Delhi University has published Tender For Renovation, Addition-Alteration Work Of Ground Floor Of Existing Porta Cabin Opposite Maharishi Ved Vyas Centre For Research And Innovation & Rooms At Second Floor, Block-C Ofhansraj College, University Of Delhi.. Submission Date for this Tender is 11-04-2024. Cabin Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantaling & Demolishing |
| 2 | Demolishing P.C.C. / R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within College campus lead as per direction of Engineer - in- charge. |
| 3 | Demolishing brick work with plaster & wall tile / without plaster manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within College campus lead as per direction of Engineer-in-charge. (No Extra payment will be paid of Plaster & wall Tiles). |
| 4 | In cement mortar |
| 5 | Removing doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within College campus lead : |
| 6 | Of area 3 sq. metres and below |
| 7 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in college campus including alllead as directed by Engineer-in-charge. |
| 8 | Removing & Refixing of existing ceiling lights & Existing Ceiling Fans as per Proposed Layout of Ground floor of Porta Cabin & Second floor of Block-C including New Wiring of 1.5/2.5 sq mm with new 20mm dia conduit or in old conduitas per site condition in existing switch board. including dissconnection, connection, testing & Comminssioning as per direction of EIC. |
| 9 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, all loads including all lifts involved. Note:- Malba quantity is equal to dismantled material / items. No factor will apply in MB. |
| 10 | Concrete Work |
| 11 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centring, shuttering and finishing : (Cement Make : Ultratech, JK, Ambuja, Binani) |
| 12 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 13 | Providing Pest Control and Anti-Termite Treatment by appointing a specialised agency as per the secifications mentioned by the bureau of indian standards and agencies specfications (whichever is higher), for general civil, plumbing/ drainage and timber/ carpentary works, gypsum related work, including a 5-Year guarantee under suitable undertaking on stamp paper etc., complete as directed. ( Mode of measurement to be on carpet-area of floor and not the area of surface treated.) |
| 14 | Brick Work |
| 15 | Brick work withcommon burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 16 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 17 | Flooring Work |
| 18 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption"s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. basic rate1400/- per Sqm. Make:-(Somany, Asian, Kajaria, orient). |
| 19 | Size of Tile 600x600 mm |
| 20 | Providing and laying 80mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including the cost of 50mm thick compacted bed of fine sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. make: Nitco, somany, Nimco, orient, rak, RK Tiles. |
| 21 | Finishing |
| 22 | 12 mm cement plaster of mix : |
| 23 | 1:4 (1 cement: 4 fine sand) (Cement Make : Ultratech, JK, Ambuja) |
| 24 | 15 mm cement plaster on rough side of single or half brick wall of mix : |
| 25 | 1:4 (1 cement: 4 coarse sand) (Cement Make : Ultratech, JK, Ambuja) |
| 26 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : |
| 27 | With cement mortar 1:4 (1 cement : 4 fine sand) (Cement Make : Ultratech, JK, Ambuja) |
| 28 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (Make :- Asian , Berger , Nerolac.) |
| 29 | Old & New work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 30 | Finishing walls with Acrylic Smooth exterior paint of required shade : (Make :- Asian , Berger , Nerolac.) |
| 31 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 32 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Make :- JK , BIRLA |
| 33 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Make :- Asian , Berger , Nerolac. |
