Military Engineer Services-MES has published Tender For Certain Repairs To Misc Br Works Plinth Protection Pathways At Sector C And D Under Age Br I Of Ge 865 Ews. Submission Date for this Tender is 29-04-2024. Road Work Tenders in Leh Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 22-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-04-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floor and pavings n"exc 15cm thickness (below or above ground level complete all as specified and as directed by Engr-in-Charge. |
| 2 | Demolition of cement concrete in any description and any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-Charge. |
| 3 | M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as plinth protection finished even and smooth with out using extra cement complete all as specified and as directed by Engr-in-Charge. |
| 4 | M&L Forming Contraction (Dummy) joints 50 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade "A" in plinth protection complete all as specified and as directed by Engr-in-Charge. |
| 5 | M & L for 100 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as in floor of hard standing finished even and smooth with out using extra cement complete all as specified and as directed by Engr-in-Charge. |
| 6 | M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade "A" in floor surface of hard standing complete all as specified and as directed by Engr-in-Charge. |
| 7 | M & L for 75mm PCC 1:3:6 type C-2 using 20mm graded aggregate as in sub base of floor complete all as specified and as directed by Engr-in-Charge. |
| 8 | M&l for PCC type D-2(1:4:8) using 40mm graded crushed aggregate as mass conc and filling of foundation complete all as specified and as directed by Engr-in-Charge. |
| 9 | M&L dressed granite or trapKerb stones roughly squared stones of size 20cm x 30 cm ,so that the maximum depression from a straight edge held against the dressed surface shall noot exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck finish ( rate included for removal of old damaged curb stones of any description) complete all as specified and as directed by Engr-in-Charge. |
| 10 | M&L for Cement concrete type B-2,1:4:8 (40mm graded aggreate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc complete all as specified and as directed by Engr-in-Charge. |
| 11 | M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 80mm thickiness M-40 grade complete all as specified and as directed by Engr-in-Charge.. |
| 12 | M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60mm thickiness M-35 grade complete all as specified and as directed by Engr-in-Charge.. |
| 13 | M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 40mm thickiness M-35 grade complete all as specified and as directed by Engr-in-Charge.. |
| 14 | M&L sand filling (50 mm average thickness) under floors in foundations and for laying Interlocking paver blocks including watering and consolidation complete all as specified and as directed by Engr-in-Charge.. |
| 15 | M&L for Cement concrete type B-2,1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc complete all as specified and as directed by Engr-in-Charge. |
| 16 | M&L forChequred cement concrete tiles 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments .Layed over 20mm thick cement screed base (1:6) and complete all as specified and as directed by Engr-in-Charge. |
| 17 | Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etccomplete all as specified and as directed by Engr-in-Charge. |
| 18 | M&L for 15mm thick rendering on other than fair faces of brick works in two layers 10 mm & 5 mm thick using water proofing compound for outer layer of 5mm thickfinished even and fair without using extra cement in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge. |
| 19 | M&L for preperation of new plastered wall surface of any description and applying three coat of white wash complete all as specified and as directed by Engr-in-Charge. |
| 20 | M&L for preperation of new plastered wallsurface of any description and applayng two coat of cement based paintcomplete all as specified and as directed by Engr-in-Charge. |
| 21 | M&L for preparation new steel surfaces of any description, not otherwise described, over 10cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and as directed by Engr-in-Charge. |
| 22 | M&L for preperation of new surfaces on Brick,Concrete,Wall and Stone surface of any descripton and applying two coat of synthetic enamal paint over one coat of primercomplete all as specified and as directed by Engr-in-Charge. |
| 23 | M&L for preperation of old plastered wall surface of any description and applayng two coat of white wash complete all as specified and as directed by Engr-in-Charge. |
| 24 | M&L for preperation of old plastered wallsurface of any description and applayng one coat of cement based paint complete all as specified and as directed by Engr-in-Charge. |
| 25 | M&L for Dismantling chain link fencing/expanded metal or mesh not exceeding 4kg/Sqmfixed in steel, wood fillets, concrete post etc. of any description complete all as specified and as directed by Engr-in-Charge. |
| 26 | M&L for Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engr-in-Charge. |
