Tender For Upgradation Of Existing Civil Foundations Water Pumps 27020144 10 10 10 DESIGN,ENGG,PREPARATION OF DRAWINGS 1 LO Email : MOHAMMED.SAFVAN@AMNS.IN Contact : Name : Mohammed Safvan Item Details : AS per Scope of work: A. Upgradation/Modification of existing civil foundations of various water pumps: As per expansion plan f, the utility requirements of the plant must be enhanced. The pump finalization to meet the additional volume has been completed by AMNS. The contractor scope includes the following items. Mode 1: Modifications in existing pump house civil foundation. 1. Visiting the site to understand the existing pump foundations. 2. Studying the GA drawings of new high-capacity pumps, motors, and existing foundations. 3. Detailed study and submission of report to the necessary modifications required to existing foundations. 4. Submission of all design and detail Engg drawings with minimum modifications along with BOQ and bar bending quantities to be given. 5. The piping modifications at sump or discharge if any w.r.t new pumps should be identified, and design and feasibility analysis have to be taken up accordingly. Any civil related application of sealant along specification need to be suggested. Item Note : 2 27020144 20 20 10 ENGINEERING/TECHNICAL STUDY 1 LO Email : MOHAMMED.SAFVAN@AMNS.IN Contact : Name : Mohammed Safvan Item Details : AS PER SCOPE OF WORK B. New pump house civil works <(>&<)> Head loss report: 1. A new pump house is proposed to be constructed beside the existing pump house for which tapping will be taken from existing sump. However, the head loss due to tapping should be calculated and the final suction head available in the new pump house to be calculated with the available data. All calculation methodology and detailed report has to be submitted.( Please note the design new pump house was completed by AMNS and was not included into this proposal). 2. It has to be noted that as the modification of the existing pump house results in plant numerous shutdowns. AMNS intends to reduce the no of shutdowns involved in the utility upgradation. So, the contractor has to do a detail analysis on arrangement of pumps within new pump house and existing pump house such that the shutdown required for modifications in existing pump house will be minimised. Item Note : 3 27020144 30 30 10 DESIGN,ENGG,PREPARATION OF DRAWINGS 1 LO Email : MOHAMMED.SAFVAN@AMNS.IN Contact : Name : Mohammed Safvan Item Details : AS PER SCOPE OF WORK: C. Civil <(>&<)> Structural design detailing for Ball mill foundation modification, vibrating screen building: 1. Piping, Piperack design, Structural design related to conveyor modification: Design and DE of Piping, Pipeline support/ Piperack from the new ball mill discharge to Vibrating screen <(>&<)> from screen discharge to Line1/Line2 screen underflow pump box <(>&<)> Line-2 regrind mill. The tentative GA has been given for your reference. Isometric drawings and BOQ for including valves, pipe fittings should be submitted. • The Engineering agency scope involves design of new civil foundation/ modification of existing foundations for conveyors. A modification should such V-plough or tripper or any alternative design with necessary drawing and BOQ should be submitted such that diversion of material to two different directions can be done as per operations requirement of AMNS. • Design <(>&<)> DE of all structural drawings, civil drawings of conveyors, technological structures etc will be under Engg Agency scope. Page 2 of 3 ArcelorMittal Nippon Steel India Limited AM/NS B/P KIRANDUL Palnar Road,,Near Manual Loading Point,Kirandul,494556,Chhattisgarh,India GSTIN 22AAACE1741P1ZR PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000109435 Date 02.04.2024 Submission Date 12.04.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ null RaviKishore Borra Contact Email ravikishore.borra@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details • All drawings basic, design <(>&<)> detailing has be shared in ACAD <(>&<)> PDF formats. • All BOQ should be shared in excel <(>&<)> Technical specifications in word document. • New vibrating screen oversize feeding to 3900A/3900 to be considered. • As these new facilities are brown field projects, space constraint and availability of space needs to be identified and AMNS has final rights to freeze the GA. • Vendor should be open to take up design revisions-based site requirements and AMNS operational requirements. • All new facilities have to be superimposed on the existing plant layout of AMNS. • All drawings required for statutory approvals like factories inspectorate, municipal approvals will be under contractor scope. • Any suggestions / revisions from AM/NS to be considered. 2. Ball Mill foundation modification detailing: AMNS Kirandul intends to install a 7th ball mill on the existing foundation which was constructed during plant inception. However, the existing foundation may or may not suit to the new 7th Ball mill that is yet to be finalized on M/s Metso or M/s FLSmidth. So, the consultant should take up civil design and detail engineering with minor modifications to current civil foundation such that existing foundation will become suitable to the finalized Ball mill. All required design and detailed drawing shall be provided by the Engg consultancy upon AMNS submission of equipment GA drawings and load data. All modifications with detailed methodology and material specifications to be submitted with by the ENGG agency. 3. Vibrating Screen building civil and structural detailing: Vibrating screen building civil and structural detailing will be under consultant scope. All civil and structural detail engineering should be taken up upon AMNS circulation of the equipment GA drawing and load data. Item Note : 4 27020144 40 40 10 DESIGN,ENGG,PREPARATION OF DRAWINGS 1 LO Email : MOHAMMED.SAFVAN@AMNS.IN Contact : Name : Mohammed Safvan Item Details : AS PER SCOPE OF WORK: D. Civil <(>&<)> structural, Piping Engg of High gradient magnetic separator -2 Nos: 1. AMNS intends to install a High gradient magnetic separator (HGMS) or equivalent no’s of SLON for magnetic separation of iron ore inside the existing plant. All civil design and detailing engineering will be under consultant scope. 2. AMNS will submit the GA drawing and load data of finalized equipment will be shared by AMNS. 3. Piping, Piperack, Cable trays related to HGMS as per AMNS finalized flow sheet should be designed by the Engineering consultant. Scope includes submission of BOQ with valves, fitting , pipelines, isometric drawings, civil and structural drawings Piperack etc should be designed by the contractor. Item Note : 5 27020144 50 50 10 DESIGN,ENGG,PREPARATION OF DRAWINGS 1 LO Email : MOHAMMED.SAFVAN@AMNS.IN Contact : Name : Mohammed Safvan Item Details : AS PER SCOPE OF WORK: E. Workers Canteen: As the existing worker facility is overlapping with the new project facilities, it has been decided to build a new building to cater the needs of workers. The new facility will have G+2 floors consisting bottom floor with workers canteen and Kitchen, additional two floor consisting of 12 rooms each. Building Specification (tentative may change during round of discussions): Page 3 of 3 ArcelorMittal Nippon Steel India Limited AM/NS B/P KIRANDUL Palnar Road,,Near Manual Loading Point,Kirandul,494556,Chhattisgarh,India GSTIN 22AAACE1741P1ZR PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000109435 Date 02.04.2024 Submission Date 12.04.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ null RaviKishore Borra Contact Email ravikishore.borra@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details Building Dimensions: 28.2 m X 13.2 m Ground Floor: For Workers Dining <(>&<)> Kitchen 1st Floor and Second floor: For Workers Accommodation The scope of Engg Agency is as follows: a. Preparation of layout of the premises of available land including new canteen building b. Incorporation of Worker canteen layout in the overall plant layout c. Preparation of relevant GA drawings and layouts for municipal / other statutory permissions d. Detailed engineering of the guest house including civil, structural, electrical, plumbing and flooring e. Layout drawing for each floor / each room with dimensions and positioning of the furniture. f. Construction drawings for execution of civil, structural, electrical, plumbing and flooring. g. Design of interior and exterior of the building including false ceiling, decorative lighting, elevations, painting colour combinations h. Load calculation for electrical installations including bedroom, hallway, kitchen, gym, dining, and all other facilities i. Design of proper sewage system j. Design of total water requirement of the building and a suitable overhead tank k. Specifications of all items for construction - Civil, structural, electrical, plumbing and flooring l. BOM preparation for all construction activities including civil, structural, electrical, plumbing and flooring. m. Specification for all interior and exterior works n. BOM Preparation for all exterior and interior works and costing should be done. o. Greenery development plan, parking, etc. around the New canteen within the boundary wall. p. Suitable specifications for furniture and amenities along with BOQ. q. Any other work/recommendations/design specification BOQ required for completion of guest house in a liveable condition. r. Tender preparation for all services and material supply related to above mentioned works. s. Submission of as-built drawings t. Required site visits to be considered, accommodation will be provided with food on payable basis. u. All drawings to be submitted in ACAD, PDF format along with soft copies and BOQs in excel format, Specifications in word format. v. Design shall be completed based on specifications/layouts attached in Sections 2/3 with same number of rooms, facilities, and dimensions. w. Accommodation during site visit will be under AM/NS Scope with Food on payable basis. x. All BOQs to be submitted in excel format and Specification Sheets in word format. y. Any suggestions / revisions from AM/NS to be considered