| 34 | Two or more coats on old / new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 35 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Make :- Asian , Berger , Nerolac. |
| 36 | Providing and fixing 18mm thick gang saw cut mirror polished premould and pre polished machine cut for kitchen platforms, vanity counters, window cill, facia ,dado, wall cladding, Staircase tread, riser and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment complete at all levels. (Basic rate:-Rs.300/- sqft.) |
| 37 | a) Granite of any colour and shade |
| 38 | a2) Area of slab over 0.50 sqm. |
| 39 | Providing and fixing tiled false ceiling of approved materials of size 595mmx595 mm , 15 mm thickin true horizontal level suspended on inter locking metalgrid of hot dipped galvanized steel sections (galvanized @ 120gsm/sqm, both side inclusive) consisting of main T" runner withsuitably spaced joints to get required length and of size 24x38mm" joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. |
| 40 | (a) Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 x mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-charge. |
| 41 | (b)15mm thick Mineral Tile with grid system along with all necessary fitting in all Rooms & passage as per CPWD specification.. (Make :- ArmStrong /Gypteck/ Everest/Anutone) |
| 42 | Supplying and fixing manual roller blind of Zebra designof make Vista / Mac or equivalent aproved fabricwith all necessary fittings, fixture & pelmet complete in as per the direction of Engineer-in-Charge. ( Basic rate 5500/-sqm) |
| 43 | Wood grained wooden sound slats paneling for rear wall, side walls &front: Providing and fixing Wood melamine finish MDF based panels with lineal perforations to be fixed on walls.The panels shall bewith melamine laminate finish of size 2430mm x 192mm x17mm with 4mm slats at 28 mm pitch, Toungue and Groove edges for seamless mounting having density of 750 to 800kg/m3 . The back of the panels are perforated with 10mm diameter circular holes with a nonwoven fabric covering of 0.2mm for providing Sound absorption via the acoustic impedance method.Panel is to be fixed on GIframework as recommended by the manufacturer with screw fixed horizontal / vertical to wall at every 600mm c/cin tongue & groove system on GI framework. The cavity of framework should be inserted with 50mm thick, 1000 GSM polyester wadding insulationcovered in Tranparent polythine sheet. The entire system to be FR grade fire retardant. (Approved Make: Acoustic Solution / Absound Overseas / Topakustik / Antone / Himalaya Accoustic.) |
| 44 | Providing and fixing of approved WPC wall panelling, the line and level of the panelling is proper (if existing surface not smoth so use the channel for levelling the surface), two sections joint with steel screw, size of the strip is used 250mm x 10mm, single side cornice and double side cornice, etc. with the all necessary fittings complete in the direction of engineer-in-charge. |
| 45 | Aluminium / Steel Work |
| 46 | Providing and fixing partition up to ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corner (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture"s specification and direction of engineer in charge all complete. |
| 47 | 75 mm overall thickness partition with 12.5 mm thick double skin fire rated board conforming to IS: 2095: part I. |
| 48 | Tapered edge calcium silicate board made with calcareous & siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with compressive strength 225 kg/sq.cm, Bending strength 100 kg/sq.cm. |
| 49 | Gypsum board conforming to IS: 2095 Part - I . |
| 50 | 12.5 mm thick. |
| 51 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : |
| 52 | For fixed portion |
| 53 | Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (Make:-Hindalco, Jindal , Indian Aluminium Co.) |
| 54 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 55 | Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (Make:-Hindalco, Jindal , Indian Aluminium Co.) |
