coat of cement primerto give an even shade including cost of brushes and putty including cost of paint scrapping, cleaning rubbing, scaffolding including all costs of labour etc. complete as per direction of E.I.C. |
| 48 | Painting two coat with Plastic Emulsion Paint over a coat of primer to make in even finished surfaces in all floors and heights to wall surface o approved make and shade including cost, conveyance, royalties , cost of all labour, labour cess, T&P etc. required for the work complete as directed by the Engineer-in-Charge. |
| 49 | Painting two coat with approved synthetic enamel paint to new wood & iron work over a coat of Red oxide primer including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. (Make-Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-charge).. |
| 50 | Supplying fitting and fixing Fibre Reinforced Polymer FRP composite doorFrame with hinge as per approved section with glass fibre reinforced plastic moulded skins and a special sandwiched core, so as to impart monolithic composite structure as per approved technology (DST) to satisfy IS: 14856 door testing performance criteria including all complete, as approved by EIC. |
| 51 | Supplying fitting and fixing Fibre Reinforced Polymer FRP composite door shutteras per approved section with glass fibre reinforced plastic moulded skins and a special sandwiched core, so as to impart monolithic composite structure as per approved technology (DST) to satisfy IS: 14856 door testing performance criteria including all complete, as approved by EIC. |
| 52 | Supply & Fixing 32 mm thick Flush Door shutter with 30 mm thick BWR Block Board and pasting both side 1 mm mica with all cost & material in doors& window etc all complete as per the direction of Engineer-in-charge. |
| 53 | Supply & Fixing 32 mm thickpanel windowshutter with 2/3rd panel and 1/3rd glazed with all cost & material inwindowetc all complete as per the direction of Engineer-in-charge. |
| 54 | Supplying, diluting & preparing chemical emulsion like imidaclosed 30.5% SC or other chemicals approved by central insecticides Board or as directed by manufacture and spraying the mixture uniformly by sprayer as Pre- Constructional Anti Termite Treatment confirming to IS 6313 (Part-II) and creating a chemical barrier under and around the column pits, wall treanches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding of pipes and conduits etc. at the rate of 7.5liters per sqm on vertical surface and 5.0liters per sqm on horizontal surface, 50% of the emulsion to be filled in the holes made in treanches at 150mm centre to centre (or as directed directed by the manufacture) including the cost of all material, cost of all labour, conveyance, loading, unloading, T&P, etc all complete as per the direction of Engineer-in-charge. (Approved rate for MPH building Sl no-1) |
| 55 | E.I. Works Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard) Group-A-L.P- F.P- C.B.P- |
| 56 | Group-B L.P- F.P- C.B.P- |
| 57 | Group-C L.P- F.P- C.B.P- |
| 58 | Supply and fixing of 3 pin 6Amp plugwith 6Amp switch on existing board (Modulartype ) |
| 59 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 60 | Supply and fixing of Modularmetal box on surface or in recess with suitable size of Modular coverin front including providing and fixing of 6pin 6Amp& 16Amp socket outlet and16Amp Modular switches connection(make-Anchor/ Legrand /Roma) |
| 61 | Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Finolex/L&T/Anchor/Havells/V-Guard) 1 X 1.5sqmm |
| 62 | 2 X 2.5sq.mm +1 X 1.5sqmm |
| 63 | 2 X 4sq.mm +1 X 1.5sqmm. |
| 64 | Supply and fixing of following way single pole and neutral, sheet steel, MCB distribution board consumer unit, 240 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic covr for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( But with out MCB / RCCB / Isolator) 12 WAY DOUBLE DOOR |
| 65 | Supply and fixing of 5Amp to 32A rating 240V "B/C" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S) Single pole (SP) |
| 66 | Double pole (DP) |
| 67 | Supply and fixing Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required Standard earthingas per Govt. spcn. |
| 68 | Supply and fixing of different type of fitting with lamp 20 watt LED T-5fitting( Make-Bajaj/ Philips /Crompton) |
| 69 | Supply and fixing of fan (make-Usha/Orient/V-Guard/Khaitan/Havells/Crompton/Almonard) 9" Metal exhaust fan |
| 70 | S/F of 1200mm High speed Ceiling fan, Heavy Duty,durable, copper winding,Aluminium blade(ISI mark) Crompton /Khaitan /Orient /Polycab /Bajaj |
| 71 | Supply and fixing of Modularfan regulator, cll bell push, TV Socket Outlet(Cona/ Anchor/ Usha/Bajaj) Electronics step type Regulator (Modular type) |
| 72 | P.H. Works Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipesconforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge. Ground Floor25mm dia PVC ASTM pipe (sch-80) |
| 73 | 32mm dia PVC ASTM pipe (sch-80) |
| 74 | 40mm dia PVC ASTM pipe (sch-80) |
| 75 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. 250mmthick wall Ground Floor |
| 76 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing GI pipes / PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of theEngineer in charge. Ground Floor |
