Tender For Tanker Filling Point 2 Tpws At Ghodki Project At Ghodki Tq Washi Dist Dharashiv Under Scarcity 2023-24
Tender Value
13.62 Lakhs
Estimated cost
Bid Submission
08 Apr 2024
0 days left
EMD
13628
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
washi → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Tanker Filling Point 2 Tpws At Ghodki Project At Ghodki Tq Washi Dist Dharashiv Under Scarcity 2023-24
BOQ
| Sl. No. | Item Description |
| 1 | SUBWORK NO 1 : WATER COLLECTION PIT IN SUBMERGENCE OF DAMExcavation in general in soft material comprising of soft soil, soft murum, sand, hard murum with boulders in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, Supply Well, etc. for lift 0 to 1.5M and lead of 150 M including barricading, guarding, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in-charge, etc.complete excluding refilling. |
| 2 | Excavation in general in hard material comprising off soft rock hard rock Manjara rock, etc. by blasiting controlled blasting, chiseling as required in wet or dry condition for Head works i.e. Intake well. Connecting Pipe. jack well, pump House, supply well, etc. for lift 0 to 1.5 M and lead of 150 M including barricading, guarding, disposing of surplus excavated stuff within a radius of 0.5 Km. As directedby Engineer-in-charge.Lift 1.50 to 3.00 M |
| 3 | Lift 3.00 to 4.50 M |
| 4 | Dewatering the excavated trenches and pools of water in the building trenches/pipeline tren-ches, well works by using pumps or other devices including desposing off water to safe dist-ance as directed by engineer-in-charge. ( Including cost of machinery, Labour charges etc ) |
| 5 | SUBWORK NO. 2 : PUMPING MACHINERYProviding, erecting and giving test of Centrifugal Monoblock pump set conforming to IS 9079 operating at 2900 RPM with CI impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type. Pump set shall be suitable for working at various discharge and head requirements. Pump shall be erected on Provided C.C. foundation block with suitable foundation bolts grouted in C.C. foundation block. Submersible monoblock Pump set (with Bronze / Stainless steel(CF8M) Impeller) Horizontal / Vertical - up to 3 stages10 BHP Pumpset |
| 6 | Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material likeechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.A.) PE-100 a) 6 Kg/Sq. cm :90 mm dia. HDPE Pipe |
| 7 | Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP - 10 H.P. consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter / voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc |
| 8 | Supplying and erecting flat flexible 3 core 6 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.3 Core6 Sqmm |
| 9 | Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulicjack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 |
| 10 | Providing and supplying Rassietc. complete. |
| 11 | SUBWORK NO 3 : RISING MAINExcavation for foundation / pipe trenches in earth.Soils of all types. Sand, gravel and soft murum, including removing the excavatedmaterial up to a distance of 50 meters andlifts as below, stacking and spreading as directed,etc complete |
| 12 | Excavation for foundation / pipe trenches in hard murumincluding removing the excavated materialup to a distance of 50 m beyond area and lifts as below, stacking spreading as directed by Engineer- in- charge normal dewatering,preaparing he bed for foundation excluding backfillingetc complete |
| 13 | Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry Foundation asphalt roadincluding removing the excavated materialup to a distance of 50 m beyond area and lifts as below, stacking as directed by Engineer- in- charges etc complete |
| 14 | Excavation for foundation / pipe trenches in Hard rock& concrete by controlled blasting,including trimming & levelling the bed by chisseling where where lifts as below, stacking as directed by Engineer- in- charges normal dewatering, etc complete |
| 15 | Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15 cm to 20 cm layers including watering and compactioncomplete. |
| 16 | Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material likeechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. A.) PE-100 a) 6 Kg/Sq. cm :110 mm dia 6 kg/cm2 HDPE Pipe Line |
| 17 | Providing and Supplying ISI mark G.I. pipe of following class and diameter including all taxes (Central and local Insurance ,railway freight, unloading from railway wagon, loading into track transport to departmentally stores /site, unloading stacking etc. comp. Note:-One coupler shall be provided with each full length pipe cost of which included in rates below a) 100 mm dia.G I Pipe (Medium class) |
| 18 | Providing double flanged short body pattern type manually operated Butterfly Valve having body.disc and end cover in graded cast iron to IS-210 Gr.CF 200 generally confirming to IS-13095-1991, Synthetic rubber faced ring secured on disc by retainning ring with stainless steel screw stub shaft of stainless steel riding in teflon bearing including inspection charge transporation up to departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc.excluding C.C. foundation/structural steel support.100 mm dia Non Return Valve |
| 19 | 100 mm dia Sluice valve |
| 20 | Providing & supplying at site of work CI/ PVC /GIspecials suitable for above said pipes including cost of all taxes fright chargesoctroi loading Unloading conveyanceetc. |
| 21 | Providing and supplying Air Valves as per IS- 14845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete.50 mm.Air Valve Single Ball |
| 22 | Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulicjack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634110 mm dia 6 kg/cm2 HDPE Pipe Line |
| 23 | Lowering ,laying and jointing G.I.pipes and specials of following class and dia. C.I./M.S. specials of following dia. Including conveyance from store to site of woks all labour ,giving satisfactory hydraulic test etc comp. Either under ground or in vertical position as directed by Engineer in charge a) 100 mm dia.G I Pipe (Medium class) |
| 24 | Lowering,laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, cincluding nut bolts and giving satisfactory hydraulic testing, etc.complete. (Rate for all class of Valves)100 mm dia Sluice Valveand NRV |
| 25 | Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M- 150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design) Foundation on Murum and Harder Strata. |
| 26 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leadsand lifts including consolidation , surcharging, etc. complete. |
| 27 | Dismantling dead pipeline of M.S./ R.C.C./ C.I./ P.S.C. and G.I./ A.C./ P.V.C./ S.W./ H.D.P.E. pipe including cost of necessary excavation and refilling of trenches, breaking the joints, lifting the pipes and stacking to theplace as directed by Engineer-in-charge with all leads and lifts including cleaning the surface, etc. complete.110 mm dia pipeline hdpe |
| 28 | SUBWORK NO 4 : TRIAL AND RUNCommissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by MJP / Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge.For single village without WTP |
| 29 | MSEB Charges Pure Water P/Mach |
| 30 | Material Bleaching Powder |
AI Tender Summary
Tender Timeline
Apr 02, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedApr 08, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 10, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender