Jharkhand Industrial Infrastructure Development Corporation Limited has published Tender For Remaining Work Of Lah Processing Unit At Bundu Ranchi.. Submission Date for this Tender is 22-04-2024. Civil Work Tenders in Ranchi Jharkhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 09-Apr-2024 | Corrigendum 1 | Other | 22-04-2024 |
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item - A) and disposal ofexcavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design building specification and direction of E/I. |
| 2 | Earth filling in foundation trenchesand plinth in layers not exceeding 150 mm thick well watered rammed, fully compacted & fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M & lift of 1.5 M all complete as per building specification and direction of E/I.( mode of measurement compacted volume) |
| 3 | Earth filling in foundation trenchesand plinth in layers not exceeding 150 mm thick well watered rammed, fully compacted & fine dressed with earth obtainedafter cuttingwithin a lead of 50 M & lift of 1.5 M all complete as per building specification and direction of E/I.( mode of measurement compacted volume) |
| 4 | Providing coarse clean sand/Crusher Dust in filling in foundation trenchesor plinth including ramming & watering in layers not exceeding 150 mm thick with all leads and lifts including cost of materials, Labour, royality & taxes all complete as per building specification and direction of E/I. ( mode of measurement compacted volume) |
| 5 | Providing designation 75B one brick flat soling joint filled with local sand including cost of watering. |
| 6 | Providingand laying in position ( P.C.C) M-75 cement concrete of specified grade excluding the cost of centering and shutting-All work upto plinth level.1:4:8 (1 cement :3 coarse sand:6 graded stone aggregate 40 mm nominal size) |
| 7 | Providingand laying in position ( P.C.C) M-100 cement concrete of specified grade excluding the cost of centering and shutting-All work upto plinth level. |
| 8 | Providing P.C.C M-150 with nominal mix (1:2:4) in foundationwith approved quality of stone chips 20 mm to 6 mm graded and clean coarse sand of FM 2.5 to 3 including screening shuttering mixing cement concrete in cement mixer & placing in position , vibrating, striking, curing. royalty and taxes all complete job as per building specification and direction of E/I. |
| 9 | Making plinth protection 50 mm thick of cement concrete (1:3:6) (1 cement:3 coares sand:6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size,well remmed and consolidated and grouted with fine sand,including necessary excavation.levelling and dressing and finishing the top smooth. |
| 10 | Providing 250 mm wide drain in cement mortar (1:6) with av. 150 mm clear depth and 250 mm apron including cost of earthwork involved with 75 mm cement concrete (1:4:3) over one brick designation 75 A flat soling in proper graded and slope all the base the drain duly plastered in C.M (1:3)with punning over exposed surface all complete as per building specification and direction of E/I |
| 11 | Providing and layingdamp proof course 50 mm thick with cement concrete1:2:4 (1 cement:2 coarse sand (zone-III) :4 graded stone aggregate 20 mm nominal size) |
| 12 | Providingand laying in position specified grade of reinforced cement concrete ( in foundation) M-200,excluding the cost of centering,shutting andfinishing reinforcement-All work upto plinth level.(Footing with Pedstal) 1:1.5:3 (1 cement :1.5 coarse sand (zone-III):3 graded stone aggregate 20 mm nominal size) |
| 13 | Cenering and shuttering include shuttering propping etc. and removal of from for foundation,footing,bases of columns for mass concreteFoundation,footing,bases of columnsfor mass concxrete |
| 14 | Reinforced cement concrete work in wall (any thickness),including attached pilasters,buttresses,plinth and string course,fillets,Coloumns,pillars,piers,abutments,post and struts etc. aboveplinth level upto floor level,excluding cost of centering,shuttering,finishing and reinforcement. 1:1.5:3 I1 cement:1.5 coarse sand(zone-III),:3 graded stone aggregate 20 mm nominal size) |
| 15 | Centering and shuttering including strutting,propping etc. and removal of form for Columns,Pillars,Piers,Abutments,Posts and Struts |
