Military Engineer Services-MES has published Tender For Comprehensive Maintenance Work In Zone C Maru Vihar At Af Station Suratgarh. Submission Date for this Tender is 02-05-2024. Civil Work Tenders in suratgarh Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-05-2024 |
| Sl. No. | Item Description |
| 1 | BOQ (COMPREHENSIVE MAINT WORK IN ZONE ‘C’ MARU VIHAR AT AF STN SURATGARH.) |
| 2 | Demolition of brick workbuilt in cement mortar includingall quoins, arches , pillars etc but excluding precast concrete articles, complete all as specified and directed by the Engineer-in-Charge. |
| 3 | M&L for brick work with sub class "B" bricks, straight or curved on planexc 6 m mean radius built in cement mortar 1:6, complete all as specified anddirected by Engineer-in-Charge. |
| 4 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing ),and removing rubbish off the premises , complete all as specified and directed by Engineer-in-Charge |
| 5 | M&L for First qualityglazed ceramic colouredtiles of(450mmx350mm) x 7mm thick, laid on vertical surfaces of wall such as skirting, dados and risers to steps etc laid over and including10mm thick cement plaster in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shadeof tiles ,complete all as specified and directed by the Engineer in Charge. |
| 6 | M&L for coloured non skid joint free glazed ceramic tiles300mmx300mmx7mm thick as per IS 13712 Garde II(a) in floor etc set jointed and pointed in white or coloured cement to match as in floors over and including 10mm thick screed bed in CM (1:6), complete all as specified and directed by the Engineer in Charge. |
| 7 | M&L for First quality, Non skid ceramic coloured tiles, 7mm to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed by the Engineer in charge. |
| 8 | M&L for First quality, Non skid ceramic coloured tiles, 7mm to 8mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shadeof tiles, complete all as specified and directed by the Engineer in Charge. |
| 9 | M&L for First quality, non skid ceramic coloured tiles, 7mm to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but not exc 0.36 sqm, laid in floors with neat cement slurry @ 3.00 kg/sqm over and including 15mm thick screed bed of CM (1:6) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed by the Engineer in charge |
| 10 | M&L for First quality, non skid ceramic coloured tiles, 7mm to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but not exc 0.36 sqm, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste ofhoney like consistancy and pointed in white or coloured cement to match the shadeof tiles , complete all as specified and directed by the Engineer in Charge |
| 11 | M&L for 15mm-18mm thick Granite stone slab machine cut in cooking platform laid over 10mm thick screed bed in CM (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone including polishing,complete all as specified and directed |
| 12 | Taking down cement plaster on brick walls & concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified and directed. |
| 13 | M&L for rendering 10mm thick cement plaster in CM (1:6) on fair faces of brick works or concrete surfaces , finished even and smoothwithout using extra cement, complete all as specified and directed. |
| 14 | M&L for rendering 5mm thick on RCC ceiling surfaces in CM 1:3 and finished even and smooth without using extra cement , complete all as specified anddirected. |
| 15 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces inCM 1:4, finished even and smooth without using extra cement, complete all as specified anddirected. |
| 16 | M&L for preparation of new plastered wall surfaces and applying two coats of exterior acrylic emulsion paint(in camouflage pattern using number of colours), complete all as specified and directed by the Engineer-in-Charge. |
| 17 | M&L for Preparation of new plastered or un plastered wall surfaces of any description and applying two coats of oil bound distemper over a coat of Chalk whitening , complete all as specified and directed by the Engineer-in-Charge |
| 18 | M&L for Preparation of new surfaces of wall including brooming down or steel wire brushing; scrapping downsmoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying three coats of white wash, complete all as specified and directed byEngineer -in-Charge. |
| 19 | M&L for Preparation of new surfaces of ceiling,chajja etc, including brooming down or steel wire brushing; scrapping downsmoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying three coats of white wash, complete all as specified and directed by Engineer -in-Charge. |
| 20 | M&L for preparation over old surfaces and applying two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns, complete all as specified and directed by Engineer-in-Charge. |
