Rural Development Department has published Tender For Temporary Water Supply Scheme At.Chincholi Jahagir , Ta.Omerga, Dist.Dhrashiv Under Scarcity. Submission Date for this Tender is 08-04-2024. Water Supply Project Tenders in Osmanabad Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | SUB WORK-BORE WELL |
| 2 | Item No 1. :-Survection Charges For Borewell Site by Asst./Jr. Geologist |
| 3 | Item No 2. :- Drilling of 180 mm dia. Borewell by DTH Rig Machine |
| 4 | Item No 3. :- Providing and fixing 180 mm PVC casing pipe (6 kg/sq.cm) as per IS47985-1988etc. |
| 5 | Item No 4. :- Lowering, Handling and Grouting for 180 mm PVC casing pipe |
| 6 | Item No 5. :- Providing and fittingPVC Cap for 180 mm casing pipe |
| 7 | Item No 6. :- Yield testing of borewell by Flushing (air lift method) on90 degree ""Vee Notch""including flushing of borewell . |
| 8 | SUB WORK-PUMPING MACHINERY |
| 9 | Item No 1. :- Providing erecting and giving test of submersible pump set confirming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft, motor suitable for working on 415 V +- 10% , 3 PH , 50 HZ A.C.supply with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable uction stainer.pump should have suitable discharge out let as per manufactures design.antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single/double run and 2 pairs of suitable size erection clamo 10 mm thick shall be provided with each pump. Submersible pump 150 mm dia (with bronze/ stainless steel (CF8M) impeller) up to 8 stage head Submersible pump of 7.5 BHP 18 Stage |
| 10 | Item No 2. :- Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.C. Submersible/ centrifugal pump set up to 7.5 HP - 10 H.P. consisting of DOL starter having relay range 28-42 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc. |
| 11 | Item No 3. :- Supply and erecting flat flexible 3 core 4 sq mm pvc sheathed submersible type copper cable suitably clamped at fixed interval with column pipe assembly complete |
| 12 | Item No 4. :-Supplying and erecting ISI mark GI pipe 50 mm dia.‘B’ class at position with accessories complete as per specification no. CW-PLB/GP. |
| 13 | Item No 5. :- Supplying and erecting ISI mark GI pipe 50 mm dia.‘B’ class at position with accessories complete as per specification no. CW-PLB/GP. |
| 14 | Item No 6. :- Supplying and erecting ISI mark UPVC Type Column pipe 50 mm Dia. Confirming to ISO 4427-1995 manfactured from virgin resin PE 80 food grade compounded Raw material with required accessories and quality assurance certificate from quality agency etc.complete. |
| 15 | Item No 7. :- Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 4 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 16 | SUB WORK-RISING MAIN |
| 17 | Item No 1. :- Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. Working pressure -6Kg/Sqm.,Dia. In mm 90 |
| 18 | Item No 2. :- Providing and supplying Specials |
| 19 | Item No 3. :- Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. a) Sluice valves - PN -1 Without byepassDia in mm 80 |
| 20 | Item No 4. :-Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Reflux valves as per I.S.5312 Part I (1984) a) Reflux valves - PN -1 Without byepassarrangementdia in mm 80 |
| 21 | Item No 5. :-Providing and supplying Air Valves as per IS -14845 - 2000 and MJP’s standard specifications of approved make and quality of following diameters includingrailway freight, inspection charges, unloding from railway wagons, loading into truck, transportation upto departmental stores / site, unloding and stackingexcluding GST levied by GOI & GOM in all respect etc. complete. Air Valve Single Ball Flanged / Screwed Type - PN -125 mm dia |
| 22 | Item No 6. :- Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attached.) Foundation on Murum and Harder Strata. up to 150mm |
| 23 | Item No 7. :- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.Lift 0 to 1.50 M |
| 24 | Item No 8. :-Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.50 M |
| 25 | Item No 9. :-Excavationfor foundation/ pipe trenchesin soft rock&old cement& lime masonary foundation, asphaIt raod includingremoving the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.50 M |
| 26 | Item No 10. :- Filling inplinth floors murum bedding intrenches with approved murum from excavatedmaterialsfromfoundation15to20cmlayersincludingwateringand compaction complete. |
| 27 | Item No 11. :- Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. Working pressure -6Kg/Sqm.,Dia. In mm 90 |
| 28 | Item No 12. :- Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.. Working pressure -6Kg/Sqm.,Dia. In mm 90 |
| 29 | Item No 13. :- Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. Reflux valve dia in mm 80 |
| 30 | Item No 14. :- ProvidingandconstructingB.B.masonryvalvechamberwith15cmthick1:2:4 proportionPCCbedding,excludingexcavation,B.B. masonryin C.M. 1:5 Proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. As above of 60x45cm internal size and depth upto 0.9 m with precast R.C.C slab and cover. |
| 31 | Item No 15. :- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 32 | Item No 16. :- Dismantling dead pipeline of M.S./ R.C.C./ C.I./ P.S.C. and G.I./ A.C./ P.V.C./ S.W./ H.D.P.E. pipe including cost of necessary excavation and refilling of trenches, breaking the joints, lifting the pipes and stacking to the place as directed by Engineer-in-charge with all leads and lifts including cleaning the surface, etc. complete.For G.I. / A.C. / P.V.C. / S.W. / H.D.P.E. 80 mm |
| 33 | SUB WORK-TRIAL RUN , CHEMICAL , ELECTRIC POWER SUPPLY , ELECTRIC CHARGES. |
| 34 | Item No 1. :-Commissioning, running and maintaining the scheme to quantities, rated capacity, including managing necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and 3 months for regional scheme, together with training of personnel spared by MJP / Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge. Note : Required chemicals to be supplied by Department free of cost and electricity bill will also be paid by the Department. a) For single village without WTP |
| 35 | Item No 2. :- Chemical and Materials |
| 36 | Item No 3. :- Electricity Charges |
| 37 | Item No 4. :- Provision for power supply at head works site for pumping machinery & lighting etc. including cost of poles condutctor etc. complete including charges of MSEB Quotation for pumping machinery etc. |
| 38 | SUB WORK-GST Charges |
| 39 | Item No 1. :-Provision for GST Charges |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