| 16 | Reinforced cement concrete work inbeams, suspended floor, roofs having slope up to 15"" landing, balconies, shelver, chajjas , lintels, bands, plan window sills, staircases and spiral stair case above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement: 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 17 | Lintel.Beams,Plinth Beams,Girders,Bressumers and Cantilevers. |
| 18 | Wheather Shed,Chujjas,Corbels etc. including edges |
| 19 | Cenering and shuttering include shuttering propping etc. and removal of from forSuspended floors,Roofs,Landing,Balconies and access Platform with water proof ply 12 mm thick |
| 20 | Providing Tor steel reiforcement of 8mm. 10mm, 16 mm& 20mm dia. Bars as per approved design and drawing excludinjg carriage of M.S. bars to work site, cutting, bendig and binding wiith annealed wire with cost of wire, removal of urst placing the rods in position all complete as per building specification and direction of E/I. |
| 21 | Providing designation 100 A brick work fly ash lime brick (FLAG)conforming to I: 12894-1990 (9""x4.5""x3"") in C.M.(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials raking out joints to 15mm depth , curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 22 | Providing designation 75 A brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials raking out joints to 15mm depth , curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 23 | Providing designation 100 A brick work fly ash lime brick (FLAG)conforming to I: 12894-1990 (9""x4.5""x3"") in C.M.(1:6) in Supe structure and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials raking out joints to 15mm depth , curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 24 | Providing 12 mm Thk. cement plaster(1:6) on walls with clean coarse sand of FM-1.5including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all completeas per building specification and direction of E/I |
| 25 | Providing 6 mm Thk. cement plaster(1:4) in ceiling with clean coarse sand of FM-1.5including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all completeas per building specification and direction of E/I |
| 26 | Supplying,fiting and fixing 20 guage G.C.I. sheet gate fitted on M.S. Angel frame of size 60x60mm including cost of fabrication,prpviding necessary locking arrangement with haskal and dommy duty fixed in P.C.C. (1:2:4) blocks of required size ,applying a priming red lead paint over steel work taxes all complete as per draewing specification and direction of E/I |
| 27 | Supplying,fiting and fixing M.S.grill gate with M.S. grills made of 20x6mm M.S. flats or 16mm M.S. square bars fitted on 25x25x6mm M.S. Angle frame including cost of fabrication,providing necessary locking arrangement with haskal and dommy duty fixed in P.C.C. (1:2:4) blocks of required size ,applying a priming red lead paint over steel work taxes all complete as per draewing specification and direction of E/I |
| 28 | Supplying and fixing rolling shutter of approved made of required size m.s. laths,interlocking together trough their intire length and jointed together at the end by end locks,mounted on specially designed outside locking with push and pull operation complete,including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength comformingto IS:4454 Part-I and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S laths with 1.25 mm thick top cover |
| 29 | Providing two coats of plastic emulsion paint of approved shade and make over new surface including cost of cleaning surface thoroughyy and removing the scales of smoke and moss marks with jhama rubbing, scaffolding, washing, of floors and taxes all complete as per building specification and direction of E/I. |
| 30 | Providing two coats snow cem coats over new surface with approved quality of lime including cost of cleaning surface thoroughyy ad removing the scales of smoke and moss marks with jhama rubbing, scaffolding, washing, of floors and taxes all complete as per building specification and direction of E/I. |
| 31 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface |
| 32 | Providingprimer two coats of red lead paint ofapprovedmake over new steel surface including prepairing the surface after cleaning,removing dirt,scales.smoke,grease and sand papering,including cost of scaffolding and taxes, all complete as per building specification and direction of E/I. |