| 21 | M&L for complete removal through mechanical scraper machine of existing any type oftreatment of wall andapplying two coats of JK Birla wall care putty and rubbing of wall through sand paperto receive smooth finishes and applying two coats oil bound distemper with painting roller,complete all as specified and directed by Engr-in-Charge. |
| 22 | Taking up or down 15mm bore steel tubing with connections or fittings from wall, ceiling and floor etc, including cutting/chasing in wall/floor and removal from site, complete all as specified and directed. |
| 23 | Taking up or down 20mm bore steel tubing with connections or fittings from wall, ceiling and floor etc, including cutting/chasing in wall/floor and removal from site, complete all as specified and directed. |
| 24 | S&F Steel water tubes, 15mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. |
| 25 | S&F Steel water tubes, 20mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. |
| 26 | Re-fixing steel water tubing of 15mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified and directed. |
| 27 | Re-fixing steel water tubing of 20mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified and directed. |
| 28 | Cutting chases pinning in making good to facing where required and pointing in CM (1:3) for concealed water tubing etc as in brick walls exc 10cm but not exc 20cm girth, complete all as specified anddirected. |
| 29 | S&F in repair Stop valve/Angle valve 15mm dia cast copper alloy, chromium plated fancy type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified anddirected. |
| 30 | S&F in repair Pillar taps, 15mm borecast copper alloy chromium plated , with capstan heads, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified anddirected. |
| 31 | S&F in repair long body bib taps,15mm cast copper alloy,chromium plated ,fancy type ,screwed down , screwed for iron pipe , complete all as specified anddirected. |
| 32 | S&F in repair chromium plated brass shower rose 125mm bore of rim with swivel joint, complete all as specified anddirected. |
| 33 | S&F in repair wash basins, vitreous china, white, flat back of size 550mmx400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets, complete all as specified anddirected. |
| 34 | S&F in repairvitreous china squatting pan Orissa pattern size 580mmx440mm white with integral footrest (exclusive flusing cistern & flush pipe) including cast iron "P" or "S" trap of 100mm bore pipe fixed in PCC 1:2:4 type B-2and necessary lime concrete, fixed as in repairs, including making good the surface to match with existing floor finish, complete all as specified anddirected. |
| 35 | S&F in repair vitreous China wash down water closet pan (Padestal Pattern) white including plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or alluminium hinging device(excluding flushing cistern) etc, complete all as specified anddirected. |
| 36 | S&F PVC valveless, syphonic action type flushing cisterns 10 ltrs capacity, low level, white, with inlet ball valves, float and handle including brackets and pvc flush pipe 32mm dia for low level fixed in repair, complete all as specified anddirected. |
| 37 | S&F in repair PVC connection of PTM, non corrosive with nuts and washers on both ends, 600mmlong, complete all as specified anddirected. |
| 38 | Taking down Chowkhats with shutters (without taking off shutter from the frame) of any description not exc1.50 sqm each, and making good the disturbed Surface in CM1:4 &finish the surface as exists, complete all as specified anddirected. |
| 39 | S&F Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted as per specification & drawing and as per manufacturer"s instructions, complete all as specified anddirected. |
| 40 | S&F factory made solid PVC moulded door shutter, 28mm to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face,in frame at site, complete all as specified anddirected. |
| 41 | Taking down shutters of any description exc 1.50 sqm but not exc 4.00 sqm each, and making good the disturbed surface in CM1:4 & finished the surface as exists, complete all as specified anddirected. |
| 42 | S&F 35mm thick 2nd class hardwood (Hollock) skeleton shutters, open rebated and prepared to receive wire cloth, glass etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire cloth etc., sizes of members of shutters, complete all as specified anddirected. |
| 43 | Taking down shutters of any description exc 1 sqm but not exc 2 sqm each, from chowkhat, complete all as specified anddirected. |
| 44 | S&F of 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type back side and one face is covered with decorative face veneer with lipping/frame to match, fitted to chowkats, complete all as specified anddirected. |
| 45 | Dismantling structural steel work in including doors, window, gates ,angles but excluding framed truss etc, complete all as specified anddirected. |
| 46 | S&F of mild steel framed work such as in doors/chowkhats or gates of angle or other section with gusset plates, rail, braces etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening & fixing and similar work conforming to Fe-290 grade E-165 , complete all as specified anddirected. |
| 47 | Taking down Windowof any descriptioncomplete all as specified anddirected. |
| 48 | Taking down Ventilatorof any descriptioncomplete all as specified and directed by the Engineer in Charge. |
| 49 | M&L for factory made steel windows box type using ERW hollow "P" section comprising double frame for glazed and gauged skelton shutters jointed interally with flat iron 40mmx4mm complete including grill of 10mm square bar, fixed horizontally @ 10cm centre to centre hinges, handle, tower bolts, lugs etc with provisioncomplete as all specified and directed. Note:- (i) For the purpose of measurement and payment double shutter with frame shall be consider as one unit. (ii) Glazing and wire mesh shall be measured and paid for separatley in respective of item. |
| 50 | M&L for factory made steel windows box type using ERW hollow "P" section comprising double frame for glazed and gauged skeleton shutters jointed interally with flat iron 40mmx4mm complete including grill of 10mm square bar, fixed horizontally @ 10cm centre to centre hinges, handle, tower bolts, lugs etc with/without Cooler Provisioncomplete as all specified and directed. Note:- (i) For the purpose of measurement and payment double shutter with frame shall be consider as one unit. (ii) Glazing and wire mesh shall be measured and paid for separatley in respective item |
| 51 | M&L for factory made box type steel section ventilators, fixed type with glazing bars @ 10mm square bar @ 10cm c/c and with one shop coat of zinc chromate primer, complete all as specified and directed. |
| 52 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling our glazing pins / spring clipsproviding and fixing new one , complete all as specified anddirected. |
| 53 | S&F for sheet glass 3mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 sqm in each pane, complete all as specified anddirected. |
| 54 | S&F for figured sheet glass 3mm thick, pin head type and glazing with oil putty (in metal frames etc) in squares not exc 0.5 sqm in each pane, complete all as specified anddirected.. |
| 55 | S&F for aluminium handles ,plate cast type anodised of 150 mm size, complete all as specified anddirected. |
| 56 | S&F for aluminum anodizes barrel tower bolts of extruded section and fixed of 200mm size, complete all as specified anddirected. |
| 57 | S&Ffor butt hinges medium weight cold rolled mild steel of 100mm size and fixed, complete all as specified anddirected. |
| 58 | S&F for aluminum alloy, anodized, door bolt with hasp staple ( bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed length of bolt 250mm, bolts not less than 16mm dia with and including a minimum of 6 bolts not,four on bolt plate and two on staple plate complete (ISI marked ), complete all as specified anddirected. |
| 59 | S&F for galvanised mild steel wire cloth, 0.56mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks, or galvanised wire staples, complete all as specified anddirected. |
| 60 | M&L for preparing new or previously untreated steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified anddirected. |
| 61 | M&L for preparation of new wooden surfaces of any description, exc 10cm width or girth of any description and applying two coats of synthetic enamel paint over one coat of pink primer , complete all as specified anddirected. |
| 62 | S&F in repair Bib tap standard of PTMT 15mm bore dia of any colour high pressure screwed for iron pipe and fixed as in repair (minimum weight 90gms), complete all as specified anddirected. |
| 63 | S&F in repair Ball valve of 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms), complete all as specified anddirected. |
| 64 | S&F for stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen or with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32mm fixed as in repairand making good to disturbed surfaces, complete all as specified anddirected. |
| 65 | Dismantling existing water storage tanks exc 250 litres but not.exc 500 litres capacity by disconnecting existing water connection and removal from site , complete all as specified anddirected. |
| 66 | S&F for rotational moulded polyethylene PVC, white colour, tripple layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. but excluding ball valve , complete all as specified and directed. |
| 67 | S&F for fancy type stainless steel 20-22 mm dia drapery rod withall fittings including making the disturbed surface good as per existing specification,as in repair with fancy type SS brackets and SS knobs for curtain rods, to fix on wall all fittings, complete all as specified and directed. |