| 77 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge. (Fixtures make of Brass / G.M / C.P fittings are to be pre-approved by the E.I.C) 15mm dia CP bib cock (Plaza/Aquatic/Amber) |
| 78 | 15mm dia CP Long body bib cock (Plaza/Aquatic/Amber) |
| 79 | 15mm dia CP angle stop cock(Plaza/Aquatic/Amber) |
| 80 | 15mm dia CP long neck pillar cock(Plaza/Aquatic/Amber) |
| 81 | Two-way Bib cock(Plaza/Aquatic/Amber) |
| 82 | Health Faucet(Plaza/Aquatic/Amber) |
| 83 | Sink Cock (Plaza/Aquatic/Amber) |
| 84 | 15mm dia CP revolving shower with arm(Plaza deluxe make) |
| 85 | 25mm dia brass or gun metal fullway valve (Shakti Make) |
| 86 | 32mm dia brass or gun metal fullway valve (Shakti Make) |
| 87 | 40mm dia brass or gun metal fullway valve (Shakti Make) |
| 88 | 15mm dia CP Extension Piece |
| 89 | 15mm dia CP Flange |
| 90 | 125mm dia. CP grating |
| 91 | Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class Fly ash brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering,watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. Fixing 1000Ltr Roto-moulded water storage tank (Syntax Make) on the roof of Ground Floor |
| 92 | Supplying all materials, labour, T&P and fitting and fixing10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge 10 litres capacity pvc low level cistern with 32mm dia CP long flush bendSlimline white(Hindware / Parryware Make) |
| 93 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricantby non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge In ground floor110mm dia U-PVC SWR pipe (Ashirbad /Sentinity/Supreeme) |
| 94 | 110mm U-PVC door tee |
| 95 | 110mm U-PVC Plain tee |
| 96 | 110mm U-PVC door bend |
| 97 | 110mm U-PVC plain bend |
| 98 | 110mm dia U-PVC "P" trap |
| 99 | 110mm dia U-PVC Plain Shoe Bend |
| 100 | 110mm dia U-PVC offset with out ear |
| 101 | 110mm dia U-PVC cowl |
| 102 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all completeas per PH specification and direction of the Engineer in charge.250mm to 375mmthick wall |
| 103 | Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge. |
| 104 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge. European water closet with ‘S’ trap plain (Parryware / Nycer make) |
| 105 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste,etc all complete as per specification and direction of the Engineer in charge. 550mmx440 mm size wash hand basin With porcelain pedestal(Parrywaremake) |
| 106 | Supplying all materials, labour, T&P and fixing wash kitchen sink with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge. 600x450x250 mm stainless steel kitchen sink-glossy-IS:13983 - 1994 (Jayna make) |
| 107 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete withCP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mmx600mm long CP towel rail |
| 108 | CP Towel ring |
| 109 | Supplying all materials ,labour ,T&P andfixing CP Soap Holder complete with CP brass bracketsfixed to wooden plugs with chromium plated brass screws etc.all complete as perspecification and direction of Engineer-in-charge. CP soap holder |
| 110 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to woden plugs with CP screws as per specification and direction of the Engineer in charge.600mmx125mm glass shelf with CP/NP guard rails |
| 111 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5m thick on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge. Mirror(Bevellededge) 600mmx450mm |
| 112 | Supplying fitting and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mmx19mm for stile & 15mmx15mm for top and bolt rails set with PVC door frame(Choukatha)of size 50mmx47mm is made out of 5cm thick sheet properly joined with solvent cement adhesive as per section view with MS square tube of 19mm of 19mm gauge to be inserted inside to give extra structural strength the price is inclusive of all cost of all materials labour,T&P etc.complete in all respect as per direction of the Engineer-in-charge. |
| 113 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasingincluding concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia U-PVC Alround Concrete |
| 114 | 160mm dia U-PVC Alround Concrete |
| 115 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge. Inside size 250mmx250mm |
| 116 | Supplying all materials, labour, T&P and constructing inspection chamber of the following sizewith cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class fly ashbrickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mmx760mmx460mm |
| 117 | ---- do --- addl depth of 0.15m upto 0.90m |
| 118 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. 1.40m dia x 2.00m deep soakway pit |
| 119 | Supplying submerssible pump with sqirrel cage induction type submersible type submerssible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034 - 2002 with following specifications 1H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm |
| 120 | DOL Control panel |
| 121 | 40mm dia steel short piece |
| 122 | 50mm size CI bracket |
| 123 | 2.50sqmm flat cable |
| 124 | 20mm dia rigid UPVC pipes |
| 125 | Labour charges for lowering including transportation |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