| 56 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. (Make:-Novapan , BUTAN , ECO BOARD.) |
| 57 | Pre-laminated particle board with decorative lamination on both sides. |
| 58 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): (Make:- Modi Guard, Saint Gobain , ASI.) |
| 59 | With float glass panes of 5.50 mm thickness |
| 60 | Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. |
| 61 | Polyester powder coated minimum thickness 50 micron aluminium. |
| 62 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : |
| 63 | 125x64x1.90 mm |
| 64 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 65 | 250x10 mm |
| 66 | 150x10 mm |
| 67 | Supply and installation of Aluminium powder coated two track Sliding type window with safety grills with the all necessary locking arrangement of size 1200mm X 1800mm X 80mm with 16 gauge with one fix glazed ventilator as per Drawing inclosed as per CPWD Specification in existing puff panel wall / cement board partition wall of porta cabin at Ground floor & First floor faculty department Rooms after making opening in existing puff wall as per direction of EIC. The thickness of glass of 5.5 mm fixed with EPDM Rubber / Neoprene Gasket. |
| 68 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (for payment purpose only weight of stainless steel members shall be considered including fixing accessories such as nuts, bolts, fasteners etc.) |
| 69 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: |
| 70 | Roof Panels - The Prefabricated Room roof shall be constructed of (50+30) MM thick PUF insulated panels having 40+2 Kg/m3 density lined with 0.5mm thickpre coated GI sheet both side. The top sheet of the panel is in trapezoidal shape. These panels shall have overlap joinery system. Eachpanels shall have reinforcement m.s. tube of 40mmx40mmx1.2mm. The polyurethane will be conforming to IS 12436-1988 and flammability as per 52 DIN 4102 part-1. The PU is injected into the panel with a high pressure dispensing unit capable of forming a panel in single shot. The hydraulic press has oil heated platens which allow smooth flow of PUF chemicals mixture when it is injected for forming of panels. including in front of Creche gutter provision for rain water pipe. (Above Toilet block) |
| 71 | Jointing system of Roof Panels- The Roof panels are joined with the wall panels with internal &external flashings made from PCGI sheets and duly riveted with the wall & roofing. |
| 72 | CCTV WORK |
| 73 | SITC 32CH 4 SATA H.265+ 4K Network Video Recorder32 Channel IP video access, Support 4 SATA HDDs up to 10TB Each, 2 USB Ports, AI by NVR: 1-channel face detection and recognition; 2-channel perimeter protection; up to 10 face databases and 20,000 face images; 4-channel SMD Plus, 1 HDMI / 1 VGA simultaneous video output, Support Multi-brand network cameras, AI by Camera: Face detection and recognition, perimeter protection; SMD Plus; ANPR; people counting; stereo analysis; heat map as directed by EIC of College.Make:- CP PLUS, Bosch, Hicvision, ANG. |
| 74 | SITC 4 MP IP WDR IR Network Dome Camera 1/2.7” 4Megapixel PS CMOS Image Sensor, 25/30fps@4M(2688×1520), H.265+ and H.264+ triple-stream encoding, WDR(120dB), Day/Night(ICR), 3D-DNR, ROI, AWB, AGC, BLC IR Range of 30 Mtrs,PoE as directed by EIC of College. Make:- CP PLUS, Bosch, Hicvision |
| 75 | SITC 4 MP IP WDR IR Network Bullet Camera 1/3” 4MP PS CMOS Image Sensor (0.84667cm), Outputs max. 4 MP (2560 × 1440)@25/30 fps, Instastream/Smart H.264+ Dual-stream encoding, DWDR, Day/Night (ICR), 3D-NR, ROI, AWB, AGC, BLC, HLC, 3.6mm fixed lens (2.8mm Optional), IR Range of 30 Mtrs, IP67, PoE, Support Built-in Mic, as directed by EIC of College. Make:- CP PLUS, Bosch, Hicvision. |
| 76 | SITC 6TB HDD Surveillance as direction by EIC of College. Make:- SEAGATE/ WD |