| 33 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly,scaffolding and taxes, all complete as per building specification and direction of E/I. |
| 34 | Carriage of Materials Sand.Lead-15 Km |
| 35 | Stone Chips,Lead-10 Km |
| 36 | Brick ,Lead-8 Km |
| 37 | Metal-Lead-15 Km |
| 38 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and Is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top.... Anodised aluminium |
| 39 | Providing and fixing Ist qualityCeramic glazedwall tiles conforming to IS:IS: 15622 (Thickness to be specified by the manufacturer),of approved make, in all colour, shades except brugundy,bottle,green,black of any size as approved by E/I, in skirting risers of steps and dodo,over 12 mm thick bed of cement mortar 1:3 (1 cement:3 coarse sand) and jointing with grey cement slurry @ 3.3 kg/sqm,including pointing in white cement mixed with pigment of matching shade complete. |
| 40 | Providing and laying Ist qualityCeramic glazedfloor tiles 300x300 mm(Thickness to be specified by the manufacturer),of 1 st quality conforming to IS: 15622 OF approved make, in all colour such aswhite,ivory,Grey,Fume Red Brown,laid on 20 mm thick cement mortar 1:4(1 cement:4 Coarse sand) jointing with grey cement slurry @ 3.3 Kg/Sqm including pointing the joints with white cement and matching pigment etc complete. |
| 41 | Rewewing fly proof wire netting in doors and windows with fly proof screen of 18 S.W.X12 to 16 mesh per cm2 with sal wood beads all complete as per specificationand direction of E/I |
| 42 | Providing and fixing 18 mm thick gang saw cut,mirror polished,premoulded and prepolished,machine cut for kitchen platform,vanity counters,window sills,facias and similar locations of required size,approved shade,colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1cement ::4 coare sand),joints treated with white cement,mixed with matching pigment,epoxy touch ups,including rubbing,curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab of all colour and texture except black,cherrt/Ruby red. |
| 43 | Proving and fixing factory made PVC door frame size 50x47 mm with a wall thickness of 5 mm made out of extruded 5 mm ridge PVCfoam sheet,mitred at corners and jointed with 2 nos of 150 mm long brackets of 15 x15 mm M.S square tube,the vertical door frame profiles to be reinforced with 19x19 mm M.S sqatre tube of 19 mm gauge,EPDM rubble gasket weather seal to be provided though out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer"s specification and direction of E/I |
| 44 | Providing anf fixing factory made panel PVC shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mmx19 mm for styles and 15x15mm for top and bottom rail,M.S. frame shall have a cost of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC "C" channel of size 30 mm thickess,70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall bed in 45 degree on the inner side to form top and bottom rail 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form sides to form lock rail ,top,bottom and lock rail shall be provided both side of the panel,10mm (5mmx2) thick.20mm wide cross PVC sheet be provided as gap insert for top rail and bottom rail, panelling of 5mm thick both side PVC shrrt to be fittted in the M.S. frame welded/ sealed to the styles and rails with 7 mm (5mm+2mm) thickx15mm wide PVC sheet beading on inner side,and jointed together with solvent cement adhesive.An additional 15 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the "C" Channel using PVC solvent adhesive etc. complete as per direction of E/Imanufacture"s specification and Drawing.30 mm thick pre laminated PVC door shutters |
| 45 | Providing and fixing on wall face unplasticised Rigid PVCrain water pipes conforming to IS: 13592 Types A ,including jointing with seal ring conforming to IS: 5382,leaving 10mm gap for thermal expansion, (i) Single socketed pipes.110 mm diametre |
| 46 | Providing and fixing on wall face unplasticised- PVCmoulded fittings/ accessories for unplasticised Rigid PVCrain water conforming to IS: 13592 Types A ,including jointing with seal ring conforming to IS: 5382,leaving 10mm gap for thermal expansion, (i) Single socketed pipes.Single Tee without door. 110 mm diametre |
