Dakshinanchal Vidyut Vitran Nigam Limited-DVVNL has published Tender For Bill Of Quantities For Replacement Of Roof Sheet Of The Staff Office Building, Door & Window And Other Associated Civil Works At The Office Of The Ee, Eudd-I Sukuwan-Dukuwan Colony Jhansi District-Jhansi.. Submission Date for this Tender is 22-04-2024. Civil Work Tenders in Jhansi Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing & fixing at all heights, levels and locations 0.47 to 0.52 mm colour finish Aluminium alloy roofing Tata Durashine or equivalent make sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately)(NSI) |
| 2 | S/F 2mm thick Polycab/Acrylic transparent sheet of approved quality as per direction of E/I including supply of all materials, labour and T&P etc requrired for proper completion of the work (NSI) |
| 3 | Cement concrete with 2cm gauge approved hard stone ballast, coarse sand and cement in proportion of 4:2:1including supply of all materials, labour, side shuttering ifrequired and T&P etc. required for proper completion of work.(CSI No. 5.06) |
| 4 | RCC work with cement, approved coarse sand and2cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P.(CSI No. 5.23) |
| 5 | First class brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of allmaterials, labour & T&P etc. required for proper completion of work.(CSI No. 6.01) |
| 6 | First class brick work in 1:6 cement and coarse sand mortar in Super-structure of one Brick thick including supply of allmaterials, labour & T&P etc. required for proper completion of work (CSI No.6.01+6.07+6.08) |
| 7 | Brick work in foundation & plinth with old dismantledbricks (supplied by department free of cost) and coarse sand mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete.(CSI No. 6.18) |
| 8 | Mild Steel or Iron work in heavy sizes such as trusses built upgates, door frames, record racks, roof work, gates etc. wrought torequired form including holes, rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor.(CSI No. 9.01) |
| 9 | AS in item 9.01 above but when steel is to be provided by the department.(CSI No. 9.02) |
| 10 | Supply and fixing galvanised mosquito proof jali (16x24 gauge) with M.S. flat of 20 x 3 mm. size, on both sides screwed or welded to window or door frame. (CSI No. 9.18) |
| 11 | 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.(CSI No. 11.09) |
| 12 | Painting or varnishing new iron work in small areas or new woodwork with one coat of ready mixed priming paint and one coat ofapproved superior quality ready mix paint "Luxol" or equivalentbrand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. (CSI No. 13.01) |
| 13 | As in item 13.01 above but every coat after the first coat. (CSI No. 13.02) |
| 14 | As in item 13.01 but for every coat on previously Painted old wood or iron work including its sand papering, rubbing & cleaning as required for proper completion work.(CSI No. 13.03) |
| 15 | One priming coat and one coat oil bound distemper on new work includingsupply of all materials,labour and T&P etc. required for propercompletion of the work. (CSI No. 13.08) |
| 16 | As in item 13.08 but for every coat after the first coat. (CSI No. 13.09) |
| 17 | As in item 13.08 but for every coat on previously old oil bound distemper surface.(CSI No. 13.10) |
| 18 | Applying Birla or equivalent putty on previousaly birla smoothen surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.21) |
| 19 | Painting one coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.22) |
| 20 | Same as in item no 13.22 above but for every coat of additional APEX or equivalent brand weather coat paint . (CSI No. 13.23) |
| 21 | Same as in item 13.22 but for each coat ofAPEX or equivalent brand weather coat paint .on previously treated surface. (CSI No. 13.24) |
| 22 | Dismantling brick work or stone work in lime or cement mortar andincluding stacking of materials as directed by theEngineer-in-charge within a distance of 60 metres.(CSI No. 15.01) |
| 23 | Dismantling reinforced cement concrete or reinforced brick work,including stacking of dismantled materials as directed by theEngineer-Incharge within a distance of 60 metres.(CSI No. 15.03) |
| 24 | Dismantling corrugated iron & asbastas roof sheet and stacking of materials as directed by Engg-in-charge within a distance of 60 mtrs. (CSI No. 15.07) |
| 25 | Scrapping old white or colour wash or distemper including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M. (CSI No. 15.12) |
| 26 | S/F of LED Bulb 9Watt bajaj or equivalent make as approved sample and make as per direction of Engineer in charge (NSI) |
| 27 | S/F of 07 Watt LED bulb Syska or other equivalent make including cost of labour, T&P etc required for proper completion of the work (NSI) |
| 28 | Supply and fixing of 3mm thick Fiber sheet The rate are inclusive of all labour, materials, cartage, T&P etc required for proper completion of the work (NSI) |
| 29 | Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface, complete with 14 SWG copper earth continuity wire,GP Box ,piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect, as directed . 2018 PWD 121C |
| 30 | Wiring points for two ways light with 1.5 sq. mm .FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface, complete with 14 SWG copper earth continuity wire, GP Box , two ways 2 nos. piano type switches & ceiling rose/ angle/ batten holder on 3mm. thick phenolic laminated backelite sheet etc., complete in all respect, as directed. 2018 PWD 122C |
| 31 | Wiring point for fan /fresh air fan(light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm. thick phenolic laminated backelite sheet etc, complete in all respect 2018 PWD 123C |
| 32 | Wiring Point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface,complete with 14 SWG copper earth continuity wire , GP Box and piano type switch and socket etc. complete in all respect. 2018 PWD 124B |
| 33 | Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC Conduit with one number 2.5Sq.mm multistrand copper conductor cable as earth continuity wire, complete in all respect.2018 PWD 211C |
| 34 | Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.2018 PWD 1139 |
| 35 | Renewing panes of 4.8 to 5.7 mm glass including supply of glass with putty and brads including supply of all materials, labour and T&P etc. required for proper completion of the work.(c) Glass of 3mm thick. (CSI No. 20.04) (ii)Same as above itembut 3 mm thick panes. |
| 36 | Easing door and windows. (CSI No. 20.05) |
| 37 | Renewing door cleats including supply of all materials,labour & T&P etc. required for proper completion of the work. (CSI No. 20.06) |
| 38 | Fixing panes of glass with and including putty brads and including supply of all materials,labour and T&P etc. required for proper completion of the work but excluding cost of glass. (CSI No. 20.07) |
| 39 | Labour for fixing door bolts or hinges or tower bolts or hasp and staples or handles etc.to doors and window. (CSI No. 20.10) |
| 40 | Disposal of rubbish / debris out side the UPPCL area as per direction of Er/in- charge including cartage, labour and materials, T&P etc. required for proper completion of the work. (No. deduction for voids shall be made).(CSI No. 20.16) |
| 41 | Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete(CSI No. 20.17) (c) Tower bolts 10 mm dia x 100 mm long. |
| 42 | Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete (CSI No. 20.17) (d) Iron hinges 100 mm size.12 gauge.thick |
| 43 | Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete(CSI No. 20.17) (f) M.S.handles 100 mm size |
| 44 | Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete (CSI No. 20.17) (h)L-drop 16 mm dia x 200 mm long. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