| 77 | SITC 9U Wall Mount Rack with PDU 6 Socket with Cooling FAN 2 NosWall Mount Rack 9U 630mm deep 19". 1.6mm Vertical Mounting Rail with clear "U" Marking. 0.8mm CRCA Sheet. Cooling Fan options (min 2). Cable entry/exit provision (minimum 2)at top and bottom with rubber at edges. Front with Toughened Glass Door & Lock (5mm). Powder coated Color- RAL- 7035. Wall Mounting Kit as directed by EIC of College. Make:- DYNAMIC |
| 78 | SITC 43" UHD 4K LED TV (24x7) with 3 Mtr HDMI Cable ,if required as directed by EIC of College. Make:- SAMSUNG/LG |
| 79 | SITC 24 Port PoE10/100/1000Mbps Gigabit Layer 2 Managed Switch as directed by EIC of College. Make:- DLINK |
| 80 | sitc 8 Port 10/100/1000Mbps Gigabit PoE Switch as direction by EIC of College.Make:- DLINK |
| 81 | SITC 1 KVA Online UPS for PoE Switches as directed by EIC of College. Make:- MICROTEK |
| 82 | SITC RJ 45 Connector as directed by EIC of College. Make:- MICROTEK |
| 83 | SITC1KVA Online UPS with 60 Minute Power Backup as directed by EIC of College. Make:- BPE, Mictrotek . |
| 84 | SITC 12V 42AhBatteryincluding Battery connection cable & accessories with rack as directed by EIC of College. Battery Make:- EXIDE / LUMINOUS. |
| 85 | SITC CAT 6 UTP 24 Port Loaded Patch Panel as directed by EIC of College. Make:- DLINK |
| 86 | Providing & laying CAT 6 4 Pair Copper Cable Armoured as directed by EIC of College. Make:- DLINK |
| 87 | SITC 2 Core 1.5 sq mm Power Cable including the cost of conduit of required size as directed by EIC of College. Make :-NATIONAL, polycap, K.K CABLE, KALINGA. |
| 88 | SITC Providing & fixing 25mm Medium PVC Conduit Pipe with Accessories as directed by EIC of College. Make :-AKG / SETIA/ POLYPACK |
| 89 | SITC IP66 Enclosure Box for IP CCTV as directed by EIC of College. Make:- DYNAMIC |
| 90 | SITC of 6 core single mode fibre cable Make D link |
| 91 | Electrical Works |
| 92 | Wiring for light point /fan point/exhaust fan point/call bell point with 1.5 Sq.mm FRLS PVC insultated copper conductor multistrand wire in surface/recessed PVC conduit,with modular switch, modular plate, suitable size GI box and earthing the point with 1.5 sq.mm.FRLS PVC insulated copper conductor multistand copper wire etc. as required. Wire Make: Havells ,k k kable, Polycab, Finolex. Conduit Make:- Supreme, Prakash, Satia. Switch Make:- Anchor Roma, North West, Legrand. |
| 93 | Loop Point Wiring for light point /fan point/exhaust fan point/call bell point with 1.5 Sq.mm FRLS PVC insultated copper conductor multistrand wire in surface/recessed PVC conduit,and earthing the point with 1.5 sq.mm.FRLS PVC insulated copper conductor multistand copper wire etc. as required. Wire Make: Havells ,k k kable, Polycab, Finolex . Conduit Make:- Supreme, Prakash, Satia. Switch Make:- Anchor Roma, North West, Legrand. |
| 94 | Supply & Installation of the following wiring accessories, complete with recessed/surface type metal boxes, modular gridplate, faceplate and accessories in walls/partitions as directed by EIC of College. Make:- Legrand |
| 95 | 1 no.5/6 amp. oneFive pin socket with one switch |
| 96 | 2 nos. 5/6 amp.Five pin socket with one switch |
| 97 | 15/16 amp. oneFive pin socket with one switch |
| 98 | 15 amp Three pin scoket with switch for Hi wall Air- conditioning unit. |
| 99 | Wiring for circuit/submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductorwire in surface/recessed PVC conduit as required as directed by EIC of College. Wire Make: Havells ,k k kable, Polycab, Finolex |
| 100 | 2 x 2.5 sq.mm + 1 x 2.5 sq. mm earth wire |
| 101 | 2 x 4 sq.mm + 1 x 4 sq.mm earth wire (for power) |
| 102 | Providing and fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as directed by EIC of College. Conduit Make:- Supreme, Prakash, Setia. |
| 103 | 25 mm |
| 104 | 32 mm |
| 105 | Supply, installation, testing & commissioning of following surface / recessed type fluorescent tube lighting fixtures complete with lamps, control gear & low loss CW ballasts celing fansand bracket fans as directed by EIC of College. |
| 106 | (a) 2"x2" Surface light/recesseLed Light 32 watts including all fixture as per approved material list approved by Engineer incharge Make:- Philips, Siska, Wipro, Havells, Bajaj |
| 107 | (b) 48"BLDCCeiling Fans with all accessories & regulator of energy/power saving feature approved by client. Make- Havells Philips, Siska, Wipro, Bajaj |
| 108 | Supply, installation, testing & commissioning of following surface / recessed type fluorescent tube lighting fixtures complete with lamps, control gear & low loss CW ballasts celing fansand bracket fans as directed by EIC of College. |
| 109 | Providing and fixing in position suitable 1.6 mm thick G.I. outlet box with 2 Nos RJ - 45 for Data/ voiceoutlet including crimplingwith all fixing accessories as required as directed by EIC of College. |
| 110 | Supply and Laying including numbering / ferruling of wire (8 digit) and the continuity test for each cableofCat 6 - Telephone / Data cable in existing G. I. Channel / conduit as directed by EIC of College. |
| 111 | Supply and fixing of 1.6 mm thick G.I Box with Hylum sheet over outlets as required as directed by EIC of College. |
| 112 | Supply and fixing of 1.6 mm thick G.I Box along with RG 11 TV Co axial socket with Cover Plate for TV Outlets as directed by EIC of College. |
| 113 | Supply drawing connecting testing and commissioning of TV Coaxial cable RG 59 in existing conduit for CCTV System/telphone as directed by EIC of College. |
| 114 | Supply and Installation of ventilation exhaust fan upto 450 mm size sweep in the existing wall after making opening, including making the hole to suit the size of the above fan,making good the damage, coonection,testing,commissioning etc. as required including frames and louvers shutter as directed by EIC of College. Make:- Havells, Usha, Bajaj, Philips, Anchor. |
| 115 | Supplying, laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV armoured/ unarmouredPVC insulated PVC sheathed aluminium /copper conductor cables conforming to IS : 1554 Part I - 1976 with latest amendments laid over MS supports in existing RCC ducts/ laid in ground /laid on Cable Trays including End termination, Joints & clamping the cables to supports in an approved manner as required complete with all accessories. Make:- Finolex , Havells, Polycab. |
| 116 | 4 c x 16 sq.mm YFY Cable |
| 117 | 4 c x 25 sq.mm YFY Cable |
| 118 | 3.5Core 185 Sqmm Cable. |
| 119 | Supply and installation of sheet metal enclosed double door 12 Way TPN DB, each phase consisting of 12 Nos. 10/20 AMP SP MCB’s and controlled by one number 63 Amps DP MCB. ELCB on each phase as directed by EIC of College. Make:- Hager, Legrand , L&T. |
| 120 | Supply & installation of underfloor raceways of powder coated CRCA Mild Steel of following sizes inclusive of cutting, chasing & refinish with cement plaster in PCC/IPS flooringas directed by EIC of College. |
| 121 | 100 mm x 38 mm x 2 mm thick |
| 122 | 50 mm x 38 mm x 2 mm thick |
| 123 | Supply & Installation under-floor junction boxes fabricated from 14 gauge CRCA Mild steel, duly epoxy painted / powder coated after 7 tank processes, with screwed recessedtop covers, screwed plates on four sides, of the following sizes as directed by EIC of College. |
| 124 | 200 mm x 200 mm x 40 mm |
| 125 | 150 mm x 150 mm x 40 mm |
| 126 | Removing, re-installation, including suspension, testing and commissioning of exsiting250 A MCCBinplace of 100 A to 250A existing TPN MCCB for use on, 3 phase, 4 wire, 415 V, 50 Hz, A.C. supply including jointing of sections, flexible joints, expansion joints, bends, Thimble, Gland as required as per Direction Engineer- in- Charge. |
| 127 | SITC 150 mm wide DLP PVC trunking adaptable trunking system and with all accessories with required size of cover with clip on support. Make: Legrand/R.K.copper & alloy |
| 128 | HVAC WORK |
| 129 | SITC of split type Air conditioning (5 star rated) including pressure test with N2 gas, vaccumining , commissioning of AC and cabling between indoorandout door Unit as per direction of EIC . Make : Daikin, Loyyed, O-General, Samsung . |