| 47 | Providing and fixing circular/Hexagonal cast iron or M.S. sheet box for ceiling fan clamp,of internal dia. 140 mm,73 mm height,top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding,top lid shall be screwed into the cast iron/ M.S sheet box by means of 3.3 mm dia. round headed screws,one lock at the corner.Clamp shall be made of 12 mm dia. M.S. bar bent to shape as per standard drawing. |
| 48 | Providing and fixing glazaing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket With float glass panes of 4.0mm thickness |
| 49 | Structural steel work riveted bolted or weldedin built upsection,truss and fixed framed work ,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer all complete. |
| 50 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 51 | Providing and fixing precoated galvanised steel sheet Roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Grid-7 to 11 Ridge |
| 52 | and Grid-7-11-Gutter |
| 53 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with sea; ring conforming to IS:5382, leaving 10mm gap for thermal expansion, Single socketed pipes 110 mm Rain water pipe |
| 54 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 55 | Coupler - 110mm |
| 56 | Bend - 110mm |
| 57 | Shoe - 110 |
| 58 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete110 mm |
| 59 | Providing and applying white cement bsed putty / White cement of average thickness 1 mm of approved brand and manufacturer,over thr plastered wall surface to prepare thesurface even and smooth conplete. |
| 60 | Finishing walls with Acrylic smooth exterior paint of required shade:-New work (Two or more coats applied @ 1.67 liter/10 Sqm over and including piming coat of exterior primer applied @ 2.20 kg/10 Sqm |
| 61 | Providing and fixing white vitrous chainatypewater closet ( European type W.C. pan) with seat and lid 10 litre low level white vitreous china. flushing cictern and C.P. flush bend with fitting and C.I brackets 40 mm flush bend,overflow arrangement with special of standard make and mosquito proof coupling of approved municipal design complete,including painting of fittings and brackets,cutting and making good the wall and floors wherever required.W.C. pan with ISI marked white solid plastic seat and lid. |
| 62 | Providing and fixing water closet squatting pan( Indian type W.C. pan) with100 mm sand cast iron P andS trap, 10 litre low level white P.V.C. flushing cictern including flush pipe,with manually controlled device ( handle lever) comforming to is: 7231,with all fittings and fixtures complete,including cutting and making good the wall and floor wherever required. White vitreous china Orissa pattern W.C . Pan of size 580x440mm with integral type foot rests. |
| 63 | Providing and fixing 8 mm dia C.P/S.S. Jet with flexiable tube upto 1 metre long with S.S.Traingular type W.C. of quality and made as approved by E/I. |
| 64 | Providing and fixing white vitrous chainaflat back half stall urinal of size 580x380x350mm with white PVC automatic flushing pipe,sereades with urinal and clamps (all in C.P. brass) with waste fitting in C.P. brass,including painting of fittings and cutting and making goodthe walls andfloor wherever required. Single half urinal with 5 litre P.V.C automatic flushing cictern |
| 65 | Providing and fixing wash basin with C.I. brackets 15mm C.P brass single hole basin mixer of approved quality and make,including painting of fitting and brackets,cutting and making good the walls wherever required.White Vitreous chaina Wash basin size 630x400mm with a 15 mm C.P. brass single hole basin mixer. |
| 66 | Providing and fixing C.P brass angle valve for basin mixer and geyser point of approved quality conforming to IS: 893115 mm nominal bore |
| 67 | Supplying,fitting and fixing the following items complete with all materials as per specification and direction of E/I. |
| 68 | Mirror of 6 mm thick plate glass bevelled edge mirror including C.P. brass revolving fitting 3 mm ply wood board and C.P. hinges to fix with mirror.Size-450mmx300mm |
| 69 | C.P. brass tower rail 20mmx600mm with bracket container |
| 70 | C.P. brass dish container medium quality with screw and hinges etc.C.P brass liquid soap container |
| 71 | Providing and fixing gun metal non-return valve of approved quality (Screwed end) 25 mm nominal bore-(Vertical) |
| 72 | Providing and fixing PVC waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexble pipe-40 mm dia |
| 73 | Providing and fixing PTMT Swivelling shower 15 mm nominal bore weighing not lessthan 40 gm |