| 68 | S&Fin repair PVC waste pipe for WHB including all fittings, complete all as specified and directed. |
| 69 | Cleaning and removing all scale and dirt, etc, using jute brush from inside & out side of 250 Ltr to 500 ltrs capacity PVC water tanks and from mouths of connected pipes, removing the scale and dirt etc, to a distance of not exc 500 mtr, washing the tanks with water , cleaning the connecting pipes with bleaching powder solution and finally applying 2% potassiun permaganate solution for disinfection, marking with white paint on tank " Date of Cleaning the tank, complete all as specified and directed. |
| 70 | S&F in repair 100/125 mm dia CP grating with/without hole, complete all as specified and directed by Engr-in-Charge |
| 71 | S&F in repair PVC tank lid (cover) suitable for 500/1000 ltrs capicity water tank with hinged and hooked fixing by steel screw for existing PVC water tank on building, , complete all as specified and directed by Engr-in-Charge. |
| 72 | M&L for 18mm thick medium density fibre board,exterior gradewith both side veneere laminated, fixed to timber frameworkas in cupboard shutters including leeping/beading fancy typewith screws, complete all as specified and directed. |
| 73 | S&F for soft closing clip on hinge, full / half overlay type, of stainless steel, complete all as specified and directed. |
| 74 | S&F 100mm size extruded aluminium alloy handles, fabricated type anodiseed, complete all as specified and directed. |
| 75 | S&F for telescopic type ball bearing slide & runner, suitable for drawers, complete all as specified and directed. |
| 76 | M&L for heavy duty vitrified coloured paving tiles of size 300mm X 300mm x 9-10mm thick exterior grade set and jointed with neat cement slurry and pointed in coloured or white cement to match the shade of tiles,laid over including 15mm thick screed bed in CM 1:6, complete all as directed and directed. |
| 77 | Dismantling of pavers blocks/tiles of any description or thickness in floors, aprons etc. laid dry orpointed, including labour only for re-fixing in the same place/position, complete all as directed and directed. |
| 78 | M&L for 75mm thick PCC 1:2:4, type B1, (using 20mm gradedcrushedstoneaggregate)asin floor finished, surface finished even and smooth without using extracement includingmakingjoint in blocks not more than 10sqmandateach cornerthejointshallbefilledwithbitumenmasticfillingtofull depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed. |
| 79 | M&L factory made Machine pressed precast concrete interlocking rubberisedpaver block any shape or size conforming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and no pigment laid over and including 25mm thick sand layer including dismentling of old unsv paver block complete all as specified and directed by Engr-In-Charge. Note : Sand will be marasured and paid separately. |
| 80 | M&L for sand filling under floors 25mm thick tibba sand cushioning and filling the joints upto full depth with fine tibba sand, complete all as directed and directed. |
| 81 | Demolition of cement concrete (unreinforced) in ground floors and paving not exc. 15cm thickness (below or above ground level), including removal of rubbish outside MoD land, complete all as specified and directed by the Engineer in Charge. |
| 82 | M&L for Plain cement concrete 1:2:4type B-1 (20mm graded stone aggregate) 40 mm thick as flooring/Rooffinished even & smooth without using extra cement , complete all as specified and directed by Engineer-in-Charge |
| 83 | M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as bed block ,coping , cills, steps etc, complete all as specified and directed by Engineer-in-Charge. |
| 84 | Demolition of stone slabs/paver block and tiles of any description or thickness infloors,apronsetc.,laid,beddedandpointedinanymortar, complete all as specified and directed. |
| 85 | M&Lformachinecutpolishedkotastoneslabflooring18-20mm thickovercementscreedbaselaid andjointedwithgrey cement slurry mixed with pigment to match the shade of the slab,laid over andincluding20mm thick screedbedinCM1:6, rubbing,grindingandpolishingtoachievemirrorfinish,complete all as specified and directed. |
| 86 | M&Lforpolishedkota stoneslab 18 -20 mmthick inriser of steps,skirting,dado andpillar laid over cement screed and jointed with greycement slurrymixed withpigment to match theshade oftheslab, laidoverandincluding10mmthick renderinginCM1:6, rubbing,grinding,roundingof edges andpolishingtoachievemirrorfinish,completeallas specified and directed. Note : Kota stone shall be laid in one piesce for treads and risers for step, window cills and moulding/rounding of edge properly. |
| 87 | Contract Amount shall be derived after affecting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