| 130 | (a) 1.8 TR inverter AC |
| 131 | SupplyandinstallationofcopperpipingincludingtheNirile insulation of Air Conditioning unit as per direction of EIC . |
| 132 | Iron base frame wall / roof mounted stand for out door unit at any height on external wall of Building as per direction of EIC . |
| 133 | Supply and fixing the Automatic voltage stabilizer cap 4.0 KVA including all necessary cables, conduiting and chiseling of wall as per direction of EIC |
| 134 | Supply and fixing of PVC drain water piping complete with fittings, support as per specification and insulated with 6 mmthickinsulated with XLPE Foam closed cell cross linked polythene insulation as per direction of EIC |
| 135 | (a) 25 mm dia |
| 136 | SITC of Covered GSS Cable Tray of suitable size for exposed piping . 300 mm width |
| 137 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (with 36 nos. 5A to 32AMCBs and suiteble size incomer ) as required as per direction of EIC . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) as directed by EIC of College. Make :- Indo- Asian / Legrand / LT |
| 138 | (a) 12 way (4 + 36), Double door |
| 139 | INLINE FANS - ACOUSTICALLY LINED |
| 140 | Supply, Installation, Testing & Commissioning of inline fans for Fresh air supply complete with sheet metal casing, 25mm thick acoustic insulation, direct driven centrifugal fan, motor with proper protectionandinspection door. Fanshall be suitable for operation on 220+6 % volts, 50 Hz,1 phase AC power supply. Flanges to be provided on both sides to facilitate duct connections. Fan shallbe installed as shownin the drawings and will be of followingcharacteristics : All single phase inline fans shall be provided with factory fitted speed regulators. All Fans Should be complete with Plug Top & necessary power cable. Fans shall have low noise level in rage of 35-40dBA @3m and shall be suitable for indoor installations. |
| 141 | FanCapacityS.PArea to |
| 142 | No. (Cfm)(mmWG)to be exhausted |
| 143 | a. IF-1 200017-18 Fresh air Supply |
| 144 | b. IF-21600 17-18 Exhaust air Supply |
| 145 | Conventional Site Fabricated Ductwork |
| 146 | Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. |
| 147 | Thickness 0.80 mm sheet |
| 148 | Thickness 1.00 mm sheet |
| 149 | Supply, Installation and Testingof of extruded aluminium powdercoated Linear Gril. |
| 150 | a. 200x200 |
| 151 | Supply, Installation and Testingof of extruded aluminium powdercoated Intex Louve Grill. |
| 152 | Cleaning Services of existing Hi Wall Air Conditioning unit includingthe Cost of Refilling itsGas as per site condition. |
| 153 | FIRE ALARM SYSTEM & DETECTION SYSTEM |
| 154 | SITC of Addressable Multi Sensor - Heat Cum Smoke detector with base with Binary coded address setting. Dual LED’s for 360° visibility. Sleek low-profile housing design. Regular 100mm base. IP Rating : IP - 42 as directed by EIC of College. Make : Apollo/ GST. |
| 155 | Supplying,installation,testing&commissioningofResponse Indicator on surface/recessed MS Box having two LED as directed by EIC of College. Make : NSD/Honeywell. |
| 156 | Supply, Installation, Testing & Commissioning of fault isolator for isolating shorted, dewired and loose circuit between to successive fault isolator with automatic resetting arrangement including base etc as per complete as required as directed by EIC of College &LPCB APPROVED. Make : Apollo/ GST. |
| 157 | Supplying, installation, testing & commissioning of addressable Fire control module complete as required as directed by EIC of College &LPCB APPROVED. Make : Apollo/ GST. |
| 158 | Supply, Installation, Testing & Commissioning of Intelligent addressable Manual Call Pointbreak glass type with alarm LED as detailed complete as required as directed by EIC of College & LPCB APPROVED. Make : Apollo/ GST. |
| 159 | Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required as directed by EIC of College & LPCB APPROVED. Make : Apollo/ GST. |