| 74 | Providing and fixing on wall face unplasticised Rigid PVCrain water pipes conforming to IS: 13592 Types A ,including jointing with seal ring conforming to IS: 5382,leaving 10mm gap for thermal expansion, (i) Single socketed pipes110 mm diameter. |
| 75 | Providing and placig on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked, with cover ad suitable locking arrangement and making necessary holes for ilet,outlet and overflow pipes but without fittings and the base support for tank. |
| 76 | Providing and fixing CPVC ( Chlorinated Polyxinyl Chloride pipes,having thermal stability for hot and cold water supply,including all CPVC plain brass threaded fittings,i/c fixing the pipe with clamps at 1.0 m spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. 15mm nominal outer dia pipes |
| 77 | 25 mm nominal outer dia pipes |
| 78 | 32 mm nominal outer dia pipes |
| 79 | Constructing brick masonarychamber for undergroun C.I. inspection chamber and bebds with bricks in cement mortar1:4 (1 cement :4 coarse sand)C.I. cover with frame (light duty)455x610 mm internal dimensions,total weight of cover with frame to be not less than 38 Kg ( weight of cover 23 kg and weight of frame 15 kg)R.C.C top slab with 1:1.5:3 mix (1 cement:1.5 fine sand :3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10(1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat of neat cement on wall and bed concrete etc. Complete as per standard design.Insidedimension 500x 700 mmand 45 cm deep for pipe line with one or two inlets.With common burnt clay F.P.S (non modular) bricks of class designation 7.5 |
| 80 | Labour for laying,fitting and fixing NP-2 R.C.C. spun pipe with collars in lines,level and grade and providing approved jointing materials and joints properly filled to make them leak,proof including providing sigth rail,bonning rod,night guard,Red light and barrier etc. all comlplete as per specification and direction of E/I.150 mm dia. R.C.Cpipe |
| 81 | Point Wiring in PVC conduitwith piano type switchWiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit,with modular types switch,modular plate,suitable size G.I. box etc.as requiredGroup-B. |
| 82 | Power plug wiring in PVC coduit (2x4 Sq.mm)Wiring fo light/ power plug1.5 Sq.mm FR PVC insulated copper conductor single core cable in surface/recessed copper conductor single core cable for loop earthing as required. |
| 83 | Supplying and fixingModular typeSwitch/scoketSupplying and fixingModular typeSwitch/scoket on the existing modular plate and switch box including connection but excluding modular plate etc. as required.5/6 amp,3 pin socket outlet |
| 84 | 15/16 amp one way switch |
| 85 | Supplying and fixing PVC/G.I BoxesSupplying and fixing suitable size G.I.box with Modular plate and cover fixing 3 pin 5/6 amp modular socket outlet 5/6 amp modular typeswitch connection painting etc. as reuired accessories;-121mmx173mmx48mm deep (6""x8"") |
| 86 | 75 mm x75mmx50mm deep(4""x4"") |
| 87 | Supplying and fixingBatten holder:Supplying and fixingBatten/ angle holder including connection etc. as required.: |
| 88 | Supplying and fixing T.P. MCB DB Supplying and fixingfollowing way,single pole and neutral sheet,MCB distribution board 240 volton surface/recess,complete with tinned copper busbar,neutral busbar,earth bar, din bar, detachable gland plate,interconnection,phoshatized and power painted including earthing etc. as required (But without MCB/ RCCB /Isolator)2 way,single door |
| 89 | Supplying and fixing2 pin 5 amp Ceiling rose on the existing junction box/wooden block including connection etc. as required. |
| 90 | Supplying and fixingPiano type switch/socket:--Supplying and fixingfollowing Piano type switch/socket on existing swiotch box.cover including connection etc. as required.5/6 amp,one way switch |
| 91 | 15/16 amp,one way switch |
| 92 | Wiring for Curcuit submain wiring along with earth wire with the following size PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required.2x1.5 sq.mm+1x1.5 sq.mm earth wire |
| 93 | 2x2.5 sq.mm+1x2.5 sq.mm earth wire |
| 94 | Supplying and fixingModular type electronic fan regulator:-Supplying and fixingstepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 95 | GST@18% |
| 96 | Labour cess@1% |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
