Delhi University has published Tender For Providing And Fixing Water Storage Tank And Repair Work In Pro Office At Ovrl, Repair Water Supply Line, Sanitary Fittings And Other Allied Works, University Of Delhi.. Submission Date for this Tender is 09-04-2024. Water Pipe Line Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 2 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. |
| 3 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. |
| 4 | 15 mm dia. nominal bore |
| 5 | 20 mm dia. nominal bore |
| 6 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 7 | 15 mm nominal bore |
| 8 | 20 mm nominal bore |
| 9 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 10 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 11 | 25 mm nominal bore |
| 12 | 20 mm nominal bore |
| 13 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 14 | 15 mm nominal bore |
| 15 | 20 mm nominal bore |
| 16 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore |
| 17 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. |
| 19 | Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. |
| 20 | 100 mm diameter pipes |
| 21 | 150 mm diameter pipes |
| 22 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : |
| 23 | 15 mm diameter pipe. |
| 24 | 20 mm diameter pipe. |
| 25 | 25 mm diameter pipe. |
| 26 | 32 mm diameter pipe. |
| 27 | 40 mm diameter pipe. |
| 28 | 50 mm diameter pipe. |
| 29 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
| 30 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore |
| 31 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms. |
| 32 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White |
| 33 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 34 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 35 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid |
| 36 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 37 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 38 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 39 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 40 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm |
| 41 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 42 | 200x10 mm |
| 43 | 150x10 mm |
| 44 | 100x10 mm |
| 45 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm |
| 46 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper |
| 47 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : 15mm nominal bore |
| 48 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 49 | Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 50 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm |
| 51 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia |
| 52 | French spirit polishing : Two or more coats on new works including a coat of wood filler. |
| 53 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 54 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 55 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 56 | P/F PVC water storage tank cover 500 to 1000 ltr of approved quality and make capacity with locking arrangement etc complete as per direction of Engineer in charge |
| 57 | Cleaning of roofs, vertical rain water pipes, spouts, sunshade, removing of peepal trees, grass and unwanted vegetations from parapet and roof, vertical stacks and collecting malba / kooda at ground floor complete. For disposal. |
| 58 | Providing and fixing handle lever for flushing cistern make as per direction of Engineer-in-charge |
| 59 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work. i/c removing dry or oil bound distemper water proofing cement paint and the like by scrapping sand papering, p/a white cement based putty over the wall surface and applying primer with water thinnable cement primer on wall surface etc complete in all respect to get a smooth and even finish as directed by the Engineer-in Charge. |
| 60 | Providing and fixing C.P. brass pillar cock approved make 15 mm nominal bore as per direction of engineer in charge |
| 61 | P/F cistern syphon ofapproved quality and make complete as per direction of Engineer-in-charge |
| 62 | Improvement of vertical blind i/c removing and refixing after repair & washing etc. complete as per direction of Engineer in charge. |
| 63 | P/F cistern ballcock ofapproved quality and make complete as per direction of Engineer-in-charge |
| 64 | P/F Dura Cell in the existing battery box and other equipments etc. complete. (AA Dura Cell Ultra) |
| 65 | Taking out PVC water tank 500-1000 ltr capacity and depositing the same in Engineering Store as per direction of Engineer in charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