| 160 | Supplying,assembly,erection,testingandcommissioning of addressable Input Monitor Module complete as required as directed by EIC of College & LPCB APPROVED. Make : Apollo/ GST. |
| 161 | Supply and installation of fire extinguisher (4 kg) ABC / N2 with all necessary accessories complete as required as directed by EIC of College. |
| 162 | S & fixing of fluorescent exit sign board which can be hanged from the ceiling as directed by EIC of College. |
| 163 | Supply, installation,connecting, testing and commissioning of 2 Zone Fire Alarm Panel with battery back up etc. complete as required as directed by EIC of College. |
| 164 | Supplying & laying of 2x1.5 sqm FRLS armoured cable as directed by EIC of College. Make : Polycab/ Havells. |
| 165 | Providing , fixing,jointing and testing of Heavyduty C-class M.S. pipes conforming to IS with accessories like tees, elbows, flanged joints, rubber insertion, nuts, bolts or welded joints including fixing the pipe with suitable flat iron strip clamps/ brackets, structural members, dash fastener, cutting hole and chases in walls, floor, R.C.C. slab etc, and making good the same, incluiding painting pipes and fittings with one coat of primer and two coats of postal red enamel paint complete as reqd. |
| 166 | 100 mm dia |
| 167 | Providing and fixing cast iron body IS: 210FG 220 and double flange gear simple operationtype butterfly valve conforming to IS: 13095 with SS304 disc and shaft NITNLE rubber replaceable seat of the following size complete with bolts, nuts, washers and rubber insertions as per specification. Make: Zolato |
| 168 | 150 mm dia. |
| 169 | Providing and fixing single headded hydrants flanged inlet with 63 mm female instantanious outlet of gunmetal complete with male blank caps, chains conformingto IS: 5290 type A with stainless steel orifice plateto keep the pressure not more than 3.5 kg/sq cm at any point. |
| 170 | Providing 63 mm dia 15m long reinforced rubber lined hose pipe conforming to IS" 636-1992 Part-II with gunmetal make coupling wire wound with pipe as required |
| 171 | Providing and fixing 63 mm dia 15m long canvas hose piple complete with gunmetal make & female couplingwire wound with the pipe. The pipe shall confirmto IS:4927 |
| 172 | FURNITURE |
| 173 | Providing & fixing Center Table of Six 1800mm (L)X 900 mm(W) X 750mm (H) , in 18mm thick HDHRM Board. The table top, side and Frame of center table is made up of 18 mm thick HDHRM board finished with 1 mm thick laminate. All edges is finhed with teak wood leaping or 2mm thick edge moulding as directed by EIC of College. SS. Fitting Make:- JINDAL, OZONE, DORMA HDHRMBoard Make:- ACTION tesa, Century, Greenply. Laminate Make:-Merino, Greenlam, Century & Durian. |
| 174 | Providing making and fixing of shelves / partitions. All the shelves / partitions to made out of 19 mm HDHRM board with external surface including the edges laminated with of approved shade of 1 mm thick laminate as per direction of Engineer-in-Charge / Architect. HDHRMBoard Make:- ACTION tesa, Century, Greenply. Laminate Make:-Merino, Greenlam, Century & Durian. |
| 175 | chair for Faculty Room: Providing & Supplying ergonomically comfortable and aesthetically designed medium back chair. The back is made of Polypropylene and upholstered with breathable fabric tapestry. The seat is made of 12mm thick wooden ply & PU foam density 40+/-2 kg/m3 upholster with fabric tapestry. Seat and back joint by HRC sheet cover with PP below. Armrests are made of polypropylene and cantilever shape frame is made of CRCA metal pipe dia. 28.5mm x 2mm thick duly epoxy powder coated with 40-50 micron thickness. Seat Size depth-18" width-19" and back height -17". Overall height 35". Whole CRCA metal frame quality to meet desired strength and rigidity as directed by EIC of College. Make:- Godrej,Wipro, Geeken, Featherlite. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