| 27 | M&L for Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc complete all as specified and as directed by Engr-in-Charge. |
| 28 | M&L for Demolition of stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc and removing demolised material out of Military station complete all as specified and as directed by Engr-in-Charge. |
| 29 | M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge. |
| 30 | Ditto all as above ser No 29 but except blocks complete all as specified and as directed by Engr-in-Charge. |
| 31 | M&Lrandom rubble stone masonary well bonded bedded solidily hearted in CM 1:6 complete all as specified and as directed by Engr-in-Charge. |
| 32 | -ditto- all as above ser No 31but except stones complete all as specified and as directed by Engr-in-Charge. |
| 33 | M&L for Extra over stone walling for hammer dressing for lime sand store n"exc 40mm deep when held against edge ccomplete all as specified and as directed by Engr-in-Charge. |
| 34 | M&L for Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed by Engr-in-Charge. |
| 35 | M&L for Dismantlng wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etcunder 40 Sq.cm in secton.(Framed work) complete all as specified and as directed by Engr-in-Charge. |
| 36 | S&F anodised aluminium snap grid of size 605 x 605mm , frame work of false ceiling including hangers 6mm dia G.I (up to 1200mm length ) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed by Engr -in-charge. |
| 37 | M&L providing and fixing Gypsum board 6mm thick and 600x600mm in size in ceiling fixed with screw or with staples on snap grid as per manufactures instructions, complete all as specified and directed by Engr-in-charge |
| 38 | M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & liningfixed with nails exc 13 sqcm and n exc 25 sqcm in section.complete all as specified and as directed by Engr-in-Charge. |
| 39 | M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section complete all as specified and as directed by Engr-in-Charge. |
| 40 | M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws complete all as specified and as directed by Engr-in-Charge. |
| 41 | M&L in repairfor9mm thick prelaminated particle boardmedium interior grade, prelaminated oneside with decorated choice lamination & other side balancing whitelamination fixed with screws to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed by Engr-in-Charge. |
| 42 | M&L in repairfor9mm thick prelaminated particle boardmedium interior grade, prelaminated oneside with decorated choice lamination & other side balancing whitelamination fixed with screws to timber frame work as in ceiling panelling, shelves/boarding complete all as specified and as directed by Engr-in-Charge. |
| 43 | M&L for Dismantling boarding / wooden flooring of any description ,fixed in any positon complete all as specified and as directed by Engr-in-Charge. |
| 44 | M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated , including backing with thermocol sheets or as specified by manufacture complete all as specified and as directed by Engr-in-Charge. |
| 45 | M & L for Excavating in postholes in so(or similar holes) each n.exc 0.5 cum in hard/dense soil , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm complete all as specified and as directed by Engr-in-Charge. |
| 46 | M&L for PCC type D-2, (1:3:6) , using 40mm graded crushed stone aggregate as in lean conc , sub base ,or mass concrete , foundation filling etc complete all as specified and as directed by Engr-in-Charge. |
| 47 | Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards,rails, straining bolts,etc.including provision of binding wire complete all as specified and as directed by Engr-in-Charge. |
| 48 | Supply only chain link MS galvanised fencing of size as directed by Engr-in- complete all as specified and as directed by Engr-in-Charge. |
| 49 | S&F MS Wind ties for roof including securing bolts, posts & struts for fencing including cutting tops to shapes as directed,including all necessary drilling,bolting or reveting etc and similar workconfirming to Fe-290, Gde-E-165complete all as specified and as directed by Engr-in-Charge. |
| 50 | S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering.Doors, etc, to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel,) sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complet, Fe 410-W (Gde-E-250) quality A complete all as specified and as directed by Engr-in-Charge. |
| 51 | M&L for Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition),complete all as specified and as directed by Engr-in-Charge. |
| 52 | M&L for precast cement concrete Type C1, 1:3:6 (20mm graded aggregate) in lindings, cover slabs (for manholes etc), chullah hoods, chhajja, water troughs, shelves and similar articles with plain faces, setting in CM 1:6,complete all as specified and as directed by Engr-in-Charge. |
| 53 | M&L Mild steel TMT bars10mm dia and over (for tie bar of chain link fencing), cut length, bent to shape required , includingcranking , bending spirallyfor hoopingfor coloumns, hooking endsand binding with and includingmild steel wire (annealed) not less than0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
